openwrtv3/target/linux/ipq806x/patches-4.9/710-net-add-qualcomm-essedma-ethernet-driver.patch
Christian Lamparter c2d50bdeb3 ipq806x: add ipq4019 support
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John Crispin <john@phrozen.org>
2017-03-22 09:45:18 +01:00

4602 lines
133 KiB
Diff

From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
From: Christian Lamparter <chunkeey@googlemail.com>
Date: Thu, 19 Jan 2017 02:01:31 +0100
Subject: [PATCH 33/38] NET: add qualcomm essedma ethernet driver
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
---
drivers/net/ethernet/qualcomm/Kconfig | 9 +++++++++
drivers/net/ethernet/qualcomm/Makefile | 1 +
2 files changed, 10 insertions(+)
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
@@ -37,4 +37,13 @@ config QCOM_EMAC
low power, Receive-Side Scaling (RSS), and IEEE 1588-2008
Precision Clock Synchronization Protocol.
+config ESSEDMA
+ tristate "Qualcomm Atheros ESS Edma support"
+ ---help---
+ This driver supports ethernet edma adapter.
+ Say Y to build this driver.
+
+ To compile this driver as a module, choose M here. The module
+ will be called essedma.ko.
+
endif # NET_VENDOR_QUALCOMM
--- a/drivers/net/ethernet/qualcomm/Makefile
+++ b/drivers/net/ethernet/qualcomm/Makefile
@@ -6,3 +6,4 @@ obj-$(CONFIG_QCA7000) += qcaspi.o
qcaspi-objs := qca_spi.o qca_framing.o qca_7k.o qca_debug.o
obj-y += emac/
+obj-$(CONFIG_ESSEDMA) += essedma/
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/Makefile
@@ -0,0 +1,9 @@
+#
+## Makefile for the Qualcomm Atheros ethernet edma driver
+#
+
+
+obj-$(CONFIG_ESSEDMA) += essedma.o
+
+essedma-objs := edma_axi.o edma.o edma_ethtool.o
+
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.c
@@ -0,0 +1,2168 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/if_vlan.h>
+#include "ess_edma.h"
+#include "edma.h"
+
+extern struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
+bool edma_stp_rstp;
+u16 edma_ath_eth_type;
+
+/* edma_skb_priority_offset()
+ * get edma skb priority
+ */
+static unsigned int edma_skb_priority_offset(struct sk_buff *skb)
+{
+ return (skb->priority >> 2) & 1;
+}
+
+/* edma_alloc_tx_ring()
+ * Allocate Tx descriptors ring
+ */
+static int edma_alloc_tx_ring(struct edma_common_info *edma_cinfo,
+ struct edma_tx_desc_ring *etdr)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+
+ /* Initialize ring */
+ etdr->size = sizeof(struct edma_sw_desc) * etdr->count;
+ etdr->sw_next_to_fill = 0;
+ etdr->sw_next_to_clean = 0;
+
+ /* Allocate SW descriptors */
+ etdr->sw_desc = vzalloc(etdr->size);
+ if (!etdr->sw_desc) {
+ dev_err(&pdev->dev, "buffer alloc of tx ring failed=%p", etdr);
+ return -ENOMEM;
+ }
+
+ /* Allocate HW descriptors */
+ etdr->hw_desc = dma_alloc_coherent(&pdev->dev, etdr->size, &etdr->dma,
+ GFP_KERNEL);
+ if (!etdr->hw_desc) {
+ dev_err(&pdev->dev, "descriptor allocation for tx ring failed");
+ vfree(etdr->sw_desc);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/* edma_free_tx_ring()
+ * Free tx rings allocated by edma_alloc_tx_rings
+ */
+static void edma_free_tx_ring(struct edma_common_info *edma_cinfo,
+ struct edma_tx_desc_ring *etdr)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+
+ if (likely(etdr->dma))
+ dma_free_coherent(&pdev->dev, etdr->size, etdr->hw_desc,
+ etdr->dma);
+
+ vfree(etdr->sw_desc);
+ etdr->sw_desc = NULL;
+}
+
+/* edma_alloc_rx_ring()
+ * allocate rx descriptor ring
+ */
+static int edma_alloc_rx_ring(struct edma_common_info *edma_cinfo,
+ struct edma_rfd_desc_ring *erxd)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+
+ erxd->size = sizeof(struct edma_sw_desc) * erxd->count;
+ erxd->sw_next_to_fill = 0;
+ erxd->sw_next_to_clean = 0;
+
+ /* Allocate SW descriptors */
+ erxd->sw_desc = vzalloc(erxd->size);
+ if (!erxd->sw_desc)
+ return -ENOMEM;
+
+ /* Alloc HW descriptors */
+ erxd->hw_desc = dma_alloc_coherent(&pdev->dev, erxd->size, &erxd->dma,
+ GFP_KERNEL);
+ if (!erxd->hw_desc) {
+ vfree(erxd->sw_desc);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+/* edma_free_rx_ring()
+ * Free rx ring allocated by alloc_rx_ring
+ */
+static void edma_free_rx_ring(struct edma_common_info *edma_cinfo,
+ struct edma_rfd_desc_ring *rxdr)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+
+ if (likely(rxdr->dma))
+ dma_free_coherent(&pdev->dev, rxdr->size, rxdr->hw_desc,
+ rxdr->dma);
+
+ vfree(rxdr->sw_desc);
+ rxdr->sw_desc = NULL;
+}
+
+/* edma_configure_tx()
+ * Configure transmission control data
+ */
+static void edma_configure_tx(struct edma_common_info *edma_cinfo)
+{
+ u32 txq_ctrl_data;
+
+ txq_ctrl_data = (EDMA_TPD_BURST << EDMA_TXQ_NUM_TPD_BURST_SHIFT);
+ txq_ctrl_data |= EDMA_TXQ_CTRL_TPD_BURST_EN;
+ txq_ctrl_data |= (EDMA_TXF_BURST << EDMA_TXQ_TXF_BURST_NUM_SHIFT);
+ edma_write_reg(EDMA_REG_TXQ_CTRL, txq_ctrl_data);
+}
+
+
+/* edma_configure_rx()
+ * configure reception control data
+ */
+static void edma_configure_rx(struct edma_common_info *edma_cinfo)
+{
+ struct edma_hw *hw = &edma_cinfo->hw;
+ u32 rss_type, rx_desc1, rxq_ctrl_data;
+
+ /* Set RSS type */
+ rss_type = hw->rss_type;
+ edma_write_reg(EDMA_REG_RSS_TYPE, rss_type);
+
+ /* Set RFD burst number */
+ rx_desc1 = (EDMA_RFD_BURST << EDMA_RXQ_RFD_BURST_NUM_SHIFT);
+
+ /* Set RFD prefetch threshold */
+ rx_desc1 |= (EDMA_RFD_THR << EDMA_RXQ_RFD_PF_THRESH_SHIFT);
+
+ /* Set RFD in host ring low threshold to generte interrupt */
+ rx_desc1 |= (EDMA_RFD_LTHR << EDMA_RXQ_RFD_LOW_THRESH_SHIFT);
+ edma_write_reg(EDMA_REG_RX_DESC1, rx_desc1);
+
+ /* Set Rx FIFO threshold to start to DMA data to host */
+ rxq_ctrl_data = EDMA_FIFO_THRESH_128_BYTE;
+
+ /* Set RX remove vlan bit */
+ rxq_ctrl_data |= EDMA_RXQ_CTRL_RMV_VLAN;
+
+ edma_write_reg(EDMA_REG_RXQ_CTRL, rxq_ctrl_data);
+}
+
+/* edma_alloc_rx_buf()
+ * does skb allocation for the received packets.
+ */
+static int edma_alloc_rx_buf(struct edma_common_info
+ *edma_cinfo,
+ struct edma_rfd_desc_ring *erdr,
+ int cleaned_count, int queue_id)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+ struct edma_rx_free_desc *rx_desc;
+ struct edma_sw_desc *sw_desc;
+ struct sk_buff *skb;
+ unsigned int i;
+ u16 prod_idx, length;
+ u32 reg_data;
+
+ if (cleaned_count > erdr->count) {
+ dev_err(&pdev->dev, "Incorrect cleaned_count %d",
+ cleaned_count);
+ return -1;
+ }
+
+ i = erdr->sw_next_to_fill;
+
+ while (cleaned_count) {
+ sw_desc = &erdr->sw_desc[i];
+ length = edma_cinfo->rx_head_buffer_len;
+
+ if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_REUSE) {
+ skb = sw_desc->skb;
+ } else {
+ /* alloc skb */
+ skb = netdev_alloc_skb(edma_netdev[0], length);
+ if (!skb) {
+ /* Better luck next round */
+ break;
+ }
+ }
+
+ if (edma_cinfo->page_mode) {
+ struct page *pg = alloc_page(GFP_ATOMIC);
+
+ if (!pg) {
+ dev_kfree_skb_any(skb);
+ break;
+ }
+
+ sw_desc->dma = dma_map_page(&pdev->dev, pg, 0,
+ edma_cinfo->rx_page_buffer_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev,
+ sw_desc->dma)) {
+ __free_page(pg);
+ dev_kfree_skb_any(skb);
+ break;
+ }
+
+ skb_fill_page_desc(skb, 0, pg, 0,
+ edma_cinfo->rx_page_buffer_len);
+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_FRAG;
+ sw_desc->length = edma_cinfo->rx_page_buffer_len;
+ } else {
+ sw_desc->dma = dma_map_single(&pdev->dev, skb->data,
+ length, DMA_FROM_DEVICE);
+ if (dma_mapping_error(&pdev->dev,
+ sw_desc->dma)) {
+ dev_kfree_skb_any(skb);
+ break;
+ }
+
+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_HEAD;
+ sw_desc->length = length;
+ }
+
+ /* Update the buffer info */
+ sw_desc->skb = skb;
+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[i]);
+ rx_desc->buffer_addr = cpu_to_le64(sw_desc->dma);
+ if (++i == erdr->count)
+ i = 0;
+ cleaned_count--;
+ }
+
+ erdr->sw_next_to_fill = i;
+
+ if (i == 0)
+ prod_idx = erdr->count - 1;
+ else
+ prod_idx = i - 1;
+
+ /* Update the producer index */
+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &reg_data);
+ reg_data &= ~EDMA_RFD_PROD_IDX_BITS;
+ reg_data |= prod_idx;
+ edma_write_reg(EDMA_REG_RFD_IDX_Q(queue_id), reg_data);
+ return cleaned_count;
+}
+
+/* edma_init_desc()
+ * update descriptor ring size, buffer and producer/consumer index
+ */
+static void edma_init_desc(struct edma_common_info *edma_cinfo)
+{
+ struct edma_rfd_desc_ring *rfd_ring;
+ struct edma_tx_desc_ring *etdr;
+ int i = 0, j = 0;
+ u32 data = 0;
+ u16 hw_cons_idx = 0;
+
+ /* Set the base address of every TPD ring. */
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+ etdr = edma_cinfo->tpd_ring[i];
+
+ /* Update descriptor ring base address */
+ edma_write_reg(EDMA_REG_TPD_BASE_ADDR_Q(i), (u32)etdr->dma);
+ edma_read_reg(EDMA_REG_TPD_IDX_Q(i), &data);
+
+ /* Calculate hardware consumer index */
+ hw_cons_idx = (data >> EDMA_TPD_CONS_IDX_SHIFT) & 0xffff;
+ etdr->sw_next_to_fill = hw_cons_idx;
+ etdr->sw_next_to_clean = hw_cons_idx;
+ data &= ~(EDMA_TPD_PROD_IDX_MASK << EDMA_TPD_PROD_IDX_SHIFT);
+ data |= hw_cons_idx;
+
+ /* update producer index */
+ edma_write_reg(EDMA_REG_TPD_IDX_Q(i), data);
+
+ /* update SW consumer index register */
+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(i), hw_cons_idx);
+
+ /* Set TPD ring size */
+ edma_write_reg(EDMA_REG_TPD_RING_SIZE,
+ edma_cinfo->tx_ring_count &
+ EDMA_TPD_RING_SIZE_MASK);
+ }
+
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ rfd_ring = edma_cinfo->rfd_ring[j];
+ /* Update Receive Free descriptor ring base address */
+ edma_write_reg(EDMA_REG_RFD_BASE_ADDR_Q(j),
+ (u32)(rfd_ring->dma));
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+
+ data = edma_cinfo->rx_head_buffer_len;
+ if (edma_cinfo->page_mode)
+ data = edma_cinfo->rx_page_buffer_len;
+
+ data &= EDMA_RX_BUF_SIZE_MASK;
+ data <<= EDMA_RX_BUF_SIZE_SHIFT;
+
+ /* Update RFD ring size and RX buffer size */
+ data |= (edma_cinfo->rx_ring_count & EDMA_RFD_RING_SIZE_MASK)
+ << EDMA_RFD_RING_SIZE_SHIFT;
+
+ edma_write_reg(EDMA_REG_RX_DESC0, data);
+
+ /* Disable TX FIFO low watermark and high watermark */
+ edma_write_reg(EDMA_REG_TXF_WATER_MARK, 0);
+
+ /* Load all of base address above */
+ edma_read_reg(EDMA_REG_TX_SRAM_PART, &data);
+ data |= 1 << EDMA_LOAD_PTR_SHIFT;
+ edma_write_reg(EDMA_REG_TX_SRAM_PART, data);
+}
+
+/* edma_receive_checksum
+ * Api to check checksum on receive packets
+ */
+static void edma_receive_checksum(struct edma_rx_return_desc *rd,
+ struct sk_buff *skb)
+{
+ skb_checksum_none_assert(skb);
+
+ /* check the RRD IP/L4 checksum bit to see if
+ * its set, which in turn indicates checksum
+ * failure.
+ */
+ if (rd->rrd6 & EDMA_RRD_CSUM_FAIL_MASK)
+ return;
+
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+}
+
+/* edma_clean_rfd()
+ * clean up rx resourcers on error
+ */
+static void edma_clean_rfd(struct edma_rfd_desc_ring *erdr, u16 index)
+{
+ struct edma_rx_free_desc *rx_desc;
+ struct edma_sw_desc *sw_desc;
+
+ rx_desc = (&((struct edma_rx_free_desc *)(erdr->hw_desc))[index]);
+ sw_desc = &erdr->sw_desc[index];
+ if (sw_desc->skb) {
+ dev_kfree_skb_any(sw_desc->skb);
+ sw_desc->skb = NULL;
+ }
+
+ memset(rx_desc, 0, sizeof(struct edma_rx_free_desc));
+}
+
+/* edma_rx_complete_fraglist()
+ * Complete Rx processing for fraglist skbs
+ */
+static void edma_rx_complete_stp_rstp(struct sk_buff *skb, int port_id, struct edma_rx_return_desc *rd)
+{
+ int i;
+ u32 priority;
+ u16 port_type;
+ u8 mac_addr[EDMA_ETH_HDR_LEN];
+
+ port_type = (rd->rrd1 >> EDMA_RRD_PORT_TYPE_SHIFT)
+ & EDMA_RRD_PORT_TYPE_MASK;
+ /* if port type is 0x4, then only proceed with
+ * other stp/rstp calculation
+ */
+ if (port_type == EDMA_RX_ATH_HDR_RSTP_PORT_TYPE) {
+ u8 bpdu_mac[6] = {0x01, 0x80, 0xc2, 0x00, 0x00, 0x00};
+
+ /* calculate the frame priority */
+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
+ & EDMA_RRD_PRIORITY_MASK;
+
+ for (i = 0; i < EDMA_ETH_HDR_LEN; i++)
+ mac_addr[i] = skb->data[i];
+
+ /* Check if destination mac addr is bpdu addr */
+ if (!memcmp(mac_addr, bpdu_mac, 6)) {
+ /* destination mac address is BPDU
+ * destination mac address, then add
+ * atheros header to the packet.
+ */
+ u16 athr_hdr = (EDMA_RX_ATH_HDR_VERSION << EDMA_RX_ATH_HDR_VERSION_SHIFT) |
+ (priority << EDMA_RX_ATH_HDR_PRIORITY_SHIFT) |
+ (EDMA_RX_ATH_HDR_RSTP_PORT_TYPE << EDMA_RX_ATH_PORT_TYPE_SHIFT) | port_id;
+ skb_push(skb, 4);
+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
+ *(uint16_t *)&skb->data[12] = htons(edma_ath_eth_type);
+ *(uint16_t *)&skb->data[14] = htons(athr_hdr);
+ }
+ }
+}
+
+/*
+ * edma_rx_complete_fraglist()
+ * Complete Rx processing for fraglist skbs
+ */
+static int edma_rx_complete_fraglist(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+ struct edma_hw *hw = &edma_cinfo->hw;
+ struct sk_buff *skb_temp;
+ struct edma_sw_desc *sw_desc;
+ int i;
+ u16 size_remaining;
+
+ skb->data_len = 0;
+ skb->tail += (hw->rx_head_buff_size - 16);
+ skb->len = skb->truesize = length;
+ size_remaining = length - (hw->rx_head_buff_size - 16);
+
+ /* clean-up all related sw_descs */
+ for (i = 1; i < num_rfds; i++) {
+ struct sk_buff *skb_prev;
+ sw_desc = &erdr->sw_desc[sw_next_to_clean];
+ skb_temp = sw_desc->skb;
+
+ dma_unmap_single(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_FROM_DEVICE);
+
+ if (size_remaining < hw->rx_head_buff_size)
+ skb_put(skb_temp, size_remaining);
+ else
+ skb_put(skb_temp, hw->rx_head_buff_size);
+
+ /*
+ * If we are processing the first rfd, we link
+ * skb->frag_list to the skb corresponding to the
+ * first RFD
+ */
+ if (i == 1)
+ skb_shinfo(skb)->frag_list = skb_temp;
+ else
+ skb_prev->next = skb_temp;
+ skb_prev = skb_temp;
+ skb_temp->next = NULL;
+
+ skb->data_len += skb_temp->len;
+ size_remaining -= skb_temp->len;
+
+ /* Increment SW index */
+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+ (*cleaned_count)++;
+ }
+
+ return sw_next_to_clean;
+}
+
+/* edma_rx_complete_paged()
+ * Complete Rx processing for paged skbs
+ */
+static int edma_rx_complete_paged(struct sk_buff *skb, u16 num_rfds, u16 length, u32 sw_next_to_clean,
+ u16 *cleaned_count, struct edma_rfd_desc_ring *erdr, struct edma_common_info *edma_cinfo)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+ struct sk_buff *skb_temp;
+ struct edma_sw_desc *sw_desc;
+ int i;
+ u16 size_remaining;
+
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[0];
+
+ /* Setup skbuff fields */
+ skb->len = length;
+
+ if (likely(num_rfds <= 1)) {
+ skb->data_len = length;
+ skb->truesize += edma_cinfo->rx_page_buffer_len;
+ skb_fill_page_desc(skb, 0, skb_frag_page(frag),
+ 16, length);
+ } else {
+ frag->size -= 16;
+ skb->data_len = frag->size;
+ skb->truesize += edma_cinfo->rx_page_buffer_len;
+ size_remaining = length - frag->size;
+
+ skb_fill_page_desc(skb, 0, skb_frag_page(frag),
+ 16, frag->size);
+
+ /* clean-up all related sw_descs */
+ for (i = 1; i < num_rfds; i++) {
+ sw_desc = &erdr->sw_desc[sw_next_to_clean];
+ skb_temp = sw_desc->skb;
+ frag = &skb_shinfo(skb_temp)->frags[0];
+ dma_unmap_page(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_FROM_DEVICE);
+
+ if (size_remaining < edma_cinfo->rx_page_buffer_len)
+ frag->size = size_remaining;
+
+ skb_fill_page_desc(skb, i, skb_frag_page(frag),
+ 0, frag->size);
+
+ skb_shinfo(skb_temp)->nr_frags = 0;
+ dev_kfree_skb_any(skb_temp);
+
+ skb->data_len += frag->size;
+ skb->truesize += edma_cinfo->rx_page_buffer_len;
+ size_remaining -= frag->size;
+
+ /* Increment SW index */
+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+ (*cleaned_count)++;
+ }
+ }
+
+ return sw_next_to_clean;
+}
+
+/*
+ * edma_rx_complete()
+ * Main api called from the poll function to process rx packets.
