openwrtv3/target/linux/ramips/dts/WIDORA-NEO.dts
L. D. Pinney 70b192f573 ramips: update device tree source files
Use the GPIO dt-bindings macros and add compatible strings in the
ramips device tree source files.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-08-03 19:37:40 +02:00

171 lines
2.4 KiB
Text

/dts-v1/;
#include "mt7628an.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "widora,neo", "mediatek,mt7628an-soc";
model = "Widora-NEO";
chosen {
bootargs = "console=ttyS0,115200";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
gpio-leds {
compatible = "gpio-leds";
wifi {
label = "widora:orange:wifi";
gpios = <&wgpio 0 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "reset";
gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
wgpio: gpio-wifi {
compatible = "mediatek,gpio-wifi";
#address-cells = <1>;
#size-cells = <0>;
gpio-controller;
#gpio-cells = <2>;
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "gpio";
ralink,function = "gpio";
};
perst {
ralink,group = "perst";
ralink,function = "gpio";
};
refclk {
ralink,group = "refclk";
ralink,function = "gpio";
};
i2s {
ralink,group = "i2s";
ralink,function = "gpio";
};
spis {
ralink,group = "spis";
ralink,function = "gpio";
};
wled_kn {
ralink,group = "wled_kn";
ralink,function = "gpio";
};
wled_an {
ralink,group = "wled_an";
ralink,function = "wled_an";
};
wdt {
ralink,group = "wdt";
ralink,function = "gpio";
};
};
};
&spi0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&spi_pins>, <&spi_cs1_pins>;
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <40000000>;
m25p,chunked-io = <31>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x0fb0000>;
};
};
spidev@1 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "linux,spidev";
reg = <1>;
spi-max-frequency = <40000000>;
};
};
&i2c {
status = "okay";
};
&uart1 {
status = "okay";
};
&uart2 {
status = "okay";
};
&pwm {
status = "okay";
};
&ethernet {
mtd-mac-address = <&factory 0x28>;
};
&sdhci {
status = "okay";
mediatek,cd-low;
};
&wmac {
status = "okay";
};