openwrtv3/target/linux/lantiq/dts/WBMR.dts
Mathias Kresin 2b55c83e68 treewide: dts: use keycode defines from input dt-binding
All compiled device tree files not mentioned are binary identical to the
former ones.

Fix the obvious decimal/hex confusion for the power key of ramips/M2M.dts.

Due to the include of the input binding header, the BTN_* node names in:

  - ramips/GL-MT300A.dts
  - ramips/GL-MT300N.dts
  - ramips/GL-MT750.dts
  - ramips/Timecloud.dts

will be changed by the compiler to the numerical equivalent.

Move the binding include of lantiq boards to the file where they are
used the first time to hint the user where the values do come from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-13 07:07:58 +01:00

184 lines
3.3 KiB
Text

/dts-v1/;
#include "ar9.dtsi"
#include <dt-bindings/input/input.h>
/ {
model = "WBMR - Buffalo WBMR-HP-G300H";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &dsl;
led-internet = &online_green;
led-usb = &usb;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x4000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x40000>;
read-only;
};
partition@40000 {
label = "uboot_env";
reg = <0x40000 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x60000 0x1f20000>;
};
boardconfig: partition@1fc0000 {
label = "board";
reg = <0x1fc0000 0x20000>;
read-only;
};
partition@1fe0000 {
label = "calibration";
reg = <0x1fe0000 0x20000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
etop@E180000 {
phy-mode = "rgmii";
mtd-mac-address = <&boardconfig 0x10024>;
};
ifxhcd@E101000 {
status = "okay";
gpios = <&gpio 36 GPIO_ACTIVE_HIGH>;
};
pci@E105400 {
status = "okay";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
reset {
label = "reset";
gpios = <&gpio 37 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
eject {
label = "eject";
gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RFKILL>;
};
movie {
label = "movie";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
linux,code = <BTN_9>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "wbmr:green:power";
gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
};
power_red: power2 {
label = "wbmr:red:power";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
security {
label = "wbmr:yellow:security";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "wbmr:green:wireless";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
};
dsl: dsl {
label = "wbmr:green:dsl";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
};
online_green: online {
label = "wbmr:green:internet";
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
online2 {
label = "wbmr:red:internet";
gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
};
movie {
label = "wbmr:blue:movie";
gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
};
usb: usb {
label = "wbmr:green:usb";
gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
default-state = "on";
};
};
};