+ */
+static void edma_rx_complete(struct edma_common_info *edma_cinfo,
+ int *work_done, int work_to_do, int queue_id,
+ struct napi_struct *napi)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+ struct edma_rfd_desc_ring *erdr = edma_cinfo->rfd_ring[queue_id];
+ struct net_device *netdev;
+ struct edma_adapter *adapter;
+ struct edma_sw_desc *sw_desc;
+ struct sk_buff *skb;
+ struct edma_rx_return_desc *rd;
+ u16 hash_type, rrd[8], cleaned_count = 0, length = 0, num_rfds = 1,
+ sw_next_to_clean, hw_next_to_clean = 0, vlan = 0, ret_count = 0;
+ u32 data = 0;
+ u8 *vaddr;
+ int port_id, i, drop_count = 0;
+ u32 priority;
+ u16 count = erdr->count, rfd_avail;
+ u8 queue_to_rxid[8] = {0, 0, 1, 1, 2, 2, 3, 3};
+
+ sw_next_to_clean = erdr->sw_next_to_clean;
+
+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
+ EDMA_RFD_CONS_IDX_MASK;
+
+ do {
+ while (sw_next_to_clean != hw_next_to_clean) {
+ if (!work_to_do)
+ break;
+
+ sw_desc = &erdr->sw_desc[sw_next_to_clean];
+ skb = sw_desc->skb;
+
+ /* Unmap the allocated buffer */
+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD))
+ dma_unmap_single(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_FROM_DEVICE);
+ else
+ dma_unmap_page(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_FROM_DEVICE);
+
+ /* Get RRD */
+ if (edma_cinfo->page_mode) {
+ vaddr = kmap_atomic(skb_frag_page(&skb_shinfo(skb)->frags[0]));
+ memcpy((uint8_t *)&rrd[0], vaddr, 16);
+ rd = (struct edma_rx_return_desc *)rrd;
+ kunmap_atomic(vaddr);
+ } else {
+ rd = (struct edma_rx_return_desc *)skb->data;
+ }
+
+ /* Check if RRD is valid */
+ if (!(rd->rrd7 & EDMA_RRD_DESC_VALID)) {
+ edma_clean_rfd(erdr, sw_next_to_clean);
+ sw_next_to_clean = (sw_next_to_clean + 1) &
+ (erdr->count - 1);
+ cleaned_count++;
+ continue;
+ }
+
+ /* Get the number of RFDs from RRD */
+ num_rfds = rd->rrd1 & EDMA_RRD_NUM_RFD_MASK;
+
+ /* Get Rx port ID from switch */
+ port_id = (rd->rrd1 >> EDMA_PORT_ID_SHIFT) & EDMA_PORT_ID_MASK;
+ if ((!port_id) || (port_id > EDMA_MAX_PORTID_SUPPORTED)) {
+ dev_err(&pdev->dev, "Invalid RRD source port bit set");
+ for (i = 0; i < num_rfds; i++) {
+ edma_clean_rfd(erdr, sw_next_to_clean);
+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+ cleaned_count++;
+ }
+ continue;
+ }
+
+ /* check if we have a sink for the data we receive.
+ * If the interface isn't setup, we have to drop the
+ * incoming data for now.
+ */
+ netdev = edma_cinfo->portid_netdev_lookup_tbl[port_id];
+ if (!netdev) {
+ edma_clean_rfd(erdr, sw_next_to_clean);
+ sw_next_to_clean = (sw_next_to_clean + 1) &
+ (erdr->count - 1);
+ cleaned_count++;
+ continue;
+ }
+ adapter = netdev_priv(netdev);
+
+ /* This code is added to handle a usecase where high
+ * priority stream and a low priority stream are
+ * received simultaneously on DUT. The problem occurs
+ * if one of the Rx rings is full and the corresponding
+ * core is busy with other stuff. This causes ESS CPU
+ * port to backpressure all incoming traffic including
+ * high priority one. We monitor free descriptor count
+ * on each CPU and whenever it reaches threshold (< 80),
+ * we drop all low priority traffic and let only high
+ * priotiy traffic pass through. We can hence avoid
+ * ESS CPU port to send backpressure on high priroity
+ * stream.
+ */
+ priority = (rd->rrd1 >> EDMA_RRD_PRIORITY_SHIFT)
+ & EDMA_RRD_PRIORITY_MASK;
+ if (likely(!priority && !edma_cinfo->page_mode && (num_rfds <= 1))) {
+ rfd_avail = (count + sw_next_to_clean - hw_next_to_clean - 1) & (count - 1);
+ if (rfd_avail < EDMA_RFD_AVAIL_THR) {
+ sw_desc->flags = EDMA_SW_DESC_FLAG_SKB_REUSE;
+ sw_next_to_clean = (sw_next_to_clean + 1) & (erdr->count - 1);
+ adapter->stats.rx_dropped++;
+ cleaned_count++;
+ drop_count++;
+ if (drop_count == 3) {
+ work_to_do--;
+ (*work_done)++;
+ drop_count = 0;
+ }
+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
+ /* If buffer clean count reaches 16, we replenish HW buffers. */
+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
+ sw_next_to_clean);
+ cleaned_count = ret_count;
+ }
+ continue;
+ }
+ }
+
+ work_to_do--;
+ (*work_done)++;
+
+ /* Increment SW index */
+ sw_next_to_clean = (sw_next_to_clean + 1) &
+ (erdr->count - 1);
+
+ cleaned_count++;
+
+ /* Get the packet size and allocate buffer */
+ length = rd->rrd6 & EDMA_RRD_PKT_SIZE_MASK;
+
+ if (edma_cinfo->page_mode) {
+ /* paged skb */
+ sw_next_to_clean = edma_rx_complete_paged(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
+ if (!pskb_may_pull(skb, ETH_HLEN)) {
+ dev_kfree_skb_any(skb);
+ continue;
+ }
+ } else {
+ /* single or fraglist skb */
+
+ /* Addition of 16 bytes is required, as in the packet
+ * first 16 bytes are rrd descriptors, so actual data
+ * starts from an offset of 16.
+ */
+ skb_reserve(skb, 16);
+ if (likely((num_rfds <= 1) || !edma_cinfo->fraglist_mode)) {
+ skb_put(skb, length);
+ } else {
+ sw_next_to_clean = edma_rx_complete_fraglist(skb, num_rfds, length, sw_next_to_clean, &cleaned_count, erdr, edma_cinfo);
+ }
+ }
+
+ if (edma_stp_rstp) {
+ edma_rx_complete_stp_rstp(skb, port_id, rd);
+ }
+
+ skb->protocol = eth_type_trans(skb, netdev);
+
+ /* Record Rx queue for RFS/RPS and fill flow hash from HW */
+ skb_record_rx_queue(skb, queue_to_rxid[queue_id]);
+ if (netdev->features & NETIF_F_RXHASH) {
+ hash_type = (rd->rrd5 >> EDMA_HASH_TYPE_SHIFT);
+ if ((hash_type > EDMA_HASH_TYPE_START) && (hash_type < EDMA_HASH_TYPE_END))
+ skb_set_hash(skb, rd->rrd2, PKT_HASH_TYPE_L4);
+ }
+
+#ifdef CONFIG_NF_FLOW_COOKIE
+ skb->flow_cookie = rd->rrd3 & EDMA_RRD_FLOW_COOKIE_MASK;
+#endif
+ edma_receive_checksum(rd, skb);
+
+ /* Process VLAN HW acceleration indication provided by HW */
+ if (unlikely(adapter->default_vlan_tag != rd->rrd4)) {
+ vlan = rd->rrd4;
+ if (likely(rd->rrd7 & EDMA_RRD_CVLAN))
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan);
+ else if (rd->rrd1 & EDMA_RRD_SVLAN)
+ __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), vlan);
+ }
+
+ /* Update rx statistics */
+ adapter->stats.rx_packets++;
+ adapter->stats.rx_bytes += length;
+
+ /* Check if we reached refill threshold */
+ if (cleaned_count == EDMA_RX_BUFFER_WRITE) {
+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
+ sw_next_to_clean);
+ cleaned_count = ret_count;
+ }
+
+ /* At this point skb should go to stack */
+ napi_gro_receive(napi, skb);
+ }
+
+ /* Check if we still have NAPI budget */
+ if (!work_to_do)
+ break;
+
+ /* Read index once again since we still have NAPI budget */
+ edma_read_reg(EDMA_REG_RFD_IDX_Q(queue_id), &data);
+ hw_next_to_clean = (data >> EDMA_RFD_CONS_IDX_SHIFT) &
+ EDMA_RFD_CONS_IDX_MASK;
+ } while (hw_next_to_clean != sw_next_to_clean);
+
+ erdr->sw_next_to_clean = sw_next_to_clean;
+
+ /* Refill here in case refill threshold wasn't reached */
+ if (likely(cleaned_count)) {
+ ret_count = edma_alloc_rx_buf(edma_cinfo, erdr, cleaned_count, queue_id);
+ if (ret_count)
+ dev_dbg(&pdev->dev, "Not all buffers was reallocated");
+ edma_write_reg(EDMA_REG_RX_SW_CONS_IDX_Q(queue_id),
+ erdr->sw_next_to_clean);
+ }
+}
+
+/* edma_delete_rfs_filter()
+ * Remove RFS filter from switch
+ */
+static int edma_delete_rfs_filter(struct edma_adapter *adapter,
+ struct edma_rfs_filter_node *filter_node)
+{
+ int res = -1;
+
+ struct flow_keys *keys = &filter_node->keys;
+
+ if (likely(adapter->set_rfs_rule))
+ res = (*adapter->set_rfs_rule)(adapter->netdev,
+ flow_get_u32_src(keys), flow_get_u32_dst(keys),
+ keys->ports.src, keys->ports.dst,
+ keys->basic.ip_proto, filter_node->rq_id, 0);
+
+ return res;
+}
+
+/* edma_add_rfs_filter()
+ * Add RFS filter to switch
+ */
+static int edma_add_rfs_filter(struct edma_adapter *adapter,
+ struct flow_keys *keys, u16 rq,
+ struct edma_rfs_filter_node *filter_node)
+{
+ int res = -1;
+
+ struct flow_keys *dest_keys = &filter_node->keys;
+
+ memcpy(dest_keys, &filter_node->keys, sizeof(*dest_keys));
+/*
+ dest_keys->control = keys->control;
+ dest_keys->basic = keys->basic;
+ dest_keys->addrs = keys->addrs;
+ dest_keys->ports = keys->ports;
+ dest_keys.ip_proto = keys->ip_proto;
+*/
+ /* Call callback registered by ESS driver */
+ if (likely(adapter->set_rfs_rule))
+ res = (*adapter->set_rfs_rule)(adapter->netdev, flow_get_u32_src(keys),
+ flow_get_u32_dst(keys), keys->ports.src, keys->ports.dst,
+ keys->basic.ip_proto, rq, 1);
+
+ return res;
+}
+
+/* edma_rfs_key_search()
+ * Look for existing RFS entry
+ */
+static struct edma_rfs_filter_node *edma_rfs_key_search(struct hlist_head *h,
+ struct flow_keys *key)
+{
+ struct edma_rfs_filter_node *p;
+
+ hlist_for_each_entry(p, h, node)
+ if (flow_get_u32_src(&p->keys) == flow_get_u32_src(key) &&
+ flow_get_u32_dst(&p->keys) == flow_get_u32_dst(key) &&
+ p->keys.ports.src == key->ports.src &&
+ p->keys.ports.dst == key->ports.dst &&
+ p->keys.basic.ip_proto == key->basic.ip_proto)
+ return p;
+ return NULL;
+}
+
+/* edma_initialise_rfs_flow_table()
+ * Initialise EDMA RFS flow table
+ */
+static void edma_initialise_rfs_flow_table(struct edma_adapter *adapter)
+{
+ int i;
+
+ spin_lock_init(&adapter->rfs.rfs_ftab_lock);
+
+ /* Initialize EDMA flow hash table */
+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++)
+ INIT_HLIST_HEAD(&adapter->rfs.hlist_head[i]);
+
+ adapter->rfs.max_num_filter = EDMA_RFS_FLOW_ENTRIES;
+ adapter->rfs.filter_available = adapter->rfs.max_num_filter;
+ adapter->rfs.hashtoclean = 0;
+
+ /* Add timer to get periodic RFS updates from OS */
+ init_timer(&adapter->rfs.expire_rfs);
+ adapter->rfs.expire_rfs.function = edma_flow_may_expire;
+ adapter->rfs.expire_rfs.data = (unsigned long)adapter;
+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
+}
+
+/* edma_free_rfs_flow_table()
+ * Free EDMA RFS flow table
+ */
+static void edma_free_rfs_flow_table(struct edma_adapter *adapter)
+{
+ int i;
+
+ /* Remove sync timer */
+ del_timer_sync(&adapter->rfs.expire_rfs);
+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+
+ /* Free EDMA RFS table entries */
+ adapter->rfs.filter_available = 0;
+
+ /* Clean-up EDMA flow hash table */
+ for (i = 0; i < EDMA_RFS_FLOW_ENTRIES; i++) {
+ struct hlist_head *hhead;
+ struct hlist_node *tmp;
+ struct edma_rfs_filter_node *filter_node;
+ int res;
+
+ hhead = &adapter->rfs.hlist_head[i];
+ hlist_for_each_entry_safe(filter_node, tmp, hhead, node) {
+ res = edma_delete_rfs_filter(adapter, filter_node);
+ if (res < 0)
+ dev_warn(&adapter->netdev->dev,
+ "EDMA going down but RFS entry %d not allowed to be flushed by Switch",
+ filter_node->flow_id);
+ hlist_del(&filter_node->node);
+ kfree(filter_node);
+ }
+ }
+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+}
+
+/* edma_tx_unmap_and_free()
+ * clean TX buffer
+ */
+static inline void edma_tx_unmap_and_free(struct platform_device *pdev,
+ struct edma_sw_desc *sw_desc)
+{
+ struct sk_buff *skb = sw_desc->skb;
+
+ if (likely((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD) ||
+ (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAGLIST)))
+ /* unmap_single for skb head area */
+ dma_unmap_single(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_TO_DEVICE);
+ else if (sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)
+ /* unmap page for paged fragments */
+ dma_unmap_page(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_TO_DEVICE);
+
+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_LAST))
+ dev_kfree_skb_any(skb);
+
+ sw_desc->flags = 0;
+}
+
+/* edma_tx_complete()
+ * Used to clean tx queues and update hardware and consumer index
+ */
+static void edma_tx_complete(struct edma_common_info *edma_cinfo, int queue_id)
+{
+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+ struct edma_sw_desc *sw_desc;
+ struct platform_device *pdev = edma_cinfo->pdev;
+ int i;
+
+ u16 sw_next_to_clean = etdr->sw_next_to_clean;
+ u16 hw_next_to_clean;
+ u32 data = 0;
+
+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &data);
+ hw_next_to_clean = (data >> EDMA_TPD_CONS_IDX_SHIFT) & EDMA_TPD_CONS_IDX_MASK;
+
+ /* clean the buffer here */
+ while (sw_next_to_clean != hw_next_to_clean) {
+ sw_desc = &etdr->sw_desc[sw_next_to_clean];
+ edma_tx_unmap_and_free(pdev, sw_desc);
+ sw_next_to_clean = (sw_next_to_clean + 1) & (etdr->count - 1);
+ }
+
+ etdr->sw_next_to_clean = sw_next_to_clean;
+
+ /* update the TPD consumer index register */
+ edma_write_reg(EDMA_REG_TX_SW_CONS_IDX_Q(queue_id), sw_next_to_clean);
+
+ /* Wake the queue if queue is stopped and netdev link is up */
+ for (i = 0; i < EDMA_MAX_NETDEV_PER_QUEUE && etdr->nq[i] ; i++) {
+ if (netif_tx_queue_stopped(etdr->nq[i])) {
+ if ((etdr->netdev[i]) && netif_carrier_ok(etdr->netdev[i]))
+ netif_tx_wake_queue(etdr->nq[i]);
+ }
+ }
+}
+
+/* edma_get_tx_buffer()
+ * Get sw_desc corresponding to the TPD
+ */
+static struct edma_sw_desc *edma_get_tx_buffer(struct edma_common_info *edma_cinfo,
+ struct edma_tx_desc *tpd, int queue_id)
+{
+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+ return &etdr->sw_desc[tpd - (struct edma_tx_desc *)etdr->hw_desc];
+}
+
+/* edma_get_next_tpd()
+ * Return a TPD descriptor for transfer
+ */
+static struct edma_tx_desc *edma_get_next_tpd(struct edma_common_info *edma_cinfo,
+ int queue_id)
+{
+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+ u16 sw_next_to_fill = etdr->sw_next_to_fill;
+ struct edma_tx_desc *tpd_desc =
+ (&((struct edma_tx_desc *)(etdr->hw_desc))[sw_next_to_fill]);
+
+ etdr->sw_next_to_fill = (etdr->sw_next_to_fill + 1) & (etdr->count - 1);
+
+ return tpd_desc;
+}
+
+/* edma_tpd_available()
+ * Check number of free TPDs
+ */
+static inline u16 edma_tpd_available(struct edma_common_info *edma_cinfo,
+ int queue_id)
+{
+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+
+ u16 sw_next_to_fill;
+ u16 sw_next_to_clean;
+ u16 count = 0;
+
+ sw_next_to_clean = etdr->sw_next_to_clean;
+ sw_next_to_fill = etdr->sw_next_to_fill;
+
+ if (likely(sw_next_to_clean <= sw_next_to_fill))
+ count = etdr->count;
+
+ return count + sw_next_to_clean - sw_next_to_fill - 1;
+}
+
+/* edma_tx_queue_get()
+ * Get the starting number of the queue
+ */
+static inline int edma_tx_queue_get(struct edma_adapter *adapter,
+ struct sk_buff *skb, int txq_id)
+{
+ /* skb->priority is used as an index to skb priority table
+ * and based on packet priority, correspong queue is assigned.
