1422d4435b
The deleted patches are already integrated in the upstream U-Boot version. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
69 lines
3 KiB
Diff
69 lines
3 KiB
Diff
From b2b385df5095fff80b4655142f58a2a6801e6c80 Mon Sep 17 00:00:00 2001
|
|
From: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
|
|
Date: Tue, 6 Jan 2015 21:26:44 +0100
|
|
Subject: sun6i: Fix and document PLL LDO voltage selection
|
|
|
|
The PRCM_PLL_CTRL_LDO_OUT_L and PRCM_PLL_CTRL_LDO_OUT_H macros had
|
|
their meaning reversed. This is fixed by this change-set. With this
|
|
changed, the PRCM_PLL_CTRL_LDO_OUT_L(1370) now becomes self-evident
|
|
as setting the voltage to 1.37v (which it had done all along, even
|
|
though stating a different target voltage).
|
|
|
|
After changing the PLL LDO setting, it will take a little while for
|
|
the voltage output to settle. A sdelay()-based loop waits the same
|
|
order of magnitude as Boot1.
|
|
|
|
Furthermore, a bit of documentation is added to clarify that the
|
|
required setting for the PLL LDO is 1.37v as per the A31 manual.
|
|
|
|
--- a/arch/arm/mach-sunxi/clock_sun6i.c
|
|
+++ b/arch/arm/mach-sunxi/clock_sun6i.c
|
|
@@ -26,13 +26,26 @@ void clock_init_safe(void)
|
|
struct sunxi_prcm_reg * const prcm =
|
|
(struct sunxi_prcm_reg *)SUNXI_PRCM_BASE;
|
|
|
|
- /* Set PLL ldo voltage without this PLL6 does not work properly */
|
|
+ /* Set PLL ldo voltage without this PLL6 does not work properly.
|
|
+ *
|
|
+ * As the A31 manual states, that "before enable PLL, PLLVDD
|
|
+ * LDO should be set to 1.37v", we need to configure this to 2.5v
|
|
+ * in the "PLL Input Power Select" (0 << 15) and (7 << 16).
|
|
+ */
|
|
clrsetbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK,
|
|
PRCM_PLL_CTRL_LDO_KEY);
|
|
clrsetbits_le32(&prcm->pll_ctrl1, ~PRCM_PLL_CTRL_LDO_KEY_MASK,
|
|
PRCM_PLL_CTRL_LDO_DIGITAL_EN | PRCM_PLL_CTRL_LDO_ANALOG_EN |
|
|
- PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1140));
|
|
+ PRCM_PLL_CTRL_EXT_OSC_EN | PRCM_PLL_CTRL_LDO_OUT_L(1370));
|
|
clrbits_le32(&prcm->pll_ctrl1, PRCM_PLL_CTRL_LDO_KEY_MASK);
|
|
+
|
|
+ /* Give the PLL LDO voltage setting some time to take hold.
|
|
+ * Notes:
|
|
+ * 1) We need to use sdelay() as the timers aren't set up yet.
|
|
+ * 2) The 100k iterations come from Boot1, which spin's for 100k
|
|
+ * iterations through a loop.
|
|
+ */
|
|
+ sdelay(100000);
|
|
#endif
|
|
|
|
#if defined(CONFIG_MACH_SUN8I_R40) || defined(CONFIG_MACH_SUN50I)
|
|
--- a/arch/arm/include/asm/arch-sunxi/prcm.h
|
|
+++ b/arch/arm/include/asm/arch-sunxi/prcm.h
|
|
@@ -111,13 +111,13 @@
|
|
#define PRCM_PLL_CTRL_LDO_OUT_MASK \
|
|
__PRCM_PLL_CTRL_LDO_OUT(0x7)
|
|
/* When using the low voltage 20 mV steps, and high voltage 30 mV steps */
|
|
-#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
|
|
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_H(n) \
|
|
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1000) / 20) & 0x7)
|
|
+#define PRCM_PLL_CTRL_LDO_OUT_L(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) - 1160) / 30) & 0x7)
|
|
-#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
|
|
- __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
|
|
#define PRCM_PLL_CTRL_LDO_OUT_HV(n) \
|
|
+ __PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 20) + 1000)
|
|
+#define PRCM_PLL_CTRL_LDO_OUT_LV(n) \
|
|
__PRCM_PLL_CTRL_VDD_LDO_OUT((((n) & 0x7) * 30) + 1160)
|
|
#define PRCM_PLL_CTRL_LDO_KEY (0xa7 << 24)
|
|
#define PRCM_PLL_CTRL_LDO_KEY_MASK (0xff << 24)
|