openwrtv3/package/kernel/linux/modules/block.mk
Felix Fietkau c38b7b3913 kernel: make libsas depend on x86
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37254
2013-07-11 20:56:22 +00:00

607 lines
14 KiB
Makefile

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
BLOCK_MENU:=Block Devices
define KernelPackage/aoe
SUBMENU:=$(BLOCK_MENU)
TITLE:=ATA over Ethernet support
KCONFIG:=CONFIG_ATA_OVER_ETH
FILES:=$(LINUX_DIR)/drivers/block/aoe/aoe.ko
AUTOLOAD:=$(call AutoLoad,30,aoe)
endef
define KernelPackage/aoe/description
Kernel support for ATA over Ethernet
endef
$(eval $(call KernelPackage,aoe))
define KernelPackage/ata-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=Serial and Parallel ATA support
DEPENDS:=@PCI_SUPPORT +kmod-scsi-core
KCONFIG:=CONFIG_ATA
FILES:=$(LINUX_DIR)/drivers/ata/libata.ko
AUTOLOAD:=$(call AutoLoad,21,libata,1)
endef
$(eval $(call KernelPackage,ata-core))
define AddDepends/ata
SUBMENU:=$(BLOCK_MENU)
DEPENDS+=kmod-ata-core $(1)
endef
define KernelPackage/ata-ahci
TITLE:=AHCI Serial ATA support
KCONFIG:=CONFIG_SATA_AHCI
FILES:= \
$(LINUX_DIR)/drivers/ata/ahci.ko \
$(LINUX_DIR)/drivers/ata/libahci.ko
AUTOLOAD:=$(call AutoLoad,41,libahci ahci,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-ahci/description
Support for AHCI Serial ATA controllers.
endef
$(eval $(call KernelPackage,ata-ahci))
define KernelPackage/ata-artop
TITLE:=ARTOP 6210/6260 PATA support
KCONFIG:=CONFIG_PATA_ARTOP
FILES:=$(LINUX_DIR)/drivers/ata/pata_artop.ko
AUTOLOAD:=$(call AutoLoad,41,pata_artop,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-artop/description
PATA support for ARTOP 6210/6260 host controllers.
endef
$(eval $(call KernelPackage,ata-artop))
define KernelPackage/ata-marvell-sata
TITLE:=Marvell Serial ATA support
KCONFIG:=CONFIG_SATA_MV
FILES:=$(LINUX_DIR)/drivers/ata/sata_mv.ko
AUTOLOAD:=$(call AutoLoad,41,sata_mv,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-marvell-sata/description
SATA support for marvell chipsets
endef
$(eval $(call KernelPackage,ata-marvell-sata))
define KernelPackage/ata-nvidia-sata
TITLE:=Nvidia Serial ATA support
KCONFIG:=CONFIG_SATA_NV
FILES:=$(LINUX_DIR)/drivers/ata/sata_nv.ko
AUTOLOAD:=$(call AutoLoad,41,sata_nv,1)
$(call AddDepends/ata)
endef
$(eval $(call KernelPackage,ata-nvidia-sata))
define KernelPackage/ata-pdc202xx-old
SUBMENU:=$(BLOCK_MENU)
TITLE:=Older Promise PATA controller support
DEPENDS:=kmod-ata-core
KCONFIG:= \
CONFIG_ATA_SFF=y \
CONFIG_PATA_PDC_OLD
FILES:=$(LINUX_DIR)/drivers/ata/pata_pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,41,pata_pdc202xx_old,1)
endef
define KernelPackage/ata-pdc202xx-old/description
This option enables support for the Promise 20246, 20262, 20263,
20265 and 20267 adapters.
endef
$(eval $(call KernelPackage,ata-pdc202xx-old))
define KernelPackage/ata-piix
TITLE:=Intel PIIX PATA/SATA support
KCONFIG:=CONFIG_ATA_PIIX
FILES:=$(LINUX_DIR)/drivers/ata/ata_piix.ko
AUTOLOAD:=$(call AutoLoad,41,ata_piix,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-piix/description
SATA support for Intel ICH5/6/7/8 series host controllers and
PATA support for Intel ESB/ICH/PIIX3/PIIX4 series host controllers.
endef
$(eval $(call KernelPackage,ata-piix))
define KernelPackage/ata-sil
TITLE:=Silicon Image SATA support
KCONFIG:=CONFIG_SATA_SIL
FILES:=$(LINUX_DIR)/drivers/ata/sata_sil.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sil/description
Support for Silicon Image Serial ATA controllers.
endef
$(eval $(call KernelPackage,ata-sil))
define KernelPackage/ata-sil24
TITLE:=Silicon Image 3124/3132 SATA support
KCONFIG:=CONFIG_SATA_SIL24
FILES:=$(LINUX_DIR)/drivers/ata/sata_sil24.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sil24,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sil24/description
Support for Silicon Image 3124/3132 Serial ATA controllers.
