KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-rb4xx.c
Gabor Juhos 82cc439976 ar71xx: remove obsolete '< KERNEL_VERSION(4, 4, 0)' check 
Because the oldest supported kernel version on the ar71xx target is 4.4,
the condition that the kernel version is smaller than 4.4.0 is always
false. Remove the obsolete check from mach-rb4xx.c to clean up the code
a bit.

Signed-off-by: Gabor Juhos <juhosg@freemail.hu>
2018-01-09 21:33:19 +01:00

465 lines
11 KiB
C
Raw Blame History

/*
* MikroTik RouterBOARD 4xx series support
*
* Copyright (C) 2008-2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/irq.h>
#include <linux/platform_data/mdio-gpio.h>
#include <linux/mmc/host.h>
#include <linux/spi/spi.h>
#include <linux/spi/flash.h>
#include <linux/spi/mmc_spi.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/rb4xx_cpld.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-usb.h"
#include "machtypes.h"
#include "pci.h"
#define RB4XX_GPIO_USER_LED 4
#define RB4XX_GPIO_RESET_SWITCH 7
#define RB4XX_GPIO_CPLD_BASE 32
#define RB4XX_GPIO_CPLD_LED1 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED1)
#define RB4XX_GPIO_CPLD_LED2 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED2)
#define RB4XX_GPIO_CPLD_LED3 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED3)
#define RB4XX_GPIO_CPLD_LED4 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED4)
#define RB4XX_GPIO_CPLD_LED5 (RB4XX_GPIO_CPLD_BASE + CPLD_GPIO_nLED5)
#define RB4XX_KEYS_POLL_INTERVAL 20 /* msecs */
#define RB4XX_KEYS_DEBOUNCE_INTERVAL (3 * RB4XX_KEYS_POLL_INTERVAL)
static struct gpio_led rb4xx_leds_gpio[] __initdata = {
{
.name = "rb4xx:yellow:user",
.gpio = RB4XX_GPIO_USER_LED,
.active_low = 0,
}, {
.name = "rb4xx:green:led1",
.gpio = RB4XX_GPIO_CPLD_LED1,
.active_low = 1,
}, {
.name = "rb4xx:green:led2",
.gpio = RB4XX_GPIO_CPLD_LED2,
.active_low = 1,
}, {
.name = "rb4xx:green:led3",
.gpio = RB4XX_GPIO_CPLD_LED3,
.active_low = 1,
}, {
.name = "rb4xx:green:led4",
.gpio = RB4XX_GPIO_CPLD_LED4,
.active_low = 1,
}, {
.name = "rb4xx:green:led5",
.gpio = RB4XX_GPIO_CPLD_LED5,
.active_low = 0,
},
};
static struct gpio_keys_button rb4xx_gpio_keys[] __initdata = {
{
.desc = "reset_switch",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = RB4XX_KEYS_DEBOUNCE_INTERVAL,
.gpio = RB4XX_GPIO_RESET_SWITCH,
.active_low = 1,
}
};
static struct platform_device rb4xx_nand_device = {
.name = "rb4xx-nand",
.id = -1,
};
static struct ath79_pci_irq rb4xx_pci_irqs[] __initdata = {
{
.slot = 17,
.pin = 1,
.irq = ATH79_PCI_IRQ(2),
}, {
.slot = 18,
.pin = 1,
.irq = ATH79_PCI_IRQ(0),
}, {
.slot = 18,
.pin = 2,
.irq = ATH79_PCI_IRQ(1),
}, {
.slot = 19,
.pin = 1,
.irq = ATH79_PCI_IRQ(1),
}, {
.slot = 19,
.pin = 2,
.irq = ATH79_PCI_IRQ(2),
}, {
.slot = 20,
.pin = 1,
.irq = ATH79_PCI_IRQ(2),
}, {
.slot = 20,
.pin = 2,
.irq = ATH79_PCI_IRQ(0),
}, {
.slot = 21,
.pin = 1,
.irq = ATH79_PCI_IRQ(0),
}, {
.slot = 22,
.pin = 1,
.irq = ATH79_PCI_IRQ(1),
}, {
.slot = 22,
.pin = 2,
.irq = ATH79_PCI_IRQ(2),
}, {
.slot = 23,
.pin = 1,
.irq = ATH79_PCI_IRQ(2),
}, {
.slot = 23,
.pin = 2,
.irq = ATH79_PCI_IRQ(0),
}
};
static struct mtd_partition rb4xx_partitions[] = {
{
.name = "routerboot",
.offset = 0,
.size = 0x0b000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "hard_config",
.offset = 0x0b000,
.size = 0x01000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "bios",
.offset = 0x0d000,
.size = 0x02000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "soft_config",
.offset = 0x0f000,
.size = 0x01000,
}
};
static struct flash_platform_data rb4xx_flash_data = {
.type = "pm25lv512",
.parts = rb4xx_partitions,
