openwrtv3/target/linux/ramips/image
Francois Goudal 9b35815f0f ramips: add support for Afoundry EW-1200
This device features both a 2.4 and 5Ghz radio, and supports
802.11a/b/g/n/ac modes.
It has 5 Gb-Ethernet ports and a USB 3.0 host port.

It is powered by the Mediatek MT7621 SoC, and the MT7602E and MT7612E wifi
chipsets, together with 128MB of RAM and 16 MB of SPI Flash.

The stock firmware is in fact based on some openwrt barrier breaker, with a
mediatek SDK kernel, and an afoundry custom made web interface (not LuCI
based).
Firmware update page on the stock web interface can not accept sysupgrade
images, it bricks the device.
At this point, the only working solution I found was to connect to the
serial console port (available on J4 header) and to use opkg to install
dropbear.
Then scp the sysupgrade file in the device's /tmp and run sysupgrade from
console without preserving configuration files.

Signed-off-by: Francois Goudal <francois@goudal.net>
2017-03-01 22:29:50 +01:00
..
lzma-loader ramips: lzma-loader: fix O32 ABI conformance 2016-03-21 13:15:29 +00:00
Makefile ramips: Introduce CONFIG_MIPS_APPENDED_RAW_DTB to F5D8235 V1 (rt288x) 2017-02-02 00:13:49 +01:00
mt7620.mk ramips: include only kmod-mt76-core in EX2700 image 2017-02-26 10:26:50 +01:00
mt7621.mk ramips: add support for Afoundry EW-1200 2017-03-01 22:29:50 +01:00
mt7628.mk ramips: add support for HiWiFi HC5661A 2017-02-27 11:39:31 +01:00
mt7688.mk ramips: Added Onion Omega2 and Omega2+ 2017-01-15 17:43:14 +01:00
rt288x.mk ramips: fix AR670W partition alignment 2017-02-09 09:14:45 +01:00
rt305x-legacy.mk ramips: use new image build code for more devices 2016-12-24 10:03:38 +01:00
rt305x.mk ramips: added image size into dwr-512 DT 2017-02-13 10:24:32 +01:00
rt3883.mk ramips: use new image build code for more devices 2016-12-24 10:03:38 +01:00