No description
Find a file
Gabor Juhos c0d4cb1f24 Fix broken i2c module loading in R17269
Strip .ko suffix from module name.

Fix typo in name of i2c-scx200-acb module to be loaded.

Steve

Signed-off-by: Steve Brown <sbrown@cortland.com>

SVN-Revision: 17288
2009-08-16 12:39:47 +00:00
docs configure the IPv6 from /etc/config/network and remove 6scripts's prefix option to set an IPv6 address on the LAN (#5450) 2009-07-05 11:17:49 +00:00
include add menuconfig option for selecting initramfs compression 2009-08-16 05:35:34 +00:00
package Fix broken i2c module loading in R17269 2009-08-16 12:39:47 +00:00
scripts Workaround a bug(?) in tar in debian squeeze, which causes the build process to fail without any reason. 2009-06-08 21:17:58 +00:00
target bump to 2.6.30.4, apply fix from [15119] to x86_64 2009-08-16 10:18:07 +00:00
toolchain add gcc 4.3.4 2009-08-07 12:00:25 +00:00
tools add support for the Pirelli AG226G board (#5337) 2009-08-09 10:19:47 +00:00
.gitignore add logs/ to .gitignore 2009-04-24 01:04:57 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in add menuconfig option for selecting initramfs compression 2009-08-16 05:35:34 +00:00
feeds.conf.default switch to LuCI 0.9.x branch 2009-06-10 23:55:19 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile add a "make prepare" target which builds everything up to target/compile, useful for scripts/deptest.sh 2009-05-28 18:40:37 +00:00
README change readme to point to scripts/flashing/flash.sh instead of scripts/flash.sh 2008-12-31 14:52:23 +00:00
rules.mk add a staging directory for unstripped package files, useful for debugging, will be used for mklibs integration later 2009-08-07 21:58:35 +00:00

This is the buildsystem for the OpenWrt Linux distribution

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex, bison,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Simply running 'make' will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use scripts/flashing/flash.sh for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type make -C docs/ to build it.

Building your own firmware you need to have access to a Linux, BSD or MacOSX system.
Cygwin will not be supported because of the lack of case sensitiveness.

Sunshine!
	Your OpenWrt Project
	http://openwrt.org