+ */
+ return adapter->tx_start_offset[txq_id] + edma_skb_priority_offset(skb);
+}
+
+/* edma_tx_update_hw_idx()
+ * update the producer index for the ring transmitted
+ */
+static void edma_tx_update_hw_idx(struct edma_common_info *edma_cinfo,
+ struct sk_buff *skb, int queue_id)
+{
+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[queue_id];
+ u32 tpd_idx_data;
+
+ /* Read and update the producer index */
+ edma_read_reg(EDMA_REG_TPD_IDX_Q(queue_id), &tpd_idx_data);
+ tpd_idx_data &= ~EDMA_TPD_PROD_IDX_BITS;
+ tpd_idx_data |= (etdr->sw_next_to_fill & EDMA_TPD_PROD_IDX_MASK)
+ << EDMA_TPD_PROD_IDX_SHIFT;
+
+ edma_write_reg(EDMA_REG_TPD_IDX_Q(queue_id), tpd_idx_data);
+}
+
+/* edma_rollback_tx()
+ * Function to retrieve tx resources in case of error
+ */
+static void edma_rollback_tx(struct edma_adapter *adapter,
+ struct edma_tx_desc *start_tpd, int queue_id)
+{
+ struct edma_tx_desc_ring *etdr = adapter->edma_cinfo->tpd_ring[queue_id];
+ struct edma_sw_desc *sw_desc;
+ struct edma_tx_desc *tpd = NULL;
+ u16 start_index, index;
+
+ start_index = start_tpd - (struct edma_tx_desc *)(etdr->hw_desc);
+
+ index = start_index;
+ while (index != etdr->sw_next_to_fill) {
+ tpd = (&((struct edma_tx_desc *)(etdr->hw_desc))[index]);
+ sw_desc = &etdr->sw_desc[index];
+ edma_tx_unmap_and_free(adapter->pdev, sw_desc);
+ memset(tpd, 0, sizeof(struct edma_tx_desc));
+ if (++index == etdr->count)
+ index = 0;
+ }
+ etdr->sw_next_to_fill = start_index;
+}
+
+/* edma_tx_map_and_fill()
+ * gets called from edma_xmit_frame
+ *
+ * This is where the dma of the buffer to be transmitted
+ * gets mapped
+ */
+static int edma_tx_map_and_fill(struct edma_common_info *edma_cinfo,
+ struct edma_adapter *adapter, struct sk_buff *skb, int queue_id,
+ unsigned int flags_transmit, u16 from_cpu, u16 dp_bitmap,
+ bool packet_is_rstp, int nr_frags)
+{
+ struct edma_sw_desc *sw_desc = NULL;
+ struct platform_device *pdev = edma_cinfo->pdev;
+ struct edma_tx_desc *tpd = NULL, *start_tpd = NULL;
+ struct sk_buff *iter_skb;
+ int i = 0;
+ u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0;
+ u16 buf_len, lso_desc_len = 0;
+
+ /* It should either be a nr_frags skb or fraglist skb but not both */
+ BUG_ON(nr_frags && skb_has_frag_list(skb));
+
+ if (skb_is_gso(skb)) {
+ /* TODO: What additional checks need to be performed here */
+ if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) {
+ lso_word1 |= EDMA_TPD_IPV4_EN;
+ ip_hdr(skb)->check = 0;
+ tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr,
+ ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+ } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) {
+ lso_word1 |= EDMA_TPD_LSO_V2_EN;
+ ipv6_hdr(skb)->payload_len = 0;
+ tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr,
+ &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0);
+ } else
+ return -EINVAL;
+
+ lso_word1 |= EDMA_TPD_LSO_EN | ((skb_shinfo(skb)->gso_size & EDMA_TPD_MSS_MASK) << EDMA_TPD_MSS_SHIFT) |
+ (skb_transport_offset(skb) << EDMA_TPD_HDR_SHIFT);
+ } else if (flags_transmit & EDMA_HW_CHECKSUM) {
+ u8 css, cso;
+ cso = skb_checksum_start_offset(skb);
+ css = cso + skb->csum_offset;
+
+ word1 |= (EDMA_TPD_CUSTOM_CSUM_EN);
+ word1 |= (cso >> 1) << EDMA_TPD_HDR_SHIFT;
+ word1 |= ((css >> 1) << EDMA_TPD_CUSTOM_CSUM_SHIFT);
+ }
+
+ if (skb->protocol == htons(ETH_P_PPP_SES))
+ word1 |= EDMA_TPD_PPPOE_EN;
+
+ if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_FLAG) {
+ switch(skb->vlan_proto) {
+ case htons(ETH_P_8021Q):
+ word3 |= (1 << EDMA_TX_INS_CVLAN);
+ word3 |= skb_vlan_tag_get(skb) << EDMA_TX_CVLAN_TAG_SHIFT;
+ break;
+ case htons(ETH_P_8021AD):
+ word1 |= (1 << EDMA_TX_INS_SVLAN);
+ svlan_tag = skb_vlan_tag_get(skb) << EDMA_TX_SVLAN_TAG_SHIFT;
+ break;
+ default:
+ dev_err(&pdev->dev, "no ctag or stag present\n");
+ goto vlan_tag_error;
+ }
+ } else if (flags_transmit & EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG) {
+ word3 |= (1 << EDMA_TX_INS_CVLAN);
+ word3 |= (adapter->default_vlan_tag) << EDMA_TX_CVLAN_TAG_SHIFT;
+ }
+
+ if (packet_is_rstp) {
+ word3 |= dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
+ word3 |= from_cpu << EDMA_TPD_FROM_CPU_SHIFT;
+ } else {
+ word3 |= adapter->dp_bitmap << EDMA_TPD_PORT_BITMAP_SHIFT;
+ }
+
+ buf_len = skb_headlen(skb);
+
+ if (lso_word1) {
+ if (lso_word1 & EDMA_TPD_LSO_V2_EN) {
+
+ /* IPv6 LSOv2 descriptor */
+ start_tpd = tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_NONE;
+
+ /* LSOv2 descriptor overrides addr field to pass length */
+ tpd->addr = cpu_to_le16(skb->len);
+ tpd->svlan_tag = svlan_tag;
+ tpd->word1 = word1 | lso_word1;
+ tpd->word3 = word3;
+ }
+
+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+ if (!start_tpd)
+ start_tpd = tpd;
+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+
+ /* The last buffer info contain the skb address,
+ * so skb will be freed after unmap
+ */
+ sw_desc->length = lso_desc_len;
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
+
+ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
+ skb->data, buf_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, sw_desc->dma))
+ goto dma_error;
+
+ tpd->addr = cpu_to_le32(sw_desc->dma);
+ tpd->len = cpu_to_le16(buf_len);
+
+ tpd->svlan_tag = svlan_tag;
+ tpd->word1 = word1 | lso_word1;
+ tpd->word3 = word3;
+
+ /* The last buffer info contain the skb address,
+ * so it will be freed after unmap
+ */
+ sw_desc->length = lso_desc_len;
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
+
+ buf_len = 0;
+ }
+
+ if (likely(buf_len)) {
+
+ /* TODO Do not dequeue descriptor if there is a potential error */
+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+
+ if (!start_tpd)
+ start_tpd = tpd;
+
+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+
+ /* The last buffer info contain the skb address,
+ * so it will be free after unmap
+ */
+ sw_desc->length = buf_len;
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_HEAD;
+ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
+ skb->data, buf_len, DMA_TO_DEVICE);
+ if (dma_mapping_error(&pdev->dev, sw_desc->dma))
+ goto dma_error;
+
+ tpd->addr = cpu_to_le32(sw_desc->dma);
+ tpd->len = cpu_to_le16(buf_len);
+
+ tpd->svlan_tag = svlan_tag;
+ tpd->word1 = word1 | lso_word1;
+ tpd->word3 = word3;
+ }
+
+ /* Walk through all paged fragments */
+ while (nr_frags--) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ buf_len = skb_frag_size(frag);
+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+ sw_desc->length = buf_len;
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAG;
+
+ sw_desc->dma = skb_frag_dma_map(&pdev->dev, frag, 0, buf_len, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(NULL, sw_desc->dma))
+ goto dma_error;
+
+ tpd->addr = cpu_to_le32(sw_desc->dma);
+ tpd->len = cpu_to_le16(buf_len);
+
+ tpd->svlan_tag = svlan_tag;
+ tpd->word1 = word1 | lso_word1;
+ tpd->word3 = word3;
+ i++;
+ }
+
+ /* Walk through all fraglist skbs */
+ skb_walk_frags(skb, iter_skb) {
+ buf_len = iter_skb->len;
+ tpd = edma_get_next_tpd(edma_cinfo, queue_id);
+ sw_desc = edma_get_tx_buffer(edma_cinfo, tpd, queue_id);
+ sw_desc->length = buf_len;
+ sw_desc->dma = dma_map_single(&adapter->pdev->dev,
+ iter_skb->data, buf_len, DMA_TO_DEVICE);
+
+ if (dma_mapping_error(NULL, sw_desc->dma))
+ goto dma_error;
+
+ tpd->addr = cpu_to_le32(sw_desc->dma);
+ tpd->len = cpu_to_le16(buf_len);
+ tpd->svlan_tag = svlan_tag;
+ tpd->word1 = word1 | lso_word1;
+ tpd->word3 = word3;
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_SKB_FRAGLIST;
+ }
+
+ if (tpd)
+ tpd->word1 |= 1 << EDMA_TPD_EOP_SHIFT;
+
+ sw_desc->skb = skb;
+ sw_desc->flags |= EDMA_SW_DESC_FLAG_LAST;
+
+ return 0;
+
+dma_error:
+ edma_rollback_tx(adapter, start_tpd, queue_id);
+ dev_err(&pdev->dev, "TX DMA map failed\n");
+vlan_tag_error:
+ return -ENOMEM;
+}
+
+/* edma_check_link()
+ * check Link status
+ */
+static int edma_check_link(struct edma_adapter *adapter)
+{
+ struct phy_device *phydev = adapter->phydev;
+
+ if (!(adapter->poll_required))
+ return __EDMA_LINKUP;
+
+ if (phydev->link)
+ return __EDMA_LINKUP;
+
+ return __EDMA_LINKDOWN;
+}
+
+/* edma_adjust_link()
+ * check for edma link status
+ */
+void edma_adjust_link(struct net_device *netdev)
+{
+ int status;
+ struct edma_adapter *adapter = netdev_priv(netdev);
+ struct phy_device *phydev = adapter->phydev;
+
+ if (!test_bit(__EDMA_UP, &adapter->state_flags))
+ return;
+
+ status = edma_check_link(adapter);
+
+ if (status == __EDMA_LINKUP && adapter->link_state == __EDMA_LINKDOWN) {
+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is up with phy_speed=%d\n", netdev->name, phydev->speed);
+ adapter->link_state = __EDMA_LINKUP;
+ netif_carrier_on(netdev);
+ if (netif_running(netdev))
+ netif_tx_wake_all_queues(netdev);
+ } else if (status == __EDMA_LINKDOWN && adapter->link_state == __EDMA_LINKUP) {
+ dev_info(&adapter->pdev->dev, "%s: GMAC Link is down\n", netdev->name);
+ adapter->link_state = __EDMA_LINKDOWN;
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+ }
+}
+
+/* edma_get_stats()
+ * Statistics api used to retreive the tx/rx statistics
+ */
+struct net_device_stats *edma_get_stats(struct net_device *netdev)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+
+ return &adapter->stats;
+}
+
+/* edma_xmit()
+ * Main api to be called by the core for packet transmission
+ */
+netdev_tx_t edma_xmit(struct sk_buff *skb,
+ struct net_device *net_dev)
+{
+ struct edma_adapter *adapter = netdev_priv(net_dev);
+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+ struct edma_tx_desc_ring *etdr;
+ u16 from_cpu, dp_bitmap, txq_id;
+ int ret, nr_frags = 0, num_tpds_needed = 1, queue_id;
+ unsigned int flags_transmit = 0;
+ bool packet_is_rstp = false;
+ struct netdev_queue *nq = NULL;
+
+ if (skb_shinfo(skb)->nr_frags) {
+ nr_frags = skb_shinfo(skb)->nr_frags;
+ num_tpds_needed += nr_frags;
+ } else if (skb_has_frag_list(skb)) {
+ struct sk_buff *iter_skb;
+
+ skb_walk_frags(skb, iter_skb)
+ num_tpds_needed++;
+ }
+
+ if (num_tpds_needed > EDMA_MAX_SKB_FRAGS) {
+ dev_err(&net_dev->dev,
+ "skb received with fragments %d which is more than %lu",
+ num_tpds_needed, EDMA_MAX_SKB_FRAGS);
+ dev_kfree_skb_any(skb);
+ adapter->stats.tx_errors++;
+ return NETDEV_TX_OK;
+ }
+
+ if (edma_stp_rstp) {
+ u16 ath_hdr, ath_eth_type;
+ u8 mac_addr[EDMA_ETH_HDR_LEN];
+ ath_eth_type = ntohs(*(uint16_t *)&skb->data[12]);
+ if (ath_eth_type == edma_ath_eth_type) {
+ packet_is_rstp = true;
+ ath_hdr = htons(*(uint16_t *)&skb->data[14]);
+ dp_bitmap = ath_hdr & EDMA_TX_ATH_HDR_PORT_BITMAP_MASK;
+ from_cpu = (ath_hdr & EDMA_TX_ATH_HDR_FROM_CPU_MASK) >> EDMA_TX_ATH_HDR_FROM_CPU_SHIFT;
+ memcpy(mac_addr, skb->data, EDMA_ETH_HDR_LEN);
+
+ skb_pull(skb, 4);
+
+ memcpy(skb->data, mac_addr, EDMA_ETH_HDR_LEN);
+ }
+ }
+
+ /* this will be one of the 4 TX queues exposed to linux kernel */
+ txq_id = skb_get_queue_mapping(skb);
+ queue_id = edma_tx_queue_get(adapter, skb, txq_id);
+ etdr = edma_cinfo->tpd_ring[queue_id];
+ nq = netdev_get_tx_queue(net_dev, txq_id);
+
+ local_bh_disable();
+ /* Tx is not handled in bottom half context. Hence, we need to protect
+ * Tx from tasks and bottom half
+ */
+
+ if (num_tpds_needed > edma_tpd_available(edma_cinfo, queue_id)) {
+ /* not enough descriptor, just stop queue */
+ netif_tx_stop_queue(nq);
+ local_bh_enable();
+ dev_dbg(&net_dev->dev, "Not enough descriptors available");
+ edma_cinfo->edma_ethstats.tx_desc_error++;
+ return NETDEV_TX_BUSY;
+ }
+
+ /* Check and mark VLAN tag offload */
+ if (skb_vlan_tag_present(skb))
+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_FLAG;
+ else if (adapter->default_vlan_tag)
+ flags_transmit |= EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG;
+
+ /* Check and mark checksum offload */
+ if (likely(skb->ip_summed == CHECKSUM_PARTIAL))
+ flags_transmit |= EDMA_HW_CHECKSUM;
+
+ /* Map and fill descriptor for Tx */
+ ret = edma_tx_map_and_fill(edma_cinfo, adapter, skb, queue_id,
+ flags_transmit, from_cpu, dp_bitmap, packet_is_rstp, nr_frags);
+ if (ret) {
+ dev_kfree_skb_any(skb);
+ adapter->stats.tx_errors++;
+ goto netdev_okay;
+ }
+
+ /* Update SW producer index */
+ edma_tx_update_hw_idx(edma_cinfo, skb, queue_id);
+
+ /* update tx statistics */
+ adapter->stats.tx_packets++;
+ adapter->stats.tx_bytes += skb->len;
+
+netdev_okay:
+ local_bh_enable();
+ return NETDEV_TX_OK;
+}
+
+/*
+ * edma_flow_may_expire()
+ * Timer function called periodically to delete the node
+ */
+void edma_flow_may_expire(unsigned long data)
+{
+ struct edma_adapter *adapter = (struct edma_adapter *)data;
+ int j;
+
+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+ for (j = 0; j < EDMA_RFS_EXPIRE_COUNT_PER_CALL; j++) {
+ struct hlist_head *hhead;
+ struct hlist_node *tmp;
+ struct edma_rfs_filter_node *n;
+ bool res;
+
+ hhead = &adapter->rfs.hlist_head[adapter->rfs.hashtoclean++];
+ hlist_for_each_entry_safe(n, tmp, hhead, node) {
+ res = rps_may_expire_flow(adapter->netdev, n->rq_id,
+ n->flow_id, n->filter_id);
+ if (res) {
+ int ret;
+ ret = edma_delete_rfs_filter(adapter, n);
+ if (ret < 0)
+ dev_dbg(&adapter->netdev->dev,
+ "RFS entry %d not allowed to be flushed by Switch",
+ n->flow_id);
+ else {
+ hlist_del(&n->node);
+ kfree(n);
+ adapter->rfs.filter_available++;
+ }
+ }
+ }
+ }
+
+ adapter->rfs.hashtoclean = adapter->rfs.hashtoclean & (EDMA_RFS_FLOW_ENTRIES - 1);
+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+ mod_timer(&adapter->rfs.expire_rfs, jiffies + HZ / 4);
+}
+
+/* edma_rx_flow_steer()
+ * Called by core to to steer the flow to CPU
+ */
+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
+ u16 rxq, u32 flow_id)
+{
+ struct flow_keys keys;
+ struct edma_rfs_filter_node *filter_node;
+ struct edma_adapter *adapter = netdev_priv(dev);
+ u16 hash_tblid;
+ int res;
+
+ if (skb->protocol == htons(ETH_P_IPV6)) {
+ dev_err(&adapter->pdev->dev, "IPv6 not supported\n");
+ res = -EINVAL;
+ goto no_protocol_err;
+ }
+
+ /* Dissect flow parameters
+ * We only support IPv4 + TCP/UDP
+ */
+ res = skb_flow_dissect_flow_keys(skb, &keys, 0);
+ if (!((keys.basic.ip_proto == IPPROTO_TCP) || (keys.basic.ip_proto == IPPROTO_UDP))) {
+ res = -EPROTONOSUPPORT;
+ goto no_protocol_err;
+ }
+
+ /* Check if table entry exists */
+ hash_tblid = skb_get_hash_raw(skb) & EDMA_RFS_FLOW_ENTRIES_MASK;
+
+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+ filter_node = edma_rfs_key_search(&adapter->rfs.hlist_head[hash_tblid], &keys);
+
+ if (filter_node) {
+ if (rxq == filter_node->rq_id) {
+ res = -EEXIST;
+ goto out;
+ } else {
+ res = edma_delete_rfs_filter(adapter, filter_node);
+ if (res < 0)
+ dev_warn(&adapter->netdev->dev,
+ "Cannot steer flow %d to different queue",
+ filter_node->flow_id);
+ else {
+ adapter->rfs.filter_available++;
+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
+ if (res < 0) {
+ dev_warn(&adapter->netdev->dev,
+ "Cannot steer flow %d to different queue",
+ filter_node->flow_id);
+ } else {
+ adapter->rfs.filter_available--;
+ filter_node->rq_id = rxq;
+ filter_node->filter_id = res;
+ }
+ }
+ }
+ } else {
+ if (adapter->rfs.filter_available == 0) {
+ res = -EBUSY;
+ goto out;
+ }
+
+ filter_node = kmalloc(sizeof(*filter_node), GFP_ATOMIC);
+ if (!filter_node) {
+ res = -ENOMEM;
+ goto out;
+ }
+
+ res = edma_add_rfs_filter(adapter, &keys, rxq, filter_node);
+ if (res < 0) {
+ kfree(filter_node);
+ goto out;
+ }
+
+ adapter->rfs.filter_available--;
+ filter_node->rq_id = rxq;
+ filter_node->filter_id = res;
+ filter_node->flow_id = flow_id;
+ filter_node->keys = keys;
+ INIT_HLIST_NODE(&filter_node->node);
+ hlist_add_head(&filter_node->node, &adapter->rfs.hlist_head[hash_tblid]);
+ }
+
+out:
+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+no_protocol_err:
+ return res;
+}
+
+/* edma_register_rfs_filter()
+ * Add RFS filter callback
+ */
+int edma_register_rfs_filter(struct net_device *netdev,
+ set_rfs_filter_callback_t set_filter)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+
+ spin_lock_bh(&adapter->rfs.rfs_ftab_lock);
+
+ if (adapter->set_rfs_rule) {
+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+ return -1;
+ }
+
+ adapter->set_rfs_rule = set_filter;
+ spin_unlock_bh(&adapter->rfs.rfs_ftab_lock);
+
+ return 0;
+}
+
+/* edma_alloc_tx_rings()
+ * Allocate rx rings
+ */
+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+ int i, err = 0;
+
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+ err = edma_alloc_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
+ if (err) {
+ dev_err(&pdev->dev, "Tx Queue alloc %u failed\n", i);
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+/* edma_free_tx_rings()
+ * Free tx rings
+ */
+void edma_free_tx_rings(struct edma_common_info *edma_cinfo)
+{
+ int i;
+
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
+ edma_free_tx_ring(edma_cinfo, edma_cinfo->tpd_ring[i]);
+}
+
+/* edma_free_tx_resources()
+ * Free buffers associated with tx rings
+ */
+void edma_free_tx_resources(struct edma_common_info *edma_cinfo)
+{
+ struct edma_tx_desc_ring *etdr;
+ struct edma_sw_desc *sw_desc;
+ struct platform_device *pdev = edma_cinfo->pdev;
+ int i, j;
+
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+ etdr = edma_cinfo->tpd_ring[i];
+ for (j = 0; j < EDMA_TX_RING_SIZE; j++) {
+ sw_desc = &etdr->sw_desc[j];
+ if (sw_desc->flags & (EDMA_SW_DESC_FLAG_SKB_HEAD |
+ EDMA_SW_DESC_FLAG_SKB_FRAG | EDMA_SW_DESC_FLAG_SKB_FRAGLIST))
+ edma_tx_unmap_and_free(pdev, sw_desc);
+ }
+ }
+}
+
+/* edma_alloc_rx_rings()
+ * Allocate rx rings
+ */
+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo)
+{
+ struct platform_device *pdev = edma_cinfo->pdev;
+ int i, j, err = 0;
+
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ err = edma_alloc_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
+ if (err) {
+ dev_err(&pdev->dev, "Rx Queue alloc%u failed\n", i);
+ return err;
+ }
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+
+ return 0;
+}
+
+/* edma_free_rx_rings()
+ * free rx rings
+ */
+void edma_free_rx_rings(struct edma_common_info *edma_cinfo)
+{
+ int i, j;
+
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ edma_free_rx_ring(edma_cinfo, edma_cinfo->rfd_ring[j]);
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+}
+
+/* edma_free_queues()
+ * Free the queues allocaated
+ */
+void edma_free_queues(struct edma_common_info *edma_cinfo)
+{
+ int i , j;
+
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+ if (edma_cinfo->tpd_ring[i])
+ kfree(edma_cinfo->tpd_ring[i]);
+ edma_cinfo->tpd_ring[i] = NULL;
+ }
+
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ if (edma_cinfo->rfd_ring[j])
+ kfree(edma_cinfo->rfd_ring[j]);
+ edma_cinfo->rfd_ring[j] = NULL;
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+
+ edma_cinfo->num_rx_queues = 0;
+ edma_cinfo->num_tx_queues = 0;
+
+ return;
+}
+
+/* edma_free_rx_resources()
+ * Free buffers associated with tx rings
+ */
+void edma_free_rx_resources(struct edma_common_info *edma_cinfo)
+{
+ struct edma_rfd_desc_ring *erdr;
+ struct edma_sw_desc *sw_desc;
+ struct platform_device *pdev = edma_cinfo->pdev;
+ int i, j, k;
+
+ for (i = 0, k = 0; i < edma_cinfo->num_rx_queues; i++) {
+ erdr = edma_cinfo->rfd_ring[k];
+ for (j = 0; j < EDMA_RX_RING_SIZE; j++) {
+ sw_desc = &erdr->sw_desc[j];
+ if (likely(sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_HEAD)) {
+ dma_unmap_single(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_FROM_DEVICE);
+ edma_clean_rfd(erdr, j);
+ } else if ((sw_desc->flags & EDMA_SW_DESC_FLAG_SKB_FRAG)) {
+ dma_unmap_page(&pdev->dev, sw_desc->dma,
+ sw_desc->length, DMA_FROM_DEVICE);
+ edma_clean_rfd(erdr, j);
+ }
+ }
+ k += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+
+ }
+}
+
+/* edma_alloc_queues_tx()
+ * Allocate memory for all rings
+ */
+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo)
+{
+ int i;
+
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+ struct edma_tx_desc_ring *etdr;
+ etdr = kzalloc(sizeof(struct edma_tx_desc_ring), GFP_KERNEL);
+ if (!etdr)
+ goto err;
+ etdr->count = edma_cinfo->tx_ring_count;
+ edma_cinfo->tpd_ring[i] = etdr;
+ }
+
+ return 0;
+err:
+ edma_free_queues(edma_cinfo);
+ return -1;
+}
+
+/* edma_alloc_queues_rx()
+ * Allocate memory for all rings
+ */
+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo)
+{
+ int i, j;
+
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ struct edma_rfd_desc_ring *rfd_ring;
+ rfd_ring = kzalloc(sizeof(struct edma_rfd_desc_ring),
+ GFP_KERNEL);
+ if (!rfd_ring)
+ goto err;
+ rfd_ring->count = edma_cinfo->rx_ring_count;
+ edma_cinfo->rfd_ring[j] = rfd_ring;
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+ return 0;
+err:
+ edma_free_queues(edma_cinfo);
+ return -1;
+}
+
+/* edma_clear_irq_status()
+ * Clear interrupt status
+ */
+void edma_clear_irq_status()
+{
+ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
+ edma_write_reg(EDMA_REG_MISC_ISR, 0x1fff);
+ edma_write_reg(EDMA_REG_WOL_ISR, 0x1);
+};
+
+/* edma_configure()
+ * Configure skb, edma interrupts and control register.