.nr_parts = ARRAY_SIZE(rb4xx_partitions),
};
static struct rb4xx_cpld_platform_data rb4xx_cpld_data = {
.gpio_base = RB4XX_GPIO_CPLD_BASE,
};
static struct mmc_spi_platform_data rb4xx_mmc_data = {
.ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34,
};
static struct spi_board_info rb4xx_spi_info[] = {
{
.bus_num = 0,
.chip_select = 0,
.max_speed_hz = 25000000,
.modalias = "m25p80",
.platform_data = &rb4xx_flash_data,
}, {
.bus_num = 0,
.chip_select = 1,
.max_speed_hz = 25000000,
.modalias = "spi-rb4xx-cpld",
.platform_data = &rb4xx_cpld_data,
}
};
static struct spi_board_info rb4xx_microsd_info[] = {
{
.bus_num = 0,
.chip_select = 2,
.max_speed_hz = 25000000,
.modalias = "mmc_spi",
.platform_data = &rb4xx_mmc_data,
}
};
static struct resource rb4xx_spi_resources[] = {
{
.start = AR71XX_SPI_BASE,
.end = AR71XX_SPI_BASE + AR71XX_SPI_SIZE - 1,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device rb4xx_spi_device = {
.name = "rb4xx-spi",
.id = -1,
.resource = rb4xx_spi_resources,
.num_resources = ARRAY_SIZE(rb4xx_spi_resources),
};
static void __init rb4xx_generic_setup(void)
{
ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
AR71XX_GPIO_FUNC_SPI_CS2_EN);
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
ath79_register_gpio_keys_polled(-1, RB4XX_KEYS_POLL_INTERVAL,
ARRAY_SIZE(rb4xx_gpio_keys),
rb4xx_gpio_keys);
spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
platform_device_register(&rb4xx_spi_device);
platform_device_register(&rb4xx_nand_device);
}
static void __init rb411_setup(void)
{
rb4xx_generic_setup();
spi_register_board_info(rb4xx_microsd_info,
ARRAY_SIZE(rb4xx_microsd_info));
ath79_register_mdio(0, 0xfffffffc);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = 0x00000003;
ath79_register_eth(0);
ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_RB_411, "411", "MikroTik RouterBOARD 411/A/AH",
rb411_setup);
static void __init rb411u_setup(void)
{
rb411_setup();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_RB_411U, "411U", "MikroTik RouterBOARD 411U",
rb411u_setup);
#define RB433_LAN_PHYMASK BIT(0)
#define RB433_WAN_PHYMASK BIT(4)
#define RB433_MDIO_PHYMASK (RB433_LAN_PHYMASK | RB433_WAN_PHYMASK)
static void __init rb433_setup(void)
{
rb4xx_generic_setup();
spi_register_board_info(rb4xx_microsd_info,
ARRAY_SIZE(rb4xx_microsd_info));
ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
ath79_register_eth(1);
ath79_register_eth(0);
ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_RB_433, "433", "MikroTik RouterBOARD 433/AH",
rb433_setup);
static void __init rb433u_setup(void)
{
rb433_setup();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_RB_433U, "433U", "MikroTik RouterBOARD 433UAH",
rb433u_setup);
static void __init rb435g_setup(void)
{
rb4xx_generic_setup();
spi_register_board_info(rb4xx_microsd_info,
ARRAY_SIZE(rb4xx_microsd_info));
ath79_register_mdio(0, ~RB433_MDIO_PHYMASK);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = RB433_LAN_PHYMASK;
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.phy_mask = RB433_WAN_PHYMASK;
ath79_register_eth(1);
ath79_register_eth(0);
ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
ath79_register_pci();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_RB_435G, "435G", "MikroTik RouterBOARD 435G",
rb435g_setup);
#define RB450_LAN_PHYMASK BIT(0)
#define RB450_WAN_PHYMASK BIT(4)
#define RB450_MDIO_PHYMASK (RB450_LAN_PHYMASK | RB450_WAN_PHYMASK)
static void __init rb450_generic_setup(int gige)
{
rb4xx_generic_setup();
ath79_register_mdio(0, ~RB450_MDIO_PHYMASK);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 1);
ath79_eth0_data.phy_if_mode = (gige) ?
PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = RB450_LAN_PHYMASK;
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 0);
ath79_eth1_data.phy_if_mode = (gige) ?
PHY_INTERFACE_MODE_RGMII : PHY_INTERFACE_MODE_RMII;
ath79_eth1_data.phy_mask = RB450_WAN_PHYMASK;
ath79_register_eth(1);
ath79_register_eth(0);
}
static void __init rb450_setup(void)
{
rb450_generic_setup(0);
}
MIPS_MACHINE(ATH79_MACH_RB_450, "450", "MikroTik RouterBOARD 450",
rb450_setup);
static void __init rb450g_setup(void)
{
rb450_generic_setup(1);
spi_register_board_info(rb4xx_microsd_info,
ARRAY_SIZE(rb4xx_microsd_info));
}
MIPS_MACHINE(ATH79_MACH_RB_450G, "450G", "MikroTik RouterBOARD 450G",
rb450g_setup);
static void __init rb493_setup(void)
{
rb4xx_generic_setup();
ath79_register_mdio(0, 0x3fffff00);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.speed = SPEED_100;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
ath79_eth1_data.phy_mask = 0x00000001;
ath79_register_eth(0);
ath79_register_eth(1);
ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_RB_493, "493", "MikroTik RouterBOARD 493/AH",
rb493_setup);
#define RB493G_GPIO_MDIO_MDC 7
#define RB493G_GPIO_MDIO_DATA 8
#define RB493G_MDIO_PHYMASK BIT(0)
static struct mdio_gpio_platform_data rb493g_mdio_data = {
.mdc = RB493G_GPIO_MDIO_MDC,
.mdio = RB493G_GPIO_MDIO_DATA,
.phy_mask = ~RB493G_MDIO_PHYMASK,
};
static struct platform_device rb493g_mdio_device = {
.name = "mdio-gpio",
.id = -1,
.dev = {
.platform_data = &rb493g_mdio_data,
},
};
static void __init rb493g_setup(void)
{
ath79_gpio_function_enable(AR71XX_GPIO_FUNC_SPI_CS1_EN |
AR71XX_GPIO_FUNC_SPI_CS2_EN);
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb4xx_leds_gpio),
rb4xx_leds_gpio);
spi_register_board_info(rb4xx_spi_info, ARRAY_SIZE(rb4xx_spi_info));
spi_register_board_info(rb4xx_microsd_info,
ARRAY_SIZE(rb4xx_microsd_info));
platform_device_register(&rb4xx_spi_device);
platform_device_register(&rb4xx_nand_device);
ath79_register_mdio(0, ~RB493G_MDIO_PHYMASK);
ath79_init_mac(ath79_eth0_data.mac_addr, ath79_mac_base, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.phy_mask = RB493G_MDIO_PHYMASK;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_init_mac(ath79_eth1_data.mac_addr, ath79_mac_base, 1);
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth1_data.mii_bus_dev = &rb493g_mdio_device.dev;
ath79_eth1_data.phy_mask = RB493G_MDIO_PHYMASK;
ath79_eth1_data.speed = SPEED_1000;
ath79_eth1_data.duplex = DUPLEX_FULL;
platform_device_register(&rb493g_mdio_device);
ath79_register_eth(1);
ath79_register_eth(0);
ath79_register_usb();
ath79_pci_set_irq_map(ARRAY_SIZE(rb4xx_pci_irqs), rb4xx_pci_irqs);
ath79_register_pci();
}
MIPS_MACHINE(ATH79_MACH_RB_493G, "493G", "MikroTik RouterBOARD 493G",
rb493g_setup);
Reference in a new issue View git blame Copy permalink