openwrtv3/target/linux/brcm63xx/dts/ar-5315u.dts
Daniel Gonzalez Cabanelas c7b4b4cee2 brcm63xx: Add Comtrend AR-5315u support
Add support for the Comtrend AR-5315u router

This a BCM6318 based board, 64 MB RAM, 16 MB SPI flash,
with an onboard BCM43217 wifi, 4 ethernet ports and 1
USB host port

Signed-off-by: Daniel Gonzalez Cabanelas <dgcbueu@gmail.com>
[jonas.gorski: refreshed patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
2017-08-26 12:03:55 +02:00

106 lines
1.8 KiB
Text

/dts-v1/;
#include "bcm6318.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "Comtrend AR-5315u";
compatible = "comtrend,ar-5315u", "brcm,bcm6318";
chosen {
bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
debounce-interval = <60>;
wps {
label = "wps";
gpios = <&pinctrl 3 1>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&pinctrl 33 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
wps_green {
label = "AR-5315u:green:wps";
gpios = <&pinctrl 0 1>;
};
power_green {
label = "AR-5315u:green:power";
gpios = <&pinctrl 1 1>;
default-state = "on";
};
usb_green {
label = "AR-5315u:green:usb";
gpios = <&pinctrl 2 1>;
};
inet_green {
label = "AR-5315u:green:inet";
gpios = <&pinctrl 8 1>;
};
inet_red {
label = "AR-5315u:red:inet";
gpios = <&pinctrl 9 1>;
};
dsl_green {
label = "AR-5315u:green:dsl";
gpios = <&pinctrl 10 1>;
};
power_red {
label = "AR-5315u:red:power";
gpios = <&pinctrl 11 1>;
};
};
};
&hsspi {
status = "ok";
flash@0 {
compatible = "jedec,spi-nor";
spi-max-frequency = <62500000>;
spi-tx-bus-width = <2>;
spi-rx-bus-width = <2>;
reg = <0>;
#address-cells = <1>;
#size-cells = <1>;
linux,part-probe = "bcm63xxpart";
cfe@0 {
reg = <0x000000 0x010000>;
label = "cfe";
read-only;
};
linux@10000 {
reg = <0x010000 0xfe0000>;
label = "linux";
};
nvram@ff0000 {
reg = <0xff0000 0x010000>;
label = "nvram";
};
};
};
&pinctrl {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ephy0_act_led &pinctrl_ephy1_act_led
&pinctrl_ephy2_act_led &pinctrl_ephy3_act_led>;
};