+ */
+int edma_configure(struct edma_common_info *edma_cinfo)
+{
+ struct edma_hw *hw = &edma_cinfo->hw;
+ u32 intr_modrt_data;
+ u32 intr_ctrl_data = 0;
+ int i, j, ret_count;
+
+ edma_read_reg(EDMA_REG_INTR_CTRL, &intr_ctrl_data);
+ intr_ctrl_data &= ~(1 << EDMA_INTR_SW_IDX_W_TYP_SHIFT);
+ intr_ctrl_data |= hw->intr_sw_idx_w << EDMA_INTR_SW_IDX_W_TYP_SHIFT;
+ edma_write_reg(EDMA_REG_INTR_CTRL, intr_ctrl_data);
+
+ edma_clear_irq_status();
+
+ /* Clear any WOL status */
+ edma_write_reg(EDMA_REG_WOL_CTRL, 0);
+ intr_modrt_data = (EDMA_TX_IMT << EDMA_IRQ_MODRT_TX_TIMER_SHIFT);
+ intr_modrt_data |= (EDMA_RX_IMT << EDMA_IRQ_MODRT_RX_TIMER_SHIFT);
+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, intr_modrt_data);
+ edma_configure_tx(edma_cinfo);
+ edma_configure_rx(edma_cinfo);
+
+ /* Allocate the RX buffer */
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ struct edma_rfd_desc_ring *ring = edma_cinfo->rfd_ring[j];
+ ret_count = edma_alloc_rx_buf(edma_cinfo, ring, ring->count, j);
+ if (ret_count) {
+ dev_dbg(&edma_cinfo->pdev->dev, "not all rx buffers allocated\n");
+ }
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+
+ /* Configure descriptor Ring */
+ edma_init_desc(edma_cinfo);
+ return 0;
+}
+
+/* edma_irq_enable()
+ * Enable default interrupt generation settings
+ */
+void edma_irq_enable(struct edma_common_info *edma_cinfo)
+{
+ struct edma_hw *hw = &edma_cinfo->hw;
+ int i, j;
+
+ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
+ for (i = 0, j = 0; i < edma_cinfo->num_rx_queues; i++) {
+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(j), hw->rx_intr_mask);
+ j += ((edma_cinfo->num_rx_queues == 4) ? 2 : 1);
+ }
+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), hw->tx_intr_mask);
+}
+
+/* edma_irq_disable()
+ * Disable Interrupt
+ */
+void edma_irq_disable(struct edma_common_info *edma_cinfo)
+{
+ int i;
+
+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++)
+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(i), 0x0);
+
+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++)
+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(i), 0x0);
+ edma_write_reg(EDMA_REG_MISC_IMR, 0);
+ edma_write_reg(EDMA_REG_WOL_IMR, 0);
+}
+
+/* edma_free_irqs()
+ * Free All IRQs
+ */
+void edma_free_irqs(struct edma_adapter *adapter)
+{
+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+ int i, j;
+ int k = ((edma_cinfo->num_rx_queues == 4) ? 1 : 2);
+
+ for (i = 0; i < CONFIG_NR_CPUS; i++) {
+ for (j = edma_cinfo->edma_percpu_info[i].tx_start; j < (edma_cinfo->edma_percpu_info[i].tx_start + 4); j++)
+ free_irq(edma_cinfo->tx_irq[j], &edma_cinfo->edma_percpu_info[i]);
+
+ for (j = edma_cinfo->edma_percpu_info[i].rx_start; j < (edma_cinfo->edma_percpu_info[i].rx_start + k); j++)
+ free_irq(edma_cinfo->rx_irq[j], &edma_cinfo->edma_percpu_info[i]);
+ }
+}
+
+/* edma_enable_rx_ctrl()
+ * Enable RX queue control
+ */
+void edma_enable_rx_ctrl(struct edma_hw *hw)
+{
+ u32 data;
+
+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
+ data |= EDMA_RXQ_CTRL_EN;
+ edma_write_reg(EDMA_REG_RXQ_CTRL, data);
+}
+
+
+/* edma_enable_tx_ctrl()
+ * Enable TX queue control
+ */
+void edma_enable_tx_ctrl(struct edma_hw *hw)
+{
+ u32 data;
+
+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
+ data |= EDMA_TXQ_CTRL_TXQ_EN;
+ edma_write_reg(EDMA_REG_TXQ_CTRL, data);
+}
+
+/* edma_stop_rx_tx()
+ * Disable RX/TQ Queue control
+ */
+void edma_stop_rx_tx(struct edma_hw *hw)
+{
+ u32 data;
+
+ edma_read_reg(EDMA_REG_RXQ_CTRL, &data);
+ data &= ~EDMA_RXQ_CTRL_EN;
+ edma_write_reg(EDMA_REG_RXQ_CTRL, data);
+ edma_read_reg(EDMA_REG_TXQ_CTRL, &data);
+ data &= ~EDMA_TXQ_CTRL_TXQ_EN;
+ edma_write_reg(EDMA_REG_TXQ_CTRL, data);
+}
+
+/* edma_reset()
+ * Reset the EDMA
+ */
+int edma_reset(struct edma_common_info *edma_cinfo)
+{
+ struct edma_hw *hw = &edma_cinfo->hw;
+
+ edma_irq_disable(edma_cinfo);
+
+ edma_clear_irq_status();
+
+ edma_stop_rx_tx(hw);
+
+ return 0;
+}
+
+/* edma_fill_netdev()
+ * Fill netdev for each etdr
+ */
+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int queue_id,
+ int dev, int txq_id)
+{
+ struct edma_tx_desc_ring *etdr;
+ int i = 0;
+
+ etdr = edma_cinfo->tpd_ring[queue_id];
+
+ while (etdr->netdev[i])
+ i++;
+
+ if (i >= EDMA_MAX_NETDEV_PER_QUEUE)
+ return -1;
+
+ /* Populate the netdev associated with the tpd ring */
+ etdr->netdev[i] = edma_netdev[dev];
+ etdr->nq[i] = netdev_get_tx_queue(edma_netdev[dev], txq_id);
+
+ return 0;
+}
+
+/* edma_change_mtu()
+ * change the MTU of the NIC.
+ */
+int edma_change_mtu(struct net_device *netdev, int new_mtu)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+ int old_mtu = netdev->mtu;
+ int max_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN + (2 * VLAN_HLEN);
+
+ if ((max_frame_size < ETH_ZLEN + ETH_FCS_LEN) ||
+ (max_frame_size > EDMA_MAX_JUMBO_FRAME_SIZE)) {
+ dev_err(&edma_cinfo->pdev->dev, "MTU setting not correct\n");
+ return -EINVAL;
+ }
+
+ /* set MTU */
+ if (old_mtu != new_mtu) {
+ netdev->mtu = new_mtu;
+ netdev_update_features(netdev);
+ }
+
+ return 0;
+}
+
+/* edma_set_mac()
+ * Change the Ethernet Address of the NIC
+ */
+int edma_set_mac_addr(struct net_device *netdev, void *p)
+{
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ if (netif_running(netdev))
+ return -EBUSY;
+
+ memcpy(netdev->dev_addr, addr->sa_data, netdev->addr_len);
+ return 0;
+}
+
+/* edma_set_stp_rstp()
+ * set stp/rstp
+ */
+void edma_set_stp_rstp(bool rstp)
+{
+ edma_stp_rstp = rstp;
+}
+
+/* edma_assign_ath_hdr_type()
+ * assign atheros header eth type
+ */
+void edma_assign_ath_hdr_type(int eth_type)
+{
+ edma_ath_eth_type = eth_type & EDMA_ETH_TYPE_MASK;
+}
+
+/* edma_get_default_vlan_tag()
+ * Used by other modules to get the default vlan tag
+ */
+int edma_get_default_vlan_tag(struct net_device *netdev)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->default_vlan_tag)
+ return adapter->default_vlan_tag;
+
+ return 0;
+}
+
+/* edma_open()
+ * gets called when netdevice is up, start the queue.
+ */
+int edma_open(struct net_device *netdev)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+ struct platform_device *pdev = adapter->edma_cinfo->pdev;
+
+ netif_tx_start_all_queues(netdev);
+ edma_initialise_rfs_flow_table(adapter);
+ set_bit(__EDMA_UP, &adapter->state_flags);
+
+ /* if Link polling is enabled, in our case enabled for WAN, then
+ * do a phy start, else always set link as UP
+ */
+ if (adapter->poll_required) {
+ if (!IS_ERR(adapter->phydev)) {
+ phy_start(adapter->phydev);
+ phy_start_aneg(adapter->phydev);
+ adapter->link_state = __EDMA_LINKDOWN;
+ } else {
+ dev_dbg(&pdev->dev, "Invalid PHY device for a link polled interface\n");
+ }
+ } else {
+ adapter->link_state = __EDMA_LINKUP;
+ netif_carrier_on(netdev);
+ }
+
+ return 0;
+}
+
+
+/* edma_close()
+ * gets called when netdevice is down, stops the queue.
+ */
+int edma_close(struct net_device *netdev)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+
+ edma_free_rfs_flow_table(adapter);
+ netif_carrier_off(netdev);
+ netif_tx_stop_all_queues(netdev);
+
+ if (adapter->poll_required) {
+ if (!IS_ERR(adapter->phydev))
+ phy_stop(adapter->phydev);
+ }
+
+ adapter->link_state = __EDMA_LINKDOWN;
+
+ /* Set GMAC state to UP before link state is checked
+ */
+ clear_bit(__EDMA_UP, &adapter->state_flags);
+
+ return 0;
+}
+
+/* edma_poll
+ * polling function that gets called when the napi gets scheduled.
+ *
+ * Main sequence of task performed in this api
+ * is clear irq status -> clear_tx_irq -> clean_rx_irq->
+ * enable interrupts.
+ */
+int edma_poll(struct napi_struct *napi, int budget)
+{
+ struct edma_per_cpu_queues_info *edma_percpu_info = container_of(napi,
+ struct edma_per_cpu_queues_info, napi);
+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
+ u32 reg_data;
+ u32 shadow_rx_status, shadow_tx_status;
+ int queue_id;
+ int i, work_done = 0;
+
+ /* Store the Rx/Tx status by ANDing it with
+ * appropriate CPU RX?TX mask
+ */
+ edma_read_reg(EDMA_REG_RX_ISR, &reg_data);
+ edma_percpu_info->rx_status |= reg_data & edma_percpu_info->rx_mask;
+ shadow_rx_status = edma_percpu_info->rx_status;
+ edma_read_reg(EDMA_REG_TX_ISR, &reg_data);
+ edma_percpu_info->tx_status |= reg_data & edma_percpu_info->tx_mask;
+ shadow_tx_status = edma_percpu_info->tx_status;
+
+ /* Every core will have a start, which will be computed
+ * in probe and stored in edma_percpu_info->tx_start variable.
+ * We will shift the status bit by tx_start to obtain
+ * status bits for the core on which the current processing
+ * is happening. Since, there are 4 tx queues per core,
+ * we will run the loop till we get the correct queue to clear.
+ */
+ while (edma_percpu_info->tx_status) {
+ queue_id = ffs(edma_percpu_info->tx_status) - 1;
+ edma_tx_complete(edma_cinfo, queue_id);
+ edma_percpu_info->tx_status &= ~(1 << queue_id);
+ }
+
+ /* Every core will have a start, which will be computed
+ * in probe and stored in edma_percpu_info->tx_start variable.
+ * We will shift the status bit by tx_start to obtain
+ * status bits for the core on which the current processing
+ * is happening. Since, there are 4 tx queues per core, we
+ * will run the loop till we get the correct queue to clear.
+ */
+ while (edma_percpu_info->rx_status) {
+ queue_id = ffs(edma_percpu_info->rx_status) - 1;
+ edma_rx_complete(edma_cinfo, &work_done,
+ budget, queue_id, napi);
+
+ if (likely(work_done < budget))
+ edma_percpu_info->rx_status &= ~(1 << queue_id);
+ else
+ break;
+ }
+
+ /* Clear the status register, to avoid the interrupts to
+ * reoccur.This clearing of interrupt status register is
+ * done here as writing to status register only takes place
+ * once the producer/consumer index has been updated to
+ * reflect that the packet transmission/reception went fine.
+ */
+ edma_write_reg(EDMA_REG_RX_ISR, shadow_rx_status);
+ edma_write_reg(EDMA_REG_TX_ISR, shadow_tx_status);
+
+ /* If budget not fully consumed, exit the polling mode */
+ if (likely(work_done < budget)) {
+ napi_complete(napi);
+
+ /* re-enable the interrupts */
+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x1);
+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x1);
+ }
+
+ return work_done;
+}
+
+/* edma interrupt()
+ * interrupt handler
+ */
+irqreturn_t edma_interrupt(int irq, void *dev)
+{
+ struct edma_per_cpu_queues_info *edma_percpu_info = (struct edma_per_cpu_queues_info *) dev;
+ struct edma_common_info *edma_cinfo = edma_percpu_info->edma_cinfo;
+ int i;
+
+ /* Unmask the TX/RX interrupt register */
+ for (i = 0; i < edma_cinfo->num_rxq_per_core; i++)
+ edma_write_reg(EDMA_REG_RX_INT_MASK_Q(edma_percpu_info->rx_start + i), 0x0);
+
+ for (i = 0; i < edma_cinfo->num_txq_per_core; i++)
+ edma_write_reg(EDMA_REG_TX_INT_MASK_Q(edma_percpu_info->tx_start + i), 0x0);
+
+ napi_schedule(&edma_percpu_info->napi);
+
+ return IRQ_HANDLED;
+}
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma.h
@@ -0,0 +1,447 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _EDMA_H_
+#define _EDMA_H_
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/io.h>
+#include <linux/vmalloc.h>
+#include <linux/pagemap.h>
+#include <linux/smp.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/sysctl.h>
+#include <linux/phy.h>
+#include <linux/of_net.h>
+#include <net/checksum.h>
+#include <net/ip6_checksum.h>
+#include <asm-generic/bug.h>
+#include "ess_edma.h"
+
+#define EDMA_CPU_CORES_SUPPORTED 4
+#define EDMA_MAX_PORTID_SUPPORTED 5
+#define EDMA_MAX_VLAN_SUPPORTED EDMA_MAX_PORTID_SUPPORTED
+#define EDMA_MAX_PORTID_BITMAP_INDEX (EDMA_MAX_PORTID_SUPPORTED + 1)
+#define EDMA_MAX_PORTID_BITMAP_SUPPORTED 0x1f /* 0001_1111 = 0x1f */
+#define EDMA_MAX_NETDEV_PER_QUEUE 4 /* 3 Netdev per queue, 1 space for indexing */
+
+#define EDMA_MAX_RECEIVE_QUEUE 8
+#define EDMA_MAX_TRANSMIT_QUEUE 16
+
+/* WAN/LAN adapter number */
+#define EDMA_WAN 0
+#define EDMA_LAN 1
+
+/* VLAN tag */
+#define EDMA_LAN_DEFAULT_VLAN 1
+#define EDMA_WAN_DEFAULT_VLAN 2
+
+#define EDMA_DEFAULT_GROUP1_VLAN 1
+#define EDMA_DEFAULT_GROUP2_VLAN 2
+#define EDMA_DEFAULT_GROUP3_VLAN 3
+#define EDMA_DEFAULT_GROUP4_VLAN 4
+#define EDMA_DEFAULT_GROUP5_VLAN 5
+
+/* Queues exposed to linux kernel */
+#define EDMA_NETDEV_TX_QUEUE 4
+#define EDMA_NETDEV_RX_QUEUE 4
+
+/* Number of queues per core */
+#define EDMA_NUM_TXQ_PER_CORE 4
+#define EDMA_NUM_RXQ_PER_CORE 2
+
+#define EDMA_TPD_EOP_SHIFT 31
+
+#define EDMA_PORT_ID_SHIFT 12
+#define EDMA_PORT_ID_MASK 0x7
+
+/* tpd word 3 bit 18-28 */
+#define EDMA_TPD_PORT_BITMAP_SHIFT 18
+
+#define EDMA_TPD_FROM_CPU_SHIFT 25
+
+#define EDMA_FROM_CPU_MASK 0x80
+#define EDMA_SKB_PRIORITY_MASK 0x38
+
+/* TX/RX descriptor ring count */
+/* should be a power of 2 */
+#define EDMA_RX_RING_SIZE 128
+#define EDMA_TX_RING_SIZE 128
+
+/* Flags used in paged/non paged mode */
+#define EDMA_RX_HEAD_BUFF_SIZE_JUMBO 256
+#define EDMA_RX_HEAD_BUFF_SIZE 1540
+
+/* MAX frame size supported by switch */
+#define EDMA_MAX_JUMBO_FRAME_SIZE 9216
+
+/* Configurations */
+#define EDMA_INTR_CLEAR_TYPE 0
+#define EDMA_INTR_SW_IDX_W_TYPE 0
+#define EDMA_FIFO_THRESH_TYPE 0
+#define EDMA_RSS_TYPE 0
+#define EDMA_RX_IMT 0x0020
+#define EDMA_TX_IMT 0x0050
+#define EDMA_TPD_BURST 5
+#define EDMA_TXF_BURST 0x100
+#define EDMA_RFD_BURST 8
+#define EDMA_RFD_THR 16
+#define EDMA_RFD_LTHR 0
+
+/* RX/TX per CPU based mask/shift */
+#define EDMA_TX_PER_CPU_MASK 0xF
+#define EDMA_RX_PER_CPU_MASK 0x3
+#define EDMA_TX_PER_CPU_MASK_SHIFT 0x2
+#define EDMA_RX_PER_CPU_MASK_SHIFT 0x1
+#define EDMA_TX_CPU_START_SHIFT 0x2
+#define EDMA_RX_CPU_START_SHIFT 0x1
+
+/* FLags used in transmit direction */
+#define EDMA_HW_CHECKSUM 0x00000001
+#define EDMA_VLAN_TX_TAG_INSERT_FLAG 0x00000002
+#define EDMA_VLAN_TX_TAG_INSERT_DEFAULT_FLAG 0x00000004
+
+#define EDMA_SW_DESC_FLAG_LAST 0x1
+#define EDMA_SW_DESC_FLAG_SKB_HEAD 0x2
+#define EDMA_SW_DESC_FLAG_SKB_FRAG 0x4
+#define EDMA_SW_DESC_FLAG_SKB_FRAGLIST 0x8
+#define EDMA_SW_DESC_FLAG_SKB_NONE 0x10
+#define EDMA_SW_DESC_FLAG_SKB_REUSE 0x20
+
+
+#define EDMA_MAX_SKB_FRAGS (MAX_SKB_FRAGS + 1)
+
+/* Ethtool specific list of EDMA supported features */
+#define EDMA_SUPPORTED_FEATURES (SUPPORTED_10baseT_Half \