endef
$(eval $(call KernelPackage,ata-sil24))
define KernelPackage/ata-sis
TITLE:=SIS SATA support
KCONFIG:=CONFIG_SATA_SIS
FILES:=$(LINUX_DIR)/drivers/ata/sata_sis.ko
AUTOLOAD:=$(call AutoLoad,41,sata_sis,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-sis/description
Support for SIS Serial ATA controllers.
endef
$(eval $(call KernelPackage,ata-sis))
define KernelPackage/ata-via-sata
TITLE:=VIA SATA support
KCONFIG:=CONFIG_SATA_VIA
FILES:=$(LINUX_DIR)/drivers/ata/sata_via.ko
AUTOLOAD:=$(call AutoLoad,41,sata_via,1)
$(call AddDepends/ata)
endef
define KernelPackage/ata-via-sata/description
This option enables support for VIA Serial ATA.
endef
$(eval $(call KernelPackage,ata-via-sata))
define KernelPackage/block2mtd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Block device MTD emulation
KCONFIG:=CONFIG_MTD_BLOCK2MTD
FILES:=$(LINUX_DIR)/drivers/mtd/devices/block2mtd.ko
endef
$(eval $(call KernelPackage,block2mtd))
define KernelPackage/dm
SUBMENU:=$(BLOCK_MENU)
TITLE:=Device Mapper
# All the "=n" are unnecessary, they're only there
# to stop the config from asking the question.
# MIRROR is M because I've needed it for pvmove.
KCONFIG:= \
CONFIG_BLK_DEV_MD=n \
CONFIG_DM_DEBUG=n \
CONFIG_DM_UEVENT=n \
CONFIG_DM_DELAY=n \
CONFIG_DM_MULTIPATH=n \
CONFIG_DM_ZERO=n \
CONFIG_DM_SNAPSHOT=n \
CONFIG_DM_LOG_USERSPACE=n \
CONFIG_MD=y \
CONFIG_BLK_DEV_DM \
CONFIG_DM_CRYPT \
CONFIG_DM_MIRROR
FILES:=$(LINUX_DIR)/drivers/md/dm-*.ko
AUTOLOAD:=$(call AutoLoad,30,dm-mod dm-log dm-region-hash dm-mirror dm-crypt)
endef
define KernelPackage/dm/description
Kernel module necessary for LVM2 support
endef
$(eval $(call KernelPackage,dm))
define KernelPackage/md-mod
SUBMENU:=$(BLOCK_MENU)
TITLE:=MD RAID
KCONFIG:= \
CONFIG_MD=y \
CONFIG_BLK_DEV_MD=m \
CONFIG_MD_AUTODETECT=y \
CONFIG_MD_FAULTY=n
FILES:=$(LINUX_DIR)/drivers/md/md-mod.ko
AUTOLOAD:=$(call AutoLoad,27,md-mod)
endef
define KernelPackage/md-mod/description
Kernel RAID md module (md-mod.ko).
You will need to select at least one RAID level module below.
endef
$(eval $(call KernelPackage,md-mod))
define KernelPackage/md/Depends
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=kmod-md-mod $(1)
endef
define KernelPackage/md-linear
$(call KernelPackage/md/Depends,)
TITLE:=RAID Linear Module
KCONFIG:=CONFIG_MD_LINEAR
FILES:=$(LINUX_DIR)/drivers/md/linear.ko
AUTOLOAD:=$(call AutoLoad,28,linear)
endef
define KernelPackage/md-linear/description
RAID "Linear" or "Append" driver module (linear.ko)
endef
$(eval $(call KernelPackage,md-linear))
define KernelPackage/md-raid0
$(call KernelPackage/md/Depends,)
TITLE:=RAID0 Module
KCONFIG:=CONFIG_MD_RAID0
FILES:=$(LINUX_DIR)/drivers/md/raid0.ko
AUTOLOAD:=$(call AutoLoad,28,raid0)
endef
define KernelPackage/md-raid0/description
RAID Level 0 (Striping) driver module (raid0.ko)
endef
$(eval $(call KernelPackage,md-raid0))
define KernelPackage/md-raid1
$(call KernelPackage/md/Depends,)
TITLE:=RAID1 Module
KCONFIG:=CONFIG_MD_RAID1
FILES:=$(LINUX_DIR)/drivers/md/raid1.ko
AUTOLOAD:=$(call AutoLoad,28,raid1)
endef
define KernelPackage/md-raid1/description
RAID Level 1 (Mirroring) driver (raid1.ko)
endef
$(eval $(call KernelPackage,md-raid1))
define KernelPackage/md-raid10
$(call KernelPackage/md/Depends,)
TITLE:=RAID10 Module
KCONFIG:=CONFIG_MD_RAID10
FILES:=$(LINUX_DIR)/drivers/md/raid10.ko
AUTOLOAD:=$(call AutoLoad,28,raid10)
endef
define KernelPackage/md-raid10/description
RAID Level 10 (Mirroring+Striping) driver module (raid10.ko)
endef
$(eval $(call KernelPackage,md-raