openwrtv3/target/linux/ramips
INAGAKI Hiroshi 189815462c ramips: add support for ELECOM WRC-1167GHBK2-S
ELECOM WRC-1167GHBK2-S is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7621A.

Specification:

- MT7621A (2-Cores, 4-Threads)
- 128 MB of RAM (DDR3)
- 16 MB of Flash (SPI)
- 2T2R 2.4/5 GHz
  - MediaTek MT7615D
- 5x 10/100/1000 Mbps Ethernet
- 6x LEDs, 2x keys
- UART header on PCB
  - Vcc, GND, TX, RX from ethernet port side
  - baudrate: 57600 bps

Flash instruction using factory image:

1. Rename the factory image to "wrc-1167ghbk2-s_v0.00.bin"
2. Connect the computer to the LAN port of WRC-1167GHBK2-S
3. Connect power cable to WRC-1167GHBK2-S and turn on it
4. Access to "http://192.168.2.1/details.html" and open firmware
update page ("手動更新(アップデート)")
5. Select the factory image and click apply ("適用") button
6. Wait ~150 seconds to complete flashing

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
2018-06-19 20:46:21 +02:00
..
base-files ramips: add support for ELECOM WRC-1167GHBK2-S 2018-06-19 20:46:21 +02:00
dts ramips: add support for ELECOM WRC-1167GHBK2-S 2018-06-19 20:46:21 +02:00
files-4.14/drivers ramips: improve ethernet driver performance with GRO/TSO 2018-06-19 09:45:28 +02:00
image ramips: add support for ELECOM WRC-1167GHBK2-S 2018-06-19 20:46:21 +02:00
mt76x8 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
mt7620 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
mt7621 ramips: mir3g dts define usb port Vcc volt regulator GPIO 2018-06-08 09:31:36 +02:00
patches-4.14 kernel: bump 4.14 to 4.14.49 2018-06-18 07:10:19 +02:00
rt288x kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
rt305x ramips: add dwr-512 jboot firmware configuration 2018-04-08 09:51:06 +02:00
rt3883 kernel: enable THIN_ARCHIVES by default 2018-05-22 07:55:20 +02:00
Makefile ramips: switch to linux 4.14 2018-04-06 18:07:43 +02:00
modules.mk ramips: rename pwm kernel module 2018-04-08 12:35:33 +02:00