+ | SUPPORTED_10baseT_Full \
+ | SUPPORTED_100baseT_Half \
+ | SUPPORTED_100baseT_Full \
+ | SUPPORTED_1000baseT_Full)
+
+/* Recevie side atheros Header */
+#define EDMA_RX_ATH_HDR_VERSION 0x2
+#define EDMA_RX_ATH_HDR_VERSION_SHIFT 14
+#define EDMA_RX_ATH_HDR_PRIORITY_SHIFT 11
+#define EDMA_RX_ATH_PORT_TYPE_SHIFT 6
+#define EDMA_RX_ATH_HDR_RSTP_PORT_TYPE 0x4
+
+/* Transmit side atheros Header */
+#define EDMA_TX_ATH_HDR_PORT_BITMAP_MASK 0x7F
+#define EDMA_TX_ATH_HDR_FROM_CPU_MASK 0x80
+#define EDMA_TX_ATH_HDR_FROM_CPU_SHIFT 7
+
+#define EDMA_TXQ_START_CORE0 8
+#define EDMA_TXQ_START_CORE1 12
+#define EDMA_TXQ_START_CORE2 0
+#define EDMA_TXQ_START_CORE3 4
+
+#define EDMA_TXQ_IRQ_MASK_CORE0 0x0F00
+#define EDMA_TXQ_IRQ_MASK_CORE1 0xF000
+#define EDMA_TXQ_IRQ_MASK_CORE2 0x000F
+#define EDMA_TXQ_IRQ_MASK_CORE3 0x00F0
+
+#define EDMA_ETH_HDR_LEN 12
+#define EDMA_ETH_TYPE_MASK 0xFFFF
+
+#define EDMA_RX_BUFFER_WRITE 16
+#define EDMA_RFD_AVAIL_THR 80
+
+#define EDMA_GMAC_NO_MDIO_PHY PHY_MAX_ADDR
+
+extern int ssdk_rfs_ipct_rule_set(__be32 ip_src, __be32 ip_dst,
+ __be16 sport, __be16 dport,
+ uint8_t proto, u16 loadbalance, bool action);
+struct edma_ethtool_statistics {
+ u32 tx_q0_pkt;
+ u32 tx_q1_pkt;
+ u32 tx_q2_pkt;
+ u32 tx_q3_pkt;
+ u32 tx_q4_pkt;
+ u32 tx_q5_pkt;
+ u32 tx_q6_pkt;
+ u32 tx_q7_pkt;
+ u32 tx_q8_pkt;
+ u32 tx_q9_pkt;
+ u32 tx_q10_pkt;
+ u32 tx_q11_pkt;
+ u32 tx_q12_pkt;
+ u32 tx_q13_pkt;
+ u32 tx_q14_pkt;
+ u32 tx_q15_pkt;
+ u32 tx_q0_byte;
+ u32 tx_q1_byte;
+ u32 tx_q2_byte;
+ u32 tx_q3_byte;
+ u32 tx_q4_byte;
+ u32 tx_q5_byte;
+ u32 tx_q6_byte;
+ u32 tx_q7_byte;
+ u32 tx_q8_byte;
+ u32 tx_q9_byte;
+ u32 tx_q10_byte;
+ u32 tx_q11_byte;
+ u32 tx_q12_byte;
+ u32 tx_q13_byte;
+ u32 tx_q14_byte;
+ u32 tx_q15_byte;
+ u32 rx_q0_pkt;
+ u32 rx_q1_pkt;
+ u32 rx_q2_pkt;
+ u32 rx_q3_pkt;
+ u32 rx_q4_pkt;
+ u32 rx_q5_pkt;
+ u32 rx_q6_pkt;
+ u32 rx_q7_pkt;
+ u32 rx_q0_byte;
+ u32 rx_q1_byte;
+ u32 rx_q2_byte;
+ u32 rx_q3_byte;
+ u32 rx_q4_byte;
+ u32 rx_q5_byte;
+ u32 rx_q6_byte;
+ u32 rx_q7_byte;
+ u32 tx_desc_error;
+};
+
+struct edma_mdio_data {
+ struct mii_bus *mii_bus;
+ void __iomem *membase;
+ int phy_irq[PHY_MAX_ADDR];
+};
+
+/* EDMA LINK state */
+enum edma_link_state {
+ __EDMA_LINKUP, /* Indicate link is UP */
+ __EDMA_LINKDOWN /* Indicate link is down */
+};
+
+/* EDMA GMAC state */
+enum edma_gmac_state {
+ __EDMA_UP /* use to indicate GMAC is up */
+};
+
+/* edma transmit descriptor */
+struct edma_tx_desc {
+ __le16 len; /* full packet including CRC */
+ __le16 svlan_tag; /* vlan tag */
+ __le32 word1; /* byte 4-7 */
+ __le32 addr; /* address of buffer */
+ __le32 word3; /* byte 12 */
+};
+
+/* edma receive return descriptor */
+struct edma_rx_return_desc {
+ u16 rrd0;
+ u16 rrd1;
+ u16 rrd2;
+ u16 rrd3;
+ u16 rrd4;
+ u16 rrd5;
+ u16 rrd6;
+ u16 rrd7;
+};
+
+/* RFD descriptor */
+struct edma_rx_free_desc {
+ __le32 buffer_addr; /* buffer address */
+};
+
+/* edma hw specific data */
+struct edma_hw {
+ u32 __iomem *hw_addr; /* inner register address */
+ struct edma_adapter *adapter; /* netdevice adapter */
+ u32 rx_intr_mask; /*rx interrupt mask */
+ u32 tx_intr_mask; /* tx interrupt nask */
+ u32 misc_intr_mask; /* misc interrupt mask */
+ u32 wol_intr_mask; /* wake on lan interrupt mask */
+ bool intr_clear_type; /* interrupt clear */
+ bool intr_sw_idx_w; /* interrupt software index */
+ u32 rx_head_buff_size; /* Rx buffer size */
+ u8 rss_type; /* rss protocol type */
+};
+
+/* edma_sw_desc stores software descriptor
+ * SW descriptor has 1:1 map with HW descriptor
+ */
+struct edma_sw_desc {
+ struct sk_buff *skb;
+ dma_addr_t dma; /* dma address */
+ u16 length; /* Tx/Rx buffer length */
+ u32 flags;
+};
+
+/* per core related information */
+struct edma_per_cpu_queues_info {
+ struct napi_struct napi; /* napi associated with the core */
+ u32 tx_mask; /* tx interrupt mask */
+ u32 rx_mask; /* rx interrupt mask */
+ u32 tx_status; /* tx interrupt status */
+ u32 rx_status; /* rx interrupt status */
+ u32 tx_start; /* tx queue start */
+ u32 rx_start; /* rx queue start */
+ struct edma_common_info *edma_cinfo; /* edma common info */
+};
+
+/* edma specific common info */
+struct edma_common_info {
+ struct edma_tx_desc_ring *tpd_ring[16]; /* 16 Tx queues */
+ struct edma_rfd_desc_ring *rfd_ring[8]; /* 8 Rx queues */
+ struct platform_device *pdev; /* device structure */
+ struct net_device *netdev[EDMA_MAX_PORTID_SUPPORTED];
+ struct net_device *portid_netdev_lookup_tbl[EDMA_MAX_PORTID_BITMAP_INDEX];
+ struct ctl_table_header *edma_ctl_table_hdr;
+ int num_gmac;
+ struct edma_ethtool_statistics edma_ethstats; /* ethtool stats */
+ int num_rx_queues; /* number of rx queue */
+ u32 num_tx_queues; /* number of tx queue */
+ u32 tx_irq[16]; /* number of tx irq */
+ u32 rx_irq[8]; /* number of rx irq */
+ u32 from_cpu; /* from CPU TPD field */
+ u32 num_rxq_per_core; /* Rx queues per core */
+ u32 num_txq_per_core; /* Tx queues per core */
+ u16 tx_ring_count; /* Tx ring count */
+ u16 rx_ring_count; /* Rx ring*/
+ u16 rx_head_buffer_len; /* rx buffer length */
+ u16 rx_page_buffer_len; /* rx buffer length */
+ u32 page_mode; /* Jumbo frame supported flag */
+ u32 fraglist_mode; /* fraglist supported flag */
+ struct edma_hw hw; /* edma hw specific structure */
+ struct edma_per_cpu_queues_info edma_percpu_info[CONFIG_NR_CPUS]; /* per cpu information */
+ spinlock_t stats_lock; /* protect edma stats area for updation */
+};
+
+/* transimit packet descriptor (tpd) ring */
+struct edma_tx_desc_ring {
+ struct netdev_queue *nq[EDMA_MAX_NETDEV_PER_QUEUE]; /* Linux queue index */
+ struct net_device *netdev[EDMA_MAX_NETDEV_PER_QUEUE];
+ /* Array of netdevs associated with the tpd ring */
+ void *hw_desc; /* descriptor ring virtual address */
+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */
+ int netdev_bmp; /* Bitmap for per-ring netdevs */
+ u32 size; /* descriptor ring length in bytes */
+ u16 count; /* number of descriptors in the ring */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 sw_next_to_fill; /* next Tx descriptor to fill */
+ u16 sw_next_to_clean; /* next Tx descriptor to clean */
+};
+
+/* receive free descriptor (rfd) ring */
+struct edma_rfd_desc_ring {
+ void *hw_desc; /* descriptor ring virtual address */
+ struct edma_sw_desc *sw_desc; /* buffer associated with ring */
+ u16 size; /* bytes allocated to sw_desc */
+ u16 count; /* number of descriptors in the ring */
+ dma_addr_t dma; /* descriptor ring physical address */
+ u16 sw_next_to_fill; /* next descriptor to fill */
+ u16 sw_next_to_clean; /* next descriptor to clean */
+};
+
+/* edma_rfs_flter_node - rfs filter node in hash table */
+struct edma_rfs_filter_node {
+ struct flow_keys keys;
+ u32 flow_id; /* flow_id of filter provided by kernel */
+ u16 filter_id; /* filter id of filter returned by adaptor */
+ u16 rq_id; /* desired rq index */
+ struct hlist_node node; /* edma rfs list node */
+};
+
+/* edma_rfs_flow_tbl - rfs flow table */
+struct edma_rfs_flow_table {
+ u16 max_num_filter; /* Maximum number of filters edma supports */
+ u16 hashtoclean; /* hash table index to clean next */
+ int filter_available; /* Number of free filters available */
+ struct hlist_head hlist_head[EDMA_RFS_FLOW_ENTRIES];
+ spinlock_t rfs_ftab_lock;
+ struct timer_list expire_rfs; /* timer function for edma_rps_may_expire_flow */
+};
+
+/* EDMA net device structure */
+struct edma_adapter {
+ struct net_device *netdev; /* netdevice */
+ struct platform_device *pdev; /* platform device */
+ struct edma_common_info *edma_cinfo; /* edma common info */
+ struct phy_device *phydev; /* Phy device */
+ struct edma_rfs_flow_table rfs; /* edma rfs flow table */
+ struct net_device_stats stats; /* netdev statistics */
+ set_rfs_filter_callback_t set_rfs_rule;
+ u32 flags;/* status flags */
+ unsigned long state_flags; /* GMAC up/down flags */
+ u32 forced_speed; /* link force speed */
+ u32 forced_duplex; /* link force duplex */
+ u32 link_state; /* phy link state */
+ u32 phy_mdio_addr; /* PHY device address on MII interface */
+ u32 poll_required; /* check if link polling is required */
+ u32 tx_start_offset[CONFIG_NR_CPUS]; /* tx queue start */
+ u32 default_vlan_tag; /* vlan tag */
+ u32 dp_bitmap;
+ uint8_t phy_id[MII_BUS_ID_SIZE + 3];
+};
+
+int edma_alloc_queues_tx(struct edma_common_info *edma_cinfo);
+int edma_alloc_queues_rx(struct edma_common_info *edma_cinfo);
+int edma_open(struct net_device *netdev);
+int edma_close(struct net_device *netdev);
+void edma_free_tx_resources(struct edma_common_info *edma_c_info);
+void edma_free_rx_resources(struct edma_common_info *edma_c_info);
+int edma_alloc_tx_rings(struct edma_common_info *edma_cinfo);
+int edma_alloc_rx_rings(struct edma_common_info *edma_cinfo);
+void edma_free_tx_rings(struct edma_common_info *edma_cinfo);
+void edma_free_rx_rings(struct edma_common_info *edma_cinfo);
+void edma_free_queues(struct edma_common_info *edma_cinfo);
+void edma_irq_disable(struct edma_common_info *edma_cinfo);
+int edma_reset(struct edma_common_info *edma_cinfo);
+int edma_poll(struct napi_struct *napi, int budget);
+netdev_tx_t edma_xmit(struct sk_buff *skb,
+ struct net_device *netdev);
+int edma_configure(struct edma_common_info *edma_cinfo);
+void edma_irq_enable(struct edma_common_info *edma_cinfo);
+void edma_enable_tx_ctrl(struct edma_hw *hw);
+void edma_enable_rx_ctrl(struct edma_hw *hw);
+void edma_stop_rx_tx(struct edma_hw *hw);
+void edma_free_irqs(struct edma_adapter *adapter);
+irqreturn_t edma_interrupt(int irq, void *dev);
+void edma_write_reg(u16 reg_addr, u32 reg_value);
+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value);
+struct net_device_stats *edma_get_stats(struct net_device *netdev);
+int edma_set_mac_addr(struct net_device *netdev, void *p);
+int edma_rx_flow_steer(struct net_device *dev, const struct sk_buff *skb,
+ u16 rxq, u32 flow_id);
+int edma_register_rfs_filter(struct net_device *netdev,
+ set_rfs_filter_callback_t set_filter);
+void edma_flow_may_expire(unsigned long data);
+void edma_set_ethtool_ops(struct net_device *netdev);
+int edma_change_mtu(struct net_device *netdev, int new_mtu);
+void edma_set_stp_rstp(bool tag);
+void edma_assign_ath_hdr_type(int tag);
+int edma_get_default_vlan_tag(struct net_device *netdev);
+void edma_adjust_link(struct net_device *netdev);
+int edma_fill_netdev(struct edma_common_info *edma_cinfo, int qid, int num, int txq_id);
+void edma_read_append_stats(struct edma_common_info *edma_cinfo);
+void edma_change_tx_coalesce(int usecs);
+void edma_change_rx_coalesce(int usecs);
+void edma_get_tx_rx_coalesce(u32 *reg_val);
+void edma_clear_irq_status(void);
+#endif /* _EDMA_H_ */
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_axi.c
@@ -0,0 +1,1220 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/cpu_rmap.h>
+#include <linux/of.h>
+#include <linux/of_net.h>
+#include <linux/timer.h>
+#include "edma.h"
+#include "ess_edma.h"
+
+/* Weight round robin and virtual QID mask */
+#define EDMA_WRR_VID_SCTL_MASK 0xffff
+
+/* Weight round robin and virtual QID shift */
+#define EDMA_WRR_VID_SCTL_SHIFT 16
+
+char edma_axi_driver_name[] = "ess_edma";
+static const u32 default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
+ NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;
+
+static u32 edma_hw_addr;
+
+struct timer_list edma_stats_timer;
+
+char edma_tx_irq[16][64];
+char edma_rx_irq[8][64];
+struct net_device *edma_netdev[EDMA_MAX_PORTID_SUPPORTED];
+static u16 tx_start[4] = {EDMA_TXQ_START_CORE0, EDMA_TXQ_START_CORE1,
+ EDMA_TXQ_START_CORE2, EDMA_TXQ_START_CORE3};
+static u32 tx_mask[4] = {EDMA_TXQ_IRQ_MASK_CORE0, EDMA_TXQ_IRQ_MASK_CORE1,
+ EDMA_TXQ_IRQ_MASK_CORE2, EDMA_TXQ_IRQ_MASK_CORE3};
+
+static u32 edma_default_ltag __read_mostly = EDMA_LAN_DEFAULT_VLAN;
+static u32 edma_default_wtag __read_mostly = EDMA_WAN_DEFAULT_VLAN;
+static u32 edma_default_group1_vtag __read_mostly = EDMA_DEFAULT_GROUP1_VLAN;
+static u32 edma_default_group2_vtag __read_mostly = EDMA_DEFAULT_GROUP2_VLAN;
+static u32 edma_default_group3_vtag __read_mostly = EDMA_DEFAULT_GROUP3_VLAN;
+static u32 edma_default_group4_vtag __read_mostly = EDMA_DEFAULT_GROUP4_VLAN;
+static u32 edma_default_group5_vtag __read_mostly = EDMA_DEFAULT_GROUP5_VLAN;
+static u32 edma_rss_idt_val = EDMA_RSS_IDT_VALUE;
+static u32 edma_rss_idt_idx;
+
+static int edma_weight_assigned_to_q __read_mostly;
+static int edma_queue_to_virtual_q __read_mostly;
+static bool edma_enable_rstp __read_mostly;
+static int edma_athr_hdr_eth_type __read_mostly;
+
+static int page_mode;
+module_param(page_mode, int, 0);
+MODULE_PARM_DESC(page_mode, "enable page mode");
+
+static int overwrite_mode;
+module_param(overwrite_mode, int, 0);
+MODULE_PARM_DESC(overwrite_mode, "overwrite default page_mode setting");
+
+static int jumbo_mru = EDMA_RX_HEAD_BUFF_SIZE;
+module_param(jumbo_mru, int, 0);
+MODULE_PARM_DESC(jumbo_mru, "enable fraglist support");
+
+static int num_rxq = 4;
+module_param(num_rxq, int, 0);
+MODULE_PARM_DESC(num_rxq, "change the number of rx queues");
+
+void edma_write_reg(u16 reg_addr, u32 reg_value)
+{
+ writel(reg_value, ((void __iomem *)(edma_hw_addr + reg_addr)));
+}
+
+void edma_read_reg(u16 reg_addr, volatile u32 *reg_value)
+{
+ *reg_value = readl((void __iomem *)(edma_hw_addr + reg_addr));
+}
+
+/* edma_change_tx_coalesce()
+ * change tx interrupt moderation timer
+ */
+void edma_change_tx_coalesce(int usecs)
+{
+ u32 reg_value;
+
+ /* Here, we right shift the value from the user by 1, this is
+ * done because IMT resolution timer is 2usecs. 1 count
+ * of this register corresponds to 2 usecs.
+ */
+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
+ reg_value = ((reg_value & 0xffff) | ((usecs >> 1) << 16));
+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
+}
+
+/* edma_change_rx_coalesce()
+ * change rx interrupt moderation timer
+ */
+void edma_change_rx_coalesce(int usecs)
+{
+ u32 reg_value;
+
+ /* Here, we right shift the value from the user by 1, this is
+ * done because IMT resolution timer is 2usecs. 1 count
+ * of this register corresponds to 2 usecs.
