openwrtv3/target/linux/ramips/dts/ASL26555-16M.dts
John Crispin 7bfab6e308 ramips: Add Alpha ASL-26555 support.
This board uses a TrendChip SOC with its own RAM/Flash for ADSL support.
We know both SOCs are connected through ethernet and use some kind of protocol for UART communication, but due to the lack of GPL sources we couldn't get it to work. For this reason the network is configured only for LAN.

There are two versions (Chile 8MB and Spain 16MB).

Wiki: http://wiki.openwrt.org/toh/alpha/asl26555

Signed-off-by: Esteban Benito <estebanjbs@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3571/
Acked-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36433
2013-04-25 19:02:53 +00:00

138 lines
2.3 KiB
Text

/dts-v1/;
/include/ "rt3050.dtsi"
/ {
compatible = "ASL26555", "ralink,rt3050-soc";
model = "Alpha ASL26555";
palmbus@10000000 {
sysc@0 {
ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii";
ralink,gpiomux = "i2c", "jtag";
ralink,uartmux = "gpio";
ralink,wdtmux = <1>;
};
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "s25sl12801";
reg = <0 0>;
linux,modalias = "m25p80", "s25sl12801";
spi-max-frequency = <10000000>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xf80000>;
};
partition@fd0000 {
label = "cert";
reg = <0xfd0000 0x10000>;
read-only;
};
partition@fe0000 {
label = "langpack";
reg = <0xfe0000 0x10000>;
read-only;
};
partition@ff0000 {
label = "devdata";
reg = <0xff0000 0x10000>;
read-only;
};
};
};
};
ethernet@10100000 {
status = "okay";
};
esw@10110000 {
status = "okay";
ralink,portmap = <0x1e>;
};
wmac@10180000 {
status = "okay";
};
otg@101c0000 {
status = "okay";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 10 0>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio0 12 0>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
eth {
label = "asl26555:green:eth";
gpios = <&gpio0 0 1>;
};
wan-red {
label = "asl26555:red:wan";
gpios = <&gpio0 1 0>;
};
wan-green {
label = "asl26555:green:wan";
gpios = <&gpio0 2 0>;
};
wlan {
label = "asl26555:green:wlan";
gpios = <&gpio0 7 0>;
};
power-green {
label = "asl26555:green:power";
gpios = <&gpio0 8 0>;
};
power-red {
label = "asl26555:red:power";
gpios = <&gpio0 9 0>;
};
3g-green {
label = "asl26555:green:3g";
gpios = <&gpio0 14 1>;
};
3g-red {
label = "asl26555:red:3g";
gpios = <&gpio0 17 1>;
};
};
};