+ */
+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, &reg_value);
+ reg_value = ((reg_value & 0xffff0000) | (usecs >> 1));
+ edma_write_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_value);
+}
+
+/* edma_get_tx_rx_coalesce()
+ * Get tx/rx interrupt moderation value
+ */
+void edma_get_tx_rx_coalesce(u32 *reg_val)
+{
+ edma_read_reg(EDMA_REG_IRQ_MODRT_TIMER_INIT, reg_val);
+}
+
+void edma_read_append_stats(struct edma_common_info *edma_cinfo)
+{
+ uint32_t *p;
+ int i;
+ u32 stat;
+
+ spin_lock(&edma_cinfo->stats_lock);
+ p = (uint32_t *)&(edma_cinfo->edma_ethstats);
+
+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
+ edma_read_reg(EDMA_REG_TX_STAT_PKT_Q(i), &stat);
+ *p += stat;
+ p++;
+ }
+
+ for (i = 0; i < EDMA_MAX_TRANSMIT_QUEUE; i++) {
+ edma_read_reg(EDMA_REG_TX_STAT_BYTE_Q(i), &stat);
+ *p += stat;
+ p++;
+ }
+
+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
+ edma_read_reg(EDMA_REG_RX_STAT_PKT_Q(i), &stat);
+ *p += stat;
+ p++;
+ }
+
+ for (i = 0; i < EDMA_MAX_RECEIVE_QUEUE; i++) {
+ edma_read_reg(EDMA_REG_RX_STAT_BYTE_Q(i), &stat);
+ *p += stat;
+ p++;
+ }
+
+ spin_unlock(&edma_cinfo->stats_lock);
+}
+
+static void edma_statistics_timer(unsigned long data)
+{
+ struct edma_common_info *edma_cinfo = (struct edma_common_info *)data;
+
+ edma_read_append_stats(edma_cinfo);
+
+ mod_timer(&edma_stats_timer, jiffies + 1*HZ);
+}
+
+static int edma_enable_stp_rstp(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (write)
+ edma_set_stp_rstp(edma_enable_rstp);
+
+ return ret;
+}
+
+static int edma_ath_hdr_eth_type(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (write)
+ edma_assign_ath_hdr_type(edma_athr_hdr_eth_type);
+
+ return ret;
+}
+
+static int edma_change_default_lan_vlan(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ int ret;
+
+ if (!edma_netdev[1]) {
+ pr_err("Netdevice for default_lan does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[1]);
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_ltag;
+
+ return ret;
+}
+
+static int edma_change_default_wan_vlan(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ int ret;
+
+ if (!edma_netdev[0]) {
+ pr_err("Netdevice for default_wan does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[0]);
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_wtag;
+
+ return ret;
+}
+
+static int edma_change_group1_vtag(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ struct edma_common_info *edma_cinfo;
+ int ret;
+
+ if (!edma_netdev[0]) {
+ pr_err("Netdevice for Group 1 does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[0]);
+ edma_cinfo = adapter->edma_cinfo;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_group1_vtag;
+
+ return ret;
+}
+
+static int edma_change_group2_vtag(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ struct edma_common_info *edma_cinfo;
+ int ret;
+
+ if (!edma_netdev[1]) {
+ pr_err("Netdevice for Group 2 does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[1]);
+ edma_cinfo = adapter->edma_cinfo;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_group2_vtag;
+
+ return ret;
+}
+
+static int edma_change_group3_vtag(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ struct edma_common_info *edma_cinfo;
+ int ret;
+
+ if (!edma_netdev[2]) {
+ pr_err("Netdevice for Group 3 does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[2]);
+ edma_cinfo = adapter->edma_cinfo;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_group3_vtag;
+
+ return ret;
+}
+
+static int edma_change_group4_vtag(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ struct edma_common_info *edma_cinfo;
+ int ret;
+
+ if (!edma_netdev[3]) {
+ pr_err("Netdevice for Group 4 does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[3]);
+ edma_cinfo = adapter->edma_cinfo;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_group4_vtag;
+
+ return ret;
+}
+
+static int edma_change_group5_vtag(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ struct edma_adapter *adapter;
+ struct edma_common_info *edma_cinfo;
+ int ret;
+
+ if (!edma_netdev[4]) {
+ pr_err("Netdevice for Group 5 does not exist\n");
+ return -1;
+ }
+
+ adapter = netdev_priv(edma_netdev[4]);
+ edma_cinfo = adapter->edma_cinfo;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+
+ if (write)
+ adapter->default_vlan_tag = edma_default_group5_vtag;
+
+ return ret;
+}
+
+static int edma_set_rss_idt_value(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (write && !ret)
+ edma_write_reg(EDMA_REG_RSS_IDT(edma_rss_idt_idx),
+ edma_rss_idt_val);
+ return ret;
+}
+
+static int edma_set_rss_idt_idx(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret;
+ u32 old_value = edma_rss_idt_idx;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (!write || ret)
+ return ret;
+
+ if (edma_rss_idt_idx >= EDMA_NUM_IDT) {
+ pr_err("Invalid RSS indirection table index %d\n",
+ edma_rss_idt_idx);
+ edma_rss_idt_idx = old_value;
+ return -EINVAL;
+ }
+ return ret;
+}
+
+static int edma_weight_assigned_to_queues(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret, queue_id, weight;
+ u32 reg_data, data, reg_addr;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (write) {
+ queue_id = edma_weight_assigned_to_q & EDMA_WRR_VID_SCTL_MASK;
+ if (queue_id < 0 || queue_id > 15) {
+ pr_err("queue_id not within desired range\n");
+ return -EINVAL;
+ }
+
+ weight = edma_weight_assigned_to_q >> EDMA_WRR_VID_SCTL_SHIFT;
+ if (weight < 0 || weight > 0xF) {
+ pr_err("queue_id not within desired range\n");
+ return -EINVAL;
+ }
+
+ data = weight << EDMA_WRR_SHIFT(queue_id);
+
+ reg_addr = EDMA_REG_WRR_CTRL_Q0_Q3 + (queue_id & ~0x3);
+ edma_read_reg(reg_addr, &reg_data);
+ reg_data &= ~(1 << EDMA_WRR_SHIFT(queue_id));
+ edma_write_reg(reg_addr, data | reg_data);
+ }
+
+ return ret;
+}
+
+static int edma_queue_to_virtual_queue_map(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret, queue_id, virtual_qid;
+ u32 reg_data, data, reg_addr;
+
+ ret = proc_dointvec(table, write, buffer, lenp, ppos);
+ if (write) {
+ queue_id = edma_queue_to_virtual_q & EDMA_WRR_VID_SCTL_MASK;
+ if (queue_id < 0 || queue_id > 15) {
+ pr_err("queue_id not within desired range\n");
+ return -EINVAL;
+ }
+
+ virtual_qid = edma_queue_to_virtual_q >>
+ EDMA_WRR_VID_SCTL_SHIFT;
+ if (virtual_qid < 0 || virtual_qid > 8) {
+ pr_err("queue_id not within desired range\n");
+ return -EINVAL;
+ }
+
+ data = virtual_qid << EDMA_VQ_ID_SHIFT(queue_id);
+
+ reg_addr = EDMA_REG_VQ_CTRL0 + (queue_id & ~0x3);
+ edma_read_reg(reg_addr, &reg_data);
+ reg_data &= ~(1 << EDMA_VQ_ID_SHIFT(queue_id));
+ edma_write_reg(reg_addr, data | reg_data);
+ }
+
+ return ret;
+}
+
+static struct ctl_table edma_table[] = {
+ {
+ .procname = "default_lan_tag",
+ .data = &edma_default_ltag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_default_lan_vlan
+ },
+ {
+ .procname = "default_wan_tag",
+ .data = &edma_default_wtag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_default_wan_vlan
+ },
+ {
+ .procname = "weight_assigned_to_queues",
+ .data = &edma_weight_assigned_to_q,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_weight_assigned_to_queues
+ },
+ {
+ .procname = "queue_to_virtual_queue_map",
+ .data = &edma_queue_to_virtual_q,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_queue_to_virtual_queue_map
+ },
+ {
+ .procname = "enable_stp_rstp",
+ .data = &edma_enable_rstp,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_enable_stp_rstp
+ },
+ {
+ .procname = "athr_hdr_eth_type",
+ .data = &edma_athr_hdr_eth_type,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_ath_hdr_eth_type
+ },
+ {
+ .procname = "default_group1_vlan_tag",
+ .data = &edma_default_group1_vtag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_group1_vtag
+ },
+ {
+ .procname = "default_group2_vlan_tag",
+ .data = &edma_default_group2_vtag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_group2_vtag
+ },
+ {
+ .procname = "default_group3_vlan_tag",
+ .data = &edma_default_group3_vtag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_group3_vtag
+ },
+ {
+ .procname = "default_group4_vlan_tag",
+ .data = &edma_default_group4_vtag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_group4_vtag
+ },
+ {
+ .procname = "default_group5_vlan_tag",
+ .data = &edma_default_group5_vtag,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_change_group5_vtag
+ },
+ {
+ .procname = "edma_rss_idt_value",
+ .data = &edma_rss_idt_val,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_set_rss_idt_value
+ },
+ {
+ .procname = "edma_rss_idt_idx",
+ .data = &edma_rss_idt_idx,
+ .maxlen = sizeof(int),
+ .mode = 0644,
+ .proc_handler = edma_set_rss_idt_idx
+ },
+ {}
+};
+
+/* edma_axi_netdev_ops
+ * Describe the operations supported by registered netdevices
+ *
+ * static const struct net_device_ops edma_axi_netdev_ops = {
+ * .ndo_open = edma_open,
+ * .ndo_stop = edma_close,
+ * .ndo_start_xmit = edma_xmit_frame,
+ * .ndo_set_mac_address = edma_set_mac_addr,
+ * }
+ */
+static const struct net_device_ops edma_axi_netdev_ops = {
+ .ndo_open = edma_open,
+ .ndo_stop = edma_close,
+ .ndo_start_xmit = edma_xmit,
+ .ndo_set_mac_address = edma_set_mac_addr,
+#ifdef CONFIG_RFS_ACCEL
+ .ndo_rx_flow_steer = edma_rx_flow_steer,
+ .ndo_register_rfs_filter = edma_register_rfs_filter,
+ .ndo_get_default_vlan_tag = edma_get_default_vlan_tag,
+#endif
+ .ndo_get_stats = edma_get_stats,
+ .ndo_change_mtu = edma_change_mtu,
+};
+
+/* edma_axi_probe()
+ * Initialise an adapter identified by a platform_device structure.
+ *
+ * The OS initialization, configuring of the adapter private structure,
+ * and a hardware reset occur in the probe.
+ */
+static int edma_axi_probe(struct platform_device *pdev)
+{
+ struct edma_common_info *edma_cinfo;
+ struct edma_hw *hw;
+ struct edma_adapter *adapter[EDMA_MAX_PORTID_SUPPORTED];
+ struct resource *res;
+ struct device_node *np = pdev->dev.of_node;
+ struct device_node *pnp;
+ struct device_node *mdio_node = NULL;
+ struct platform_device *mdio_plat = NULL;
+ struct mii_bus *miibus = NULL;
+ struct edma_mdio_data *mdio_data = NULL;
+ int i, j, k, err = 0;
+ int portid_bmp;
+ int idx = 0, idx_mac = 0;
+
+ if (CONFIG_NR_CPUS != EDMA_CPU_CORES_SUPPORTED) {
+ dev_err(&pdev->dev, "Invalid CPU Cores\n");
+ return -EINVAL;
+ }
+
+ if ((num_rxq != 4) && (num_rxq != 8)) {
+ dev_err(&pdev->dev, "Invalid RX queue, edma probe failed\n");
+ return -EINVAL;
+ }
+ edma_cinfo = kzalloc(sizeof(struct edma_common_info), GFP_KERNEL);
+ if (!edma_cinfo) {
+ err = -ENOMEM;
+ goto err_alloc;
+ }
+
+ edma_cinfo->pdev = pdev;
+
+ of_property_read_u32(np, "qcom,num_gmac", &edma_cinfo->num_gmac);
+ if (edma_cinfo->num_gmac > EDMA_MAX_PORTID_SUPPORTED) {
+ pr_err("Invalid DTSI Entry for qcom,num_gmac\n");
+ err = -EINVAL;
+ goto err_cinfo;
+ }
+
+ /* Initialize the netdev array before allocation
+ * to avoid double free
+ */
+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++)
+ edma_netdev[i] = NULL;
+
+ for (i = 0 ; i < edma_cinfo->num_gmac ; i++) {
+ edma_netdev[i] = alloc_etherdev_mqs(sizeof(struct edma_adapter),
+ EDMA_NETDEV_TX_QUEUE, EDMA_NETDEV_RX_QUEUE);
+
+ if (!edma_netdev[i]) {
+ dev_err(&pdev->dev,
+ "net device alloc fails for index=%d\n", i);
+ err = -ENODEV;
+ goto err_ioremap;
+ }
+
+ SET_NETDEV_DEV(edma_netdev[i], &pdev->dev);
+ platform_set_drvdata(pdev, edma_netdev[i]);
+ edma_cinfo->netdev[i] = edma_netdev[i];
+ }
+
+ /* Fill ring details */
+ edma_cinfo->num_tx_queues = EDMA_MAX_TRANSMIT_QUEUE;
+ edma_cinfo->num_txq_per_core = (EDMA_MAX_TRANSMIT_QUEUE / 4);
+ edma_cinfo->tx_ring_count = EDMA_TX_RING_SIZE;
+
+ /* Update num rx queues based on module parameter */
+ edma_cinfo->num_rx_queues = num_rxq;
+ edma_cinfo->num_rxq_per_core = ((num_rxq == 4) ? 1 : 2);
+
+ edma_cinfo->rx_ring_count = EDMA_RX_RING_SIZE;
+
+ hw = &edma_cinfo->hw;
+
+ /* Fill HW defaults */
+ hw->tx_intr_mask = EDMA_TX_IMR_NORMAL_MASK;
+ hw->rx_intr_mask = EDMA_RX_IMR_NORMAL_MASK;
+
+ of_property_read_u32(np, "qcom,page-mode", &edma_cinfo->page_mode);
+ of_property_read_u32(np, "qcom,rx_head_buf_size",
+ &hw->rx_head_buff_size);
+
+ if (overwrite_mode) {
+ dev_info(&pdev->dev, "page mode overwritten");
+ edma_cinfo->page_mode = page_mode;
+ }
+
+ if (jumbo_mru)
+ edma_cinfo->fraglist_mode = 1;
+
+ if (edma_cinfo->page_mode)
+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE_JUMBO;
+ else if (edma_cinfo->fraglist_mode)
+ hw->rx_head_buff_size = jumbo_mru;
+ else if (!hw->rx_head_buff_size)
+ hw->rx_head_buff_size = EDMA_RX_HEAD_BUFF_SIZE;
+
+ hw->misc_intr_mask = 0;
+ hw->wol_intr_mask = 0;
+
+ hw->intr_clear_type = EDMA_INTR_CLEAR_TYPE;
+ hw->intr_sw_idx_w = EDMA_INTR_SW_IDX_W_TYPE;
+
+ /* configure RSS type to the different protocol that can be
+ * supported
+ */
+ hw->rss_type = EDMA_RSS_TYPE_IPV4TCP | EDMA_RSS_TYPE_IPV6_TCP |
+ EDMA_RSS_TYPE_IPV4_UDP | EDMA_RSS_TYPE_IPV6UDP |
+ EDMA_RSS_TYPE_IPV4 | EDMA_RSS_TYPE_IPV6;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ edma_cinfo->hw.hw_addr = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(edma_cinfo->hw.hw_addr)) {
+ err = PTR_ERR(edma_cinfo->hw.hw_addr);
+ goto err_ioremap;
+ }
+
+ edma_hw_addr = (u32)edma_cinfo->hw.hw_addr;
+
+ /* Parse tx queue interrupt number from device tree */
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++)
+ edma_cinfo->tx_irq[i] = platform_get_irq(pdev, i);
+
+ /* Parse rx queue interrupt number from device tree
+ * Here we are setting j to point to the point where we
+ * left tx interrupt parsing(i.e 16) and run run the loop
+ * from 0 to 7 to parse rx interrupt number.
+ */
+ for (i = 0, j = edma_cinfo->num_tx_queues, k = 0;
+ i < edma_cinfo->num_rx_queues; i++) {
+ edma_cinfo->rx_irq[k] = platform_get_irq(pdev, j);
+ k += ((num_rxq == 4) ? 2 : 1);
+ j += ((num_rxq == 4) ? 2 : 1);
+ }
+
+ edma_cinfo->rx_head_buffer_len = edma_cinfo->hw.rx_head_buff_size;
+ edma_cinfo->rx_page_buffer_len = PAGE_SIZE;
+
+ err = edma_alloc_queues_tx(edma_cinfo);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation of TX queue failed\n");
+ goto err_tx_qinit;
+ }
+
+ err = edma_alloc_queues_rx(edma_cinfo);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation of RX queue failed\n");
+ goto err_rx_qinit;
+ }
+
+ err = edma_alloc_tx_rings(edma_cinfo);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation of TX resources failed\n");
+ goto err_tx_rinit;
+ }
+
+ err = edma_alloc_rx_rings(edma_cinfo);
+ if (err) {
+ dev_err(&pdev->dev, "Allocation of RX resources failed\n");
+ goto err_rx_rinit;
+ }
+
+ /* Initialize netdev and netdev bitmap for transmit descriptor rings */
+ for (i = 0; i < edma_cinfo->num_tx_queues; i++) {
+ struct edma_tx_desc_ring *etdr = edma_cinfo->tpd_ring[i];
+ int j;
+
+ etdr->netdev_bmp = 0;
+ for (j = 0; j < EDMA_MAX_NETDEV_PER_QUEUE; j++) {
+ etdr->netdev[j] = NULL;
+ etdr->nq[j] = NULL;
+ }
+ }
+
+ if (of_property_read_bool(np, "qcom,mdio_supported")) {
+ mdio_node = of_find_compatible_node(NULL, NULL,
+ "qcom,ipq4019-mdio");
+ if (!mdio_node) {
+ dev_err(&pdev->dev, "cannot find mdio node by phandle");
+ err = -EIO;
+ goto err_mdiobus_init_fail;
+ }
+
+ mdio_plat = of_find_device_by_node(mdio_node);
+ if (!mdio_plat) {
+ dev_err(&pdev->dev,
+ "cannot find platform device from mdio node");
+ of_node_put(mdio_node);
+ err = -EIO;
+ goto err_mdiobus_init_fail;
+ }
+
+ mdio_data = dev_get_drvdata(&mdio_plat->dev);
+ if (!mdio_data) {
+ dev_err(&pdev->dev,
+ "cannot get mii bus reference from device data");
+ of_node_put(mdio_node);
+ err = -EIO;
+ goto err_mdiobus_init_fail;
+ }
+
+ miibus = mdio_data->mii_bus;
+ }
+
+ for_each_available_child_of_node(np, pnp) {
+ const char *mac_addr;
+
+ /* this check is needed if parent and daughter dts have
+ * different number of gmac nodes
+ */
+ if (idx_mac == edma_cinfo->num_gmac) {
+ of_node_put(np);
+ break;
+ }
+
+ mac_addr = of_get_mac_address(pnp);
+ if (mac_addr)
+ memcpy(edma_netdev[idx_mac]->dev_addr, mac_addr, ETH_ALEN);
+
+ idx_mac++;
+ }
+
+ /* Populate the adapter structure register the netdevice */
+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
+ int k, m;
+
+ adapter[i] = netdev_priv(edma_netdev[i]);
+ adapter[i]->netdev = edma_netdev[i];
+ adapter[i]->pdev = pdev;
+ for (j = 0; j < CONFIG_NR_CPUS; j++) {
+ m = i % 2;
+ adapter[i]->tx_start_offset[j] =
+ ((j << EDMA_TX_CPU_START_SHIFT) + (m << 1));
+ /* Share the queues with available net-devices.
+ * For instance , with 5 net-devices
+ * eth0/eth2/eth4 will share q0,q1,q4,q5,q8,q9,q12,q13
+ * and eth1/eth3 will get the remaining.
+ */
+ for (k = adapter[i]->tx_start_offset[j]; k <
+ (adapter[i]->tx_start_offset[j] + 2); k++) {
+ if (edma_fill_netdev(edma_cinfo, k, i, j)) {
+ pr_err("Netdev overflow Error\n");
+ goto err_register;
+ }
+ }
+ }
+
+ adapter[i]->edma_cinfo = edma_cinfo;
+ edma_netdev[i]->netdev_ops = &edma_axi_netdev_ops;
+ edma_netdev[i]->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM
+ | NETIF_F_HW_VLAN_CTAG_TX
+ | NETIF_F_HW_VLAN_CTAG_RX | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_GRO;
+ edma_netdev[i]->hw_features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_HW_VLAN_CTAG_RX
+ | NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_GRO;
+ edma_netdev[i]->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_GRO;
+ edma_netdev[i]->wanted_features = NETIF_F_HW_CSUM | NETIF_F_SG |
+ NETIF_F_TSO | NETIF_F_TSO6 |
+ NETIF_F_GRO;
+
+#ifdef CONFIG_RFS_ACCEL
+ edma_netdev[i]->features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
+ edma_netdev[i]->hw_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
+ edma_netdev[i]->vlan_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
+ edma_netdev[i]->wanted_features |= NETIF_F_RXHASH | NETIF_F_NTUPLE;
+#endif
+ edma_set_ethtool_ops(edma_netdev[i]);
+
+ /* This just fill in some default MAC address
+ */
+ if (!is_valid_ether_addr(edma_netdev[i]->dev_addr)) {
+ random_ether_addr(edma_netdev[i]->dev_addr);
+ pr_info("EDMA using MAC@ - using");
+ pr_info("%02x:%02x:%02x:%02x:%02x:%02x\n",
+ *(edma_netdev[i]->dev_addr),
+ *(edma_netdev[i]->dev_addr + 1),
+ *(edma_netdev[i]->dev_addr + 2),
+ *(edma_netdev[i]->dev_addr + 3),
+ *(edma_netdev[i]->dev_addr + 4),
+ *(edma_netdev[i]->dev_addr + 5));
+ }
+
+ err = register_netdev(edma_netdev[i]);
+ if (err)
+ goto err_register;
+
+ /* carrier off reporting is important to
+ * ethtool even BEFORE open
+ */
+ netif_carrier_off(edma_netdev[i]);
+
+ /* Allocate reverse irq cpu mapping structure for
+ * receive queues
+ */
+#ifdef CONFIG_RFS_ACCEL
+ edma_netdev[i]->rx_cpu_rmap =
+ alloc_irq_cpu_rmap(EDMA_NETDEV_RX_QUEUE);
+ if (!edma_netdev[i]->rx_cpu_rmap) {
+ err = -ENOMEM;
+ goto err_rmap_alloc_fail;
+ }
+#endif
+ }
+
+ for (i = 0; i < EDMA_MAX_PORTID_BITMAP_INDEX; i++)
+ edma_cinfo->portid_netdev_lookup_tbl[i] = NULL;
+
+ for_each_available_child_of_node(np, pnp) {
+ const uint32_t *vlan_tag = NULL;
+ int len;
+
+ /* this check is needed if parent and daughter dts have
+ * different number of gmac nodes
+ */
+ if (idx == edma_cinfo->num_gmac)
+ break;
+
+ /* Populate port-id to netdev lookup table */
+ vlan_tag = of_get_property(pnp, "vlan_tag", &len);
+ if (!vlan_tag) {
+ pr_err("Vlan tag parsing Failed.\n");
+ goto err_rmap_alloc_fail;
+ }
+
+ adapter[idx]->default_vlan_tag = of_read_number(vlan_tag, 1);
+ vlan_tag++;
+ portid_bmp = of_read_number(vlan_tag, 1);
+ adapter[idx]->dp_bitmap = portid_bmp;
+
+ portid_bmp = portid_bmp >> 1; /* We ignore CPU Port bit 0 */
+ while (portid_bmp) {
+ int port_bit = ffs(portid_bmp);
+
+ if (port_bit > EDMA_MAX_PORTID_SUPPORTED)
+ goto err_rmap_alloc_fail;
+ edma_cinfo->portid_netdev_lookup_tbl[port_bit] =
+ edma_netdev[idx];
+ portid_bmp &= ~(1 << (port_bit - 1));
+ }
+
+ if (!of_property_read_u32(pnp, "qcom,poll_required",
+ &adapter[idx]->poll_required)) {
+ if (adapter[idx]->poll_required) {
+ of_property_read_u32(pnp, "qcom,phy_mdio_addr",
+ &adapter[idx]->phy_mdio_addr);
+ of_property_read_u32(pnp, "qcom,forced_speed",
+ &adapter[idx]->forced_speed);
+ of_property_read_u32(pnp, "qcom,forced_duplex",
+ &adapter[idx]->forced_duplex);
+
+ /* create a phyid using MDIO bus id
+ * and MDIO bus address
+ */
+ snprintf(adapter[idx]->phy_id,
+ MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
+ miibus->id,
+ adapter[idx]->phy_mdio_addr);
+ }
+ } else {
+ adapter[idx]->poll_required = 0;
+ adapter[idx]->forced_speed = SPEED_1000;
+ adapter[idx]->forced_duplex = DUPLEX_FULL;
+ }
+
+ idx++;
+ }
+
+ edma_cinfo->edma_ctl_table_hdr = register_net_sysctl(&init_net,
+ "net/edma",
+ edma_table);
+ if (!edma_cinfo->edma_ctl_table_hdr) {
+ dev_err(&pdev->dev, "edma sysctl table hdr not registered\n");
+ goto err_unregister_sysctl_tbl;
+ }
+
+ /* Disable all 16 Tx and 8 rx irqs */
+ edma_irq_disable(edma_cinfo);
+
+ err = edma_reset(edma_cinfo);
+ if (err) {
+ err = -EIO;
+ goto err_reset;
+ }
+
+ /* populate per_core_info, do a napi_Add, request 16 TX irqs,
+ * 8 RX irqs, do a napi enable
+ */
+ for (i = 0; i < CONFIG_NR_CPUS; i++) {
+ u8 rx_start;
+
+ edma_cinfo->edma_percpu_info[i].napi.state = 0;
+
+ netif_napi_add(edma_netdev[0],
+ &edma_cinfo->edma_percpu_info[i].napi,
+ edma_poll, 64);
+ napi_enable(&edma_cinfo->edma_percpu_info[i].napi);
+ edma_cinfo->edma_percpu_info[i].tx_mask = tx_mask[i];
+ edma_cinfo->edma_percpu_info[i].rx_mask = EDMA_RX_PER_CPU_MASK
+ << (i << EDMA_RX_PER_CPU_MASK_SHIFT);
+ edma_cinfo->edma_percpu_info[i].tx_start = tx_start[i];
+ edma_cinfo->edma_percpu_info[i].rx_start =
+ i << EDMA_RX_CPU_START_SHIFT;
+ rx_start = i << EDMA_RX_CPU_START_SHIFT;
+ edma_cinfo->edma_percpu_info[i].tx_status = 0;
+ edma_cinfo->edma_percpu_info[i].rx_status = 0;
+ edma_cinfo->edma_percpu_info[i].edma_cinfo = edma_cinfo;
+
+ /* Request irq per core */
+ for (j = edma_cinfo->edma_percpu_info[i].tx_start;
+ j < tx_start[i] + 4; j++) {
+ sprintf(&edma_tx_irq[j][0], "edma_eth_tx%d", j);
+ err = request_irq(edma_cinfo->tx_irq[j],
+ edma_interrupt,
+ 0,
+ &edma_tx_irq[j][0],
+ &edma_cinfo->edma_percpu_info[i]);
+ if (err)
+ goto err_reset;
+ }
+
+ for (j = edma_cinfo->edma_percpu_info[i].rx_start;
+ j < (rx_start +
+ ((edma_cinfo->num_rx_queues == 4) ? 1 : 2));
+ j++) {
+ sprintf(&edma_rx_irq[j][0], "edma_eth_rx%d", j);
+ err = request_irq(edma_cinfo->rx_irq[j],
+ edma_interrupt,
+ 0,
+ &edma_rx_irq[j][0],
+ &edma_cinfo->edma_percpu_info[i]);
+ if (err)
+ goto err_reset;
+ }
+
+#ifdef CONFIG_RFS_ACCEL
+ for (j = edma_cinfo->edma_percpu_info[i].rx_start;
+ j < rx_start + 2; j += 2) {
+ err = irq_cpu_rmap_add(edma_netdev[0]->rx_cpu_rmap,
+ edma_cinfo->rx_irq[j]);
+ if (err)
+ goto err_rmap_add_fail;
+ }
+#endif
+ }
+
+ /* Used to clear interrupt status, allocate rx buffer,
+ * configure edma descriptors registers
+ */
+ err = edma_configure(edma_cinfo);
+ if (err) {
+ err = -EIO;
+ goto err_configure;
+ }
+
+ /* Configure RSS indirection table.
+ * 128 hash will be configured in the following
+ * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively
+ * and so on
+ */
+ for (i = 0; i < EDMA_NUM_IDT; i++)
+ edma_write_reg(EDMA_REG_RSS_IDT(i), EDMA_RSS_IDT_VALUE);
+
+ /* Configure load balance mapping table.
+ * 4 table entry will be configured according to the
+ * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4}
+ * respectively.
+ */
+ edma_write_reg(EDMA_REG_LB_RING, EDMA_LB_REG_VALUE);
+
+ /* Configure Virtual queue for Tx rings
+ * User can also change this value runtime through
+ * a sysctl
+ */
+ edma_write_reg(EDMA_REG_VQ_CTRL0, EDMA_VQ_REG_VALUE);
+ edma_write_reg(EDMA_REG_VQ_CTRL1, EDMA_VQ_REG_VALUE);
+
+ /* Configure Max AXI Burst write size to 128 bytes*/
+ edma_write_reg(EDMA_REG_AXIW_CTRL_MAXWRSIZE,
+ EDMA_AXIW_MAXWRSIZE_VALUE);
+
+ /* Enable All 16 tx and 8 rx irq mask */
+ edma_irq_enable(edma_cinfo);
+ edma_enable_tx_ctrl(&edma_cinfo->hw);
+ edma_enable_rx_ctrl(&edma_cinfo->hw);
+
+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
+ if (adapter[i]->poll_required) {
+ adapter[i]->phydev =
+ phy_connect(edma_netdev[i],
+ (const char *)adapter[i]->phy_id,
+ &edma_adjust_link,
+ PHY_INTERFACE_MODE_SGMII);
+ if (IS_ERR(adapter[i]->phydev)) {
+ dev_dbg(&pdev->dev, "PHY attach FAIL");
+ err = -EIO;
+ goto edma_phy_attach_fail;
+ } else {
+ adapter[i]->phydev->advertising |=
+ ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause;
+ adapter[i]->phydev->supported |=
+ SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause;
+ }
+ } else {
+ adapter[i]->phydev = NULL;
+ }
+ }
+
+ spin_lock_init(&edma_cinfo->stats_lock);
+
+ init_timer(&edma_stats_timer);
+ edma_stats_timer.expires = jiffies + 1*HZ;
+ edma_stats_timer.data = (unsigned long)edma_cinfo;
+ edma_stats_timer.function = edma_statistics_timer; /* timer handler */
+ add_timer(&edma_stats_timer);
+
+ return 0;
+
+edma_phy_attach_fail:
+ miibus = NULL;
+err_configure:
+#ifdef CONFIG_RFS_ACCEL
+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
+ free_irq_cpu_rmap(adapter[i]->netdev->rx_cpu_rmap);
+ adapter[i]->netdev->rx_cpu_rmap = NULL;
+ }
+#endif
+err_rmap_add_fail:
+ edma_free_irqs(adapter[0]);
+ for (i = 0; i < CONFIG_NR_CPUS; i++)
+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
+err_reset:
+err_unregister_sysctl_tbl:
+err_rmap_alloc_fail:
+ for (i = 0; i < edma_cinfo->num_gmac; i++)
+ unregister_netdev(edma_netdev[i]);
+err_register:
+err_mdiobus_init_fail:
+ edma_free_rx_rings(edma_cinfo);
+err_rx_rinit:
+ edma_free_tx_rings(edma_cinfo);
+err_tx_rinit:
+ edma_free_queues(edma_cinfo);
+err_rx_qinit:
+err_tx_qinit:
+ iounmap(edma_cinfo->hw.hw_addr);
+err_ioremap:
+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
+ if (edma_netdev[i])
+ free_netdev(edma_netdev[i]);
+ }
+err_cinfo:
+ kfree(edma_cinfo);
+err_alloc:
+ return err;
+}
+
+/* edma_axi_remove()
+ * Device Removal Routine
+ *
+ * edma_axi_remove is called by the platform subsystem to alert the driver
+ * that it should release a platform device.
+ */
+static int edma_axi_remove(struct platform_device *pdev)
+{
+ struct edma_adapter *adapter = netdev_priv(edma_netdev[0]);
+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+ struct edma_hw *hw = &edma_cinfo->hw;
+ int i;
+
+ for (i = 0; i < edma_cinfo->num_gmac; i++)
+ unregister_netdev(edma_netdev[i]);
+
+ edma_stop_rx_tx(hw);
+ for (i = 0; i < CONFIG_NR_CPUS; i++)
+ napi_disable(&edma_cinfo->edma_percpu_info[i].napi);
+
+ edma_irq_disable(edma_cinfo);
+ edma_write_reg(EDMA_REG_RX_ISR, 0xff);
+ edma_write_reg(EDMA_REG_TX_ISR, 0xffff);
+#ifdef CONFIG_RFS_ACCEL
+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
+ free_irq_cpu_rmap(edma_netdev[i]->rx_cpu_rmap);
+ edma_netdev[i]->rx_cpu_rmap = NULL;
+ }
+#endif
+
+ for (i = 0; i < edma_cinfo->num_gmac; i++) {
+ struct edma_adapter *adapter = netdev_priv(edma_netdev[i]);
+
+ if (adapter->phydev)
+ phy_disconnect(adapter->phydev);
+ }
+
+ del_timer_sync(&edma_stats_timer);
+ edma_free_irqs(adapter);
+ unregister_net_sysctl_table(edma_cinfo->edma_ctl_table_hdr);
+ edma_free_tx_resources(edma_cinfo);
+ edma_free_rx_resources(edma_cinfo);
+ edma_free_tx_rings(edma_cinfo);
+ edma_free_rx_rings(edma_cinfo);
+ edma_free_queues(edma_cinfo);
+ for (i = 0; i < edma_cinfo->num_gmac; i++)
+ free_netdev(edma_netdev[i]);
+
+ kfree(edma_cinfo);
+
+ return 0;
+}
+
+static const struct of_device_id edma_of_mtable[] = {
+ {.compatible = "qcom,ess-edma" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, edma_of_mtable);
+
+static struct platform_driver edma_axi_driver = {
+ .driver = {
+ .name = edma_axi_driver_name,
+ .of_match_table = edma_of_mtable,
+ },
+ .probe = edma_axi_probe,
+ .remove = edma_axi_remove,
+};
+
+module_platform_driver(edma_axi_driver);
+
+MODULE_AUTHOR("Qualcomm Atheros Inc");
+MODULE_DESCRIPTION("QCA ESS EDMA driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/edma_ethtool.c
@@ -0,0 +1,374 @@
+/*
+ * Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/string.h>
+#include "edma.h"
+
+struct edma_ethtool_stats {
+ uint8_t stat_string[ETH_GSTRING_LEN];
+ uint32_t stat_offset;
+};
+
+#define EDMA_STAT(m) offsetof(struct edma_ethtool_statistics, m)
+#define DRVINFO_LEN 32
+
+/* Array of strings describing statistics
+ */
+static const struct edma_ethtool_stats edma_gstrings_stats[] = {
+ {"tx_q0_pkt", EDMA_STAT(tx_q0_pkt)},
+ {"tx_q1_pkt", EDMA_STAT(tx_q1_pkt)},
+ {"tx_q2_pkt", EDMA_STAT(tx_q2_pkt)},
+ {"tx_q3_pkt", EDMA_STAT(tx_q3_pkt)},
+ {"tx_q4_pkt", EDMA_STAT(tx_q4_pkt)},
+ {"tx_q5_pkt", EDMA_STAT(tx_q5_pkt)},
+ {"tx_q6_pkt", EDMA_STAT(tx_q6_pkt)},
+ {"tx_q7_pkt", EDMA_STAT(tx_q7_pkt)},
+ {"tx_q8_pkt", EDMA_STAT(tx_q8_pkt)},
+ {"tx_q9_pkt", EDMA_STAT(tx_q9_pkt)},
+ {"tx_q10_pkt", EDMA_STAT(tx_q10_pkt)},
+ {"tx_q11_pkt", EDMA_STAT(tx_q11_pkt)},
+ {"tx_q12_pkt", EDMA_STAT(tx_q12_pkt)},
+ {"tx_q13_pkt", EDMA_STAT(tx_q13_pkt)},
+ {"tx_q14_pkt", EDMA_STAT(tx_q14_pkt)},
+ {"tx_q15_pkt", EDMA_STAT(tx_q15_pkt)},
+ {"tx_q0_byte", EDMA_STAT(tx_q0_byte)},
+ {"tx_q1_byte", EDMA_STAT(tx_q1_byte)},
+ {"tx_q2_byte", EDMA_STAT(tx_q2_byte)},
+ {"tx_q3_byte", EDMA_STAT(tx_q3_byte)},
+ {"tx_q4_byte", EDMA_STAT(tx_q4_byte)},
+ {"tx_q5_byte", EDMA_STAT(tx_q5_byte)},
+ {"tx_q6_byte", EDMA_STAT(tx_q6_byte)},
+ {"tx_q7_byte", EDMA_STAT(tx_q7_byte)},
+ {"tx_q8_byte", EDMA_STAT(tx_q8_byte)},
+ {"tx_q9_byte", EDMA_STAT(tx_q9_byte)},
+ {"tx_q10_byte", EDMA_STAT(tx_q10_byte)},
+ {"tx_q11_byte", EDMA_STAT(tx_q11_byte)},
+ {"tx_q12_byte", EDMA_STAT(tx_q12_byte)},
+ {"tx_q13_byte", EDMA_STAT(tx_q13_byte)},
+ {"tx_q14_byte", EDMA_STAT(tx_q14_byte)},
+ {"tx_q15_byte", EDMA_STAT(tx_q15_byte)},
+ {"rx_q0_pkt", EDMA_STAT(rx_q0_pkt)},
+ {"rx_q1_pkt", EDMA_STAT(rx_q1_pkt)},
+ {"rx_q2_pkt", EDMA_STAT(rx_q2_pkt)},
+ {"rx_q3_pkt", EDMA_STAT(rx_q3_pkt)},
+ {"rx_q4_pkt", EDMA_STAT(rx_q4_pkt)},
+ {"rx_q5_pkt", EDMA_STAT(rx_q5_pkt)},
+ {"rx_q6_pkt", EDMA_STAT(rx_q6_pkt)},
+ {"rx_q7_pkt", EDMA_STAT(rx_q7_pkt)},
+ {"rx_q0_byte", EDMA_STAT(rx_q0_byte)},
+ {"rx_q1_byte", EDMA_STAT(rx_q1_byte)},
+ {"rx_q2_byte", EDMA_STAT(rx_q2_byte)},
+ {"rx_q3_byte", EDMA_STAT(rx_q3_byte)},
+ {"rx_q4_byte", EDMA_STAT(rx_q4_byte)},
+ {"rx_q5_byte", EDMA_STAT(rx_q5_byte)},
+ {"rx_q6_byte", EDMA_STAT(rx_q6_byte)},
+ {"rx_q7_byte", EDMA_STAT(rx_q7_byte)},
+ {"tx_desc_error", EDMA_STAT(tx_desc_error)},
+};
+
+#define EDMA_STATS_LEN ARRAY_SIZE(edma_gstrings_stats)
+
+/* edma_get_strset_count()
+ * Get strset count
+ */
+static int edma_get_strset_count(struct net_device *netdev,
+ int sset)
+{
+ switch (sset) {
+ case ETH_SS_STATS:
+ return EDMA_STATS_LEN;
+ default:
+ netdev_dbg(netdev, "%s: Invalid string set", __func__);
+ return -EOPNOTSUPP;
+ }
+}
+
+
+/* edma_get_strings()
+ * get stats string
+ */
+static void edma_get_strings(struct net_device *netdev, uint32_t stringset,
+ uint8_t *data)
+{
+ uint8_t *p = data;
+ uint32_t i;
+
+ switch (stringset) {
+ case ETH_SS_STATS:
+ for (i = 0; i < EDMA_STATS_LEN; i++) {
+ memcpy(p, edma_gstrings_stats[i].stat_string,
+ min((size_t)ETH_GSTRING_LEN,
+ strlen(edma_gstrings_stats[i].stat_string)
+ + 1));
+ p += ETH_GSTRING_LEN;
+ }
+ break;
+ }
+}
+
+/* edma_get_ethtool_stats()
+ * Get ethtool statistics
+ */
+static void edma_get_ethtool_stats(struct net_device *netdev,
+ struct ethtool_stats *stats, uint64_t *data)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+ int i;
+ uint8_t *p = NULL;
+
+ edma_read_append_stats(edma_cinfo);
+
+ for(i = 0; i < EDMA_STATS_LEN; i++) {
+ p = (uint8_t *)&(edma_cinfo->edma_ethstats) +
+ edma_gstrings_stats[i].stat_offset;
+ data[i] = *(uint32_t *)p;
+ }
+}
+
+/* edma_get_drvinfo()
+ * get edma driver info
+ */
+static void edma_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strlcpy(info->driver, "ess_edma", DRVINFO_LEN);
+ strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN);
+}
+
+/* edma_nway_reset()
+ * Reset the phy, if available.
+ */
+static int edma_nway_reset(struct net_device *netdev)
+{
+ return -EINVAL;
+}
+
+/* edma_get_wol()
+ * get wake on lan info
+ */
+static void edma_get_wol(struct net_device *netdev,
+ struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+}
+
+/* edma_get_msglevel()
+ * get message level.
+ */
+static uint32_t edma_get_msglevel(struct net_device *netdev)
+{
+ return 0;
+}
+
+/* edma_get_settings()
+ * Get edma settings
+ */
+static int edma_get_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+
+ if (adapter->poll_required) {
+ struct phy_device *phydev = NULL;
+ uint16_t phyreg;
+
+ if ((adapter->forced_speed != SPEED_UNKNOWN)
+ && !(adapter->poll_required))
+ return -EPERM;
+
+ phydev = adapter->phydev;
+
+ ecmd->advertising = phydev->advertising;
+ ecmd->autoneg = phydev->autoneg;
+
+ if (adapter->link_state == __EDMA_LINKDOWN) {
+ ecmd->speed = SPEED_UNKNOWN;
+ ecmd->duplex = DUPLEX_UNKNOWN;
+ } else {
+ ecmd->speed = phydev->speed;
+ ecmd->duplex = phydev->duplex;
+ }
+
+ ecmd->phy_address = adapter->phy_mdio_addr;
+
+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_LPA);
+ if (phyreg & LPA_10HALF)
+ ecmd->lp_advertising |= ADVERTISED_10baseT_Half;
+
+ if (phyreg & LPA_10FULL)
+ ecmd->lp_advertising |= ADVERTISED_10baseT_Full;
+
+ if (phyreg & LPA_100HALF)
+ ecmd->lp_advertising |= ADVERTISED_100baseT_Half;
+
+ if (phyreg & LPA_100FULL)
+ ecmd->lp_advertising |= ADVERTISED_100baseT_Full;
+
+ phyreg = (uint16_t)phy_read(adapter->phydev, MII_STAT1000);
+ if (phyreg & LPA_1000HALF)
+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Half;
+
+ if (phyreg & LPA_1000FULL)
+ ecmd->lp_advertising |= ADVERTISED_1000baseT_Full;
+ } else {
+ /* If the speed/duplex for this GMAC is forced and we
+ * are not polling for link state changes, return the
+ * values as specified by platform. This will be true
+ * for GMACs connected to switch, and interfaces that
+ * do not use a PHY.
+ */
+ if (!(adapter->poll_required)) {
+ if (adapter->forced_speed != SPEED_UNKNOWN) {
+ /* set speed and duplex */
+ ethtool_cmd_speed_set(ecmd, SPEED_1000);
+ ecmd->duplex = DUPLEX_FULL;
+
+ /* Populate capabilities advertised by self */
+ ecmd->advertising = 0;
+ ecmd->autoneg = 0;
+ ecmd->port = PORT_TP;
+ ecmd->transceiver = XCVR_EXTERNAL;
+ } else {
+ /* non link polled and non
+ * forced speed/duplex interface
+ */
+ return -EIO;
+ }
+ }
+ }
+
+ return 0;
+}
+
+/* edma_set_settings()
+ * Set EDMA settings
+ */
+static int edma_set_settings(struct net_device *netdev,
+ struct ethtool_cmd *ecmd)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+ struct phy_device *phydev = NULL;
+
+ if ((adapter->forced_speed != SPEED_UNKNOWN) &&
+ !adapter->poll_required)
+ return -EPERM;
+
+ phydev = adapter->phydev;
+ phydev->advertising = ecmd->advertising;
+ phydev->autoneg = ecmd->autoneg;
+ phydev->speed = ethtool_cmd_speed(ecmd);
+ phydev->duplex = ecmd->duplex;
+
+ genphy_config_aneg(phydev);
+
+ return 0;
+}
+
+/* edma_get_coalesce
+ * get interrupt mitigation
+ */
+static int edma_get_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ u32 reg_val;
+
+ edma_get_tx_rx_coalesce(&reg_val);
+
+ /* We read the Interrupt Moderation Timer(IMT) register value,
+ * use lower 16 bit for rx and higher 16 bit for Tx. We do a
+ * left shift by 1, because IMT resolution timer is 2usecs.
+ * Hence the value given by the register is multiplied by 2 to
+ * get the actual time in usecs.
+ */
+ ec->tx_coalesce_usecs = (((reg_val >> 16) & 0xffff) << 1);
+ ec->rx_coalesce_usecs = ((reg_val & 0xffff) << 1);
+
+ return 0;
+}
+
+/* edma_set_coalesce
+ * set interrupt mitigation
+ */
+static int edma_set_coalesce(struct net_device *netdev,
+ struct ethtool_coalesce *ec)
+{
+ if (ec->tx_coalesce_usecs)
+ edma_change_tx_coalesce(ec->tx_coalesce_usecs);
+ if (ec->rx_coalesce_usecs)
+ edma_change_rx_coalesce(ec->rx_coalesce_usecs);
+
+ return 0;
+}
+
+/* edma_set_priv_flags()
+ * Set EDMA private flags
+ */
+static int edma_set_priv_flags(struct net_device *netdev, u32 flags)
+{
+ return 0;
+}
+
+/* edma_get_priv_flags()
+ * get edma driver flags
+ */
+static u32 edma_get_priv_flags(struct net_device *netdev)
+{
+ return 0;
+}
+
+/* edma_get_ringparam()
+ * get ring size
+ */
+static void edma_get_ringparam(struct net_device *netdev,
+ struct ethtool_ringparam *ring)
+{
+ struct edma_adapter *adapter = netdev_priv(netdev);
+ struct edma_common_info *edma_cinfo = adapter->edma_cinfo;
+
+ ring->tx_max_pending = edma_cinfo->tx_ring_count;
+ ring->rx_max_pending = edma_cinfo->rx_ring_count;
+}
+
+/* Ethtool operations
+ */
+static const struct ethtool_ops edma_ethtool_ops = {
+ .get_drvinfo = &edma_get_drvinfo,
+ .get_link = &ethtool_op_get_link,
+ .get_msglevel = &edma_get_msglevel,
+ .nway_reset = &edma_nway_reset,
+ .get_wol = &edma_get_wol,
+ .get_settings = &edma_get_settings,
+ .set_settings = &edma_set_settings,
+ .get_strings = &edma_get_strings,
+ .get_sset_count = &edma_get_strset_count,
+ .get_ethtool_stats = &edma_get_ethtool_stats,
+ .get_coalesce = &edma_get_coalesce,
+ .set_coalesce = &edma_set_coalesce,
+ .get_priv_flags = edma_get_priv_flags,
+ .set_priv_flags = edma_set_priv_flags,
+ .get_ringparam = edma_get_ringparam,
+};
+
+/* edma_set_ethtool_ops
+ * Set ethtool operations
+ */
+void edma_set_ethtool_ops(struct net_device *netdev)
+{
+ netdev->ethtool_ops = &edma_ethtool_ops;
+}
--- /dev/null
+++ b/drivers/net/ethernet/qualcomm/essedma/ess_edma.h
@@ -0,0 +1,332 @@
+/*
+ * Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for
+ * any purpose with or without fee is hereby granted, provided that the
+ * above copyright notice and this permission notice appear in all copies.
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef _ESS_EDMA_H_
+#define _ESS_EDMA_H_
+
+#include <linux/types.h>
+
+struct edma_adapter;
+struct edma_hw;
+
+/* register definition */
+#define EDMA_REG_MAS_CTRL 0x0
+#define EDMA_REG_TIMEOUT_CTRL 0x004
+#define EDMA_REG_DBG0 0x008
+#define EDMA_REG_DBG1 0x00C
+#define EDMA_REG_SW_CTRL0 0x100
+#define EDMA_REG_SW_CTRL1 0x104
+
+/* Interrupt Status Register */
+#define EDMA_REG_RX_ISR 0x200
+#define EDMA_REG_TX_ISR 0x208
+#define EDMA_REG_MISC_ISR 0x210
+#define EDMA_REG_WOL_ISR 0x218
+
+#define EDMA_MISC_ISR_RX_URG_Q(x) (1 << x)
+
+#define EDMA_MISC_ISR_AXIR_TIMEOUT 0x00000100
+#define EDMA_MISC_ISR_AXIR_ERR 0x00000200
+#define EDMA_MISC_ISR_TXF_DEAD 0x00000400
+#define EDMA_MISC_ISR_AXIW_ERR 0x00000800
+#define EDMA_MISC_ISR_AXIW_TIMEOUT 0x00001000
+
+#define EDMA_WOL_ISR 0x00000001
+
+/* Interrupt Mask Register */
+#define EDMA_REG_MISC_IMR 0x214
+#define EDMA_REG_WOL_IMR 0x218
+
+#define EDMA_RX_IMR_NORMAL_MASK 0x1
+#define EDMA_TX_IMR_NORMAL_MASK 0x1
+#define EDMA_MISC_IMR_NORMAL_MASK 0x80001FFF
+#define EDMA_WOL_IMR_NORMAL_MASK 0x1
+
+/* Edma receive consumer index */
+#define EDMA_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */
+/* Edma transmit consumer index */
+#define EDMA_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */
+
+/* IRQ Moderator Initial Timer Register */
+#define EDMA_REG_IRQ_MODRT_TIMER_INIT 0x280
+#define EDMA_IRQ_MODRT_TIMER_MASK 0xFFFF
+#define EDMA_IRQ_MODRT_RX_TIMER_SHIFT 0
+#define EDMA_IRQ_MODRT_TX_TIMER_SHIFT 16
+
+/* Interrupt Control Register */
+#define EDMA_REG_INTR_CTRL 0x284
+#define EDMA_INTR_CLR_TYP_SHIFT 0
+#define EDMA_INTR_SW_IDX_W_TYP_SHIFT 1
+#define EDMA_INTR_CLEAR_TYPE_W1 0
+#define EDMA_INTR_CLEAR_TYPE_R 1
+
+/* RX Interrupt Mask Register */
+#define EDMA_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */
+
+/* TX Interrupt mask register */
+#define EDMA_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */
+
+/* Load Ptr Register
+ * Software sets this bit after the initialization of the head and tail
+ */
+#define EDMA_REG_TX_SRAM_PART 0x400
+#define EDMA_LOAD_PTR_SHIFT 16
+
+/* TXQ Control Register */
+#define EDMA_REG_TXQ_CTRL 0x404
+#define EDMA_TXQ_CTRL_IP_OPTION_EN 0x10
+#define EDMA_TXQ_CTRL_TXQ_EN 0x20
+#define EDMA_TXQ_CTRL_ENH_MODE 0x40
+#define EDMA_TXQ_CTRL_LS_8023_EN 0x80
+#define EDMA_TXQ_CTRL_TPD_BURST_EN 0x100
+#define EDMA_TXQ_CTRL_LSO_BREAK_EN 0x200
+#define EDMA_TXQ_NUM_TPD_BURST_MASK 0xF
+#define EDMA_TXQ_TXF_BURST_NUM_MASK 0xFFFF
+#define EDMA_TXQ_NUM_TPD_BURST_SHIFT 0
+#define EDMA_TXQ_TXF_BURST_NUM_SHIFT 16
+
+#define EDMA_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */
+#define EDMA_TXF_WATER_MARK_MASK 0x0FFF
+#define EDMA_TXF_LOW_WATER_MARK_SHIFT 0
+#define EDMA_TXF_HIGH_WATER_MARK_SHIFT 16
+#define EDMA_TXQ_CTRL_BURST_MODE_EN 0x80000000
+
+/* WRR Control Register */
+#define EDMA_REG_WRR_CTRL_Q0_Q3 0x40c
+#define EDMA_REG_WRR_CTRL_Q4_Q7 0x410
+#define EDMA_REG_WRR_CTRL_Q8_Q11 0x414
+#define EDMA_REG_WRR_CTRL_Q12_Q15 0x418
+
+/* Weight round robin(WRR), it takes queue as input, and computes
+ * starting bits where we need to write the weight for a particular
+ * queue
+ */
+#define EDMA_WRR_SHIFT(x) (((x) * 5) % 20)
+
+/* Tx Descriptor Control Register */
+#define EDMA_REG_TPD_RING_SIZE 0x41C
+#define EDMA_TPD_RING_SIZE_SHIFT 0
+#define EDMA_TPD_RING_SIZE_MASK 0xFFFF
+
+/* Transmit descriptor base address */
+#define EDMA_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */
+
+/* TPD Index Register */
+#define EDMA_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */
+
+#define EDMA_TPD_PROD_IDX_BITS 0x0000FFFF
+#define EDMA_TPD_CONS_IDX_BITS 0xFFFF0000
+#define EDMA_TPD_PROD_IDX_MASK 0xFFFF
+#define EDMA_TPD_CONS_IDX_MASK 0xFFFF
+#define EDMA_TPD_PROD_IDX_SHIFT 0
+#define EDMA_TPD_CONS_IDX_SHIFT 16
+
+/* TX Virtual Queue Mapping Control Register */
+#define EDMA_REG_VQ_CTRL0 0x4A0
+#define EDMA_REG_VQ_CTRL1 0x4A4
+
+/* Virtual QID shift, it takes queue as input, and computes
+ * Virtual QID position in virtual qid control register
+ */
+#define EDMA_VQ_ID_SHIFT(i) (((i) * 3) % 24)
+
+/* Virtual Queue Default Value */
+#define EDMA_VQ_REG_VALUE 0x240240
+
+/* Tx side Port Interface Control Register */
+#define EDMA_REG_PORT_CTRL 0x4A8
+#define EDMA_PAD_EN_SHIFT 15
+
+/* Tx side VLAN Configuration Register */
+#define EDMA_REG_VLAN_CFG 0x4AC
+
+#define EDMA_TX_CVLAN 16
+#define EDMA_TX_INS_CVLAN 17
+#define EDMA_TX_CVLAN_TAG_SHIFT 0
+
+#define EDMA_TX_SVLAN 14
+#define EDMA_TX_INS_SVLAN 15
+#define EDMA_TX_SVLAN_TAG_SHIFT 16
+
+/* Tx Queue Packet Statistic Register */
+#define EDMA_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */
+
+#define EDMA_TX_STAT_PKT_MASK 0xFFFFFF
+
+/* Tx Queue Byte Statistic Register */
+#define EDMA_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */
+
+/* Load Balance Based Ring Offset Register */
+#define EDMA_REG_LB_RING 0x800
+#define EDMA_LB_RING_ENTRY_MASK 0xff
+#define EDMA_LB_RING_ID_MASK 0x7
+#define EDMA_LB_RING_PROFILE_ID_MASK 0x3
+#define EDMA_LB_RING_ENTRY_BIT_OFFSET 8
+#define EDMA_LB_RING_ID_OFFSET 0
+#define EDMA_LB_RING_PROFILE_ID_OFFSET 3
+#define EDMA_LB_REG_VALUE 0x6040200
+
+/* Load Balance Priority Mapping Register */
+#define EDMA_REG_LB_PRI_START 0x804
+#define EDMA_REG_LB_PRI_END 0x810
+#define EDMA_LB_PRI_REG_INC 4
+#define EDMA_LB_PRI_ENTRY_BIT_OFFSET 4
+#define EDMA_LB_PRI_ENTRY_MASK 0xf
+
+/* RSS Priority Mapping Register */
+#define EDMA_REG_RSS_PRI 0x820
+#define EDMA_RSS_PRI_ENTRY_MASK 0xf
+#define EDMA_RSS_RING_ID_MASK 0x7
+#define EDMA_RSS_PRI_ENTRY_BIT_OFFSET 4
+
+/* RSS Indirection Register */
+#define EDMA_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */
+#define EDMA_NUM_IDT 16
+#define EDMA_RSS_IDT_VALUE 0x64206420
+
+/* Default RSS Ring Register */
+#define EDMA_REG_DEF_RSS 0x890
+#define EDMA_DEF_RSS_MASK 0x7
+
+/* RSS Hash Function Type Register */
+#define EDMA_REG_RSS_TYPE 0x894
+#define EDMA_RSS_TYPE_NONE 0x01
+#define EDMA_RSS_TYPE_IPV4TCP 0x02
+#define EDMA_RSS_TYPE_IPV6_TCP 0x04
+#define EDMA_RSS_TYPE_IPV4_UDP 0x08
+#define EDMA_RSS_TYPE_IPV6UDP 0x10
+#define EDMA_RSS_TYPE_IPV4 0x20
+#define EDMA_RSS_TYPE_IPV6 0x40
+#define EDMA_RSS_HASH_MODE_MASK 0x7f
+
+#define EDMA_REG_RSS_HASH_VALUE 0x8C0
+
+#define EDMA_REG_RSS_TYPE_RESULT 0x8C4
+
+#define EDMA_HASH_TYPE_START 0
+#define EDMA_HASH_TYPE_END 5
+#define EDMA_HASH_TYPE_SHIFT 12
+
+#define EDMA_RFS_FLOW_ENTRIES 1024
+#define EDMA_RFS_FLOW_ENTRIES_MASK (EDMA_RFS_FLOW_ENTRIES - 1)
+#define EDMA_RFS_EXPIRE_COUNT_PER_CALL 128
+
+/* RFD Base Address Register */
+#define EDMA_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */
+
+/* RFD Index Register */
+#define EDMA_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2))
+
+#define EDMA_RFD_PROD_IDX_BITS 0x00000FFF
+#define EDMA_RFD_CONS_IDX_BITS 0x0FFF0000
+#define EDMA_RFD_PROD_IDX_MASK 0xFFF
+#define EDMA_RFD_CONS_IDX_MASK 0xFFF
+#define EDMA_RFD_PROD_IDX_SHIFT 0
+#define EDMA_RFD_CONS_IDX_SHIFT 16
+
+/* Rx Descriptor Control Register */
+#define EDMA_REG_RX_DESC0 0xA10
+#define EDMA_RFD_RING_SIZE_MASK 0xFFF
+#define EDMA_RX_BUF_SIZE_MASK 0xFFFF
+#define EDMA_RFD_RING_SIZE_SHIFT 0
+#define EDMA_RX_BUF_SIZE_SHIFT 16
+
+#define EDMA_REG_RX_DESC1 0xA14
+#define EDMA_RXQ_RFD_BURST_NUM_MASK 0x3F
+#define EDMA_RXQ_RFD_PF_THRESH_MASK 0x1F
+#define EDMA_RXQ_RFD_LOW_THRESH_MASK 0xFFF
+#define EDMA_RXQ_RFD_BURST_NUM_SHIFT 0
+#define EDMA_RXQ_RFD_PF_THRESH_SHIFT 8
+#define EDMA_RXQ_RFD_LOW_THRESH_SHIFT 16
+
+/* RXQ Control Register */
+#define EDMA_REG_RXQ_CTRL 0xA18
+#define EDMA_FIFO_THRESH_TYPE_SHIF 0
+#define EDMA_FIFO_THRESH_128_BYTE 0x0
+#define EDMA_FIFO_THRESH_64_BYTE 0x1
+#define EDMA_RXQ_CTRL_RMV_VLAN 0x00000002
+#define EDMA_RXQ_CTRL_EN 0x0000FF00
+
+/* AXI Burst Size Config */
+#define EDMA_REG_AXIW_CTRL_MAXWRSIZE 0xA1C
+#define EDMA_AXIW_MAXWRSIZE_VALUE 0x0
+
+/* Rx Statistics Register */
+#define EDMA_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */
+#define EDMA_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */
+
+/* WoL Pattern Length Register */
+#define EDMA_REG_WOL_PATTERN_LEN0 0xC00
+#define EDMA_WOL_PT_LEN_MASK 0xFF
+#define EDMA_WOL_PT0_LEN_SHIFT 0
+#define EDMA_WOL_PT1_LEN_SHIFT 8
+#define EDMA_WOL_PT2_LEN_SHIFT 16
+#define EDMA_WOL_PT3_LEN_SHIFT 24
+
+#define EDMA_REG_WOL_PATTERN_LEN1 0xC04
+#define EDMA_WOL_PT4_LEN_SHIFT 0
+#define EDMA_WOL_PT5_LEN_SHIFT 8
+#define EDMA_WOL_PT6_LEN_SHIFT 16
+
+/* WoL Control Register */
+#define EDMA_REG_WOL_CTRL 0xC08
+#define EDMA_WOL_WK_EN 0x00000001
+#define EDMA_WOL_MG_EN 0x00000002
+#define EDMA_WOL_PT0_EN 0x00000004
+#define EDMA_WOL_PT1_EN 0x00000008
+#define EDMA_WOL_PT2_EN 0x00000010
+#define EDMA_WOL_PT3_EN 0x00000020
+#define EDMA_WOL_PT4_EN 0x00000040
+#define EDMA_WOL_PT5_EN 0x00000080
+#define EDMA_WOL_PT6_EN 0x00000100
+
+/* MAC Control Register */
+#define EDMA_REG_MAC_CTRL0 0xC20
+#define EDMA_REG_MAC_CTRL1 0xC24
+
+/* WoL Pattern Register */
+#define EDMA_REG_WOL_PATTERN_START 0x5000
+#define EDMA_PATTERN_PART_REG_OFFSET 0x40
+
+
+/* TX descriptor fields */
+#define EDMA_TPD_HDR_SHIFT 0
+#define EDMA_TPD_PPPOE_EN 0x00000100
+#define EDMA_TPD_IP_CSUM_EN 0x00000200
+#define EDMA_TPD_TCP_CSUM_EN 0x0000400
+#define EDMA_TPD_UDP_CSUM_EN 0x00000800
+#define EDMA_TPD_CUSTOM_CSUM_EN 0x00000C00
+#define EDMA_TPD_LSO_EN 0x00001000
+#define EDMA_TPD_LSO_V2_EN 0x00002000
+#define EDMA_TPD_IPV4_EN 0x00010000
+#define EDMA_TPD_MSS_MASK 0x1FFF
+#define EDMA_TPD_MSS_SHIFT 18
+#define EDMA_TPD_CUSTOM_CSUM_SHIFT 18
+
+/* RRD descriptor fields */
+#define EDMA_RRD_NUM_RFD_MASK 0x000F
+#define EDMA_RRD_SVLAN 0x8000
+#define EDMA_RRD_FLOW_COOKIE_MASK 0x07FF;
+
+#define EDMA_RRD_PKT_SIZE_MASK 0x3FFF
+#define EDMA_RRD_CSUM_FAIL_MASK 0xC000
+#define EDMA_RRD_CVLAN 0x0001
+#define EDMA_RRD_DESC_VALID 0x8000
+
+#define EDMA_RRD_PRIORITY_SHIFT 4
+#define EDMA_RRD_PRIORITY_MASK 0x7
+#define EDMA_RRD_PORT_TYPE_SHIFT 7
+#define EDMA_RRD_PORT_TYPE_MASK 0x1F
+#endif /* _ESS_EDMA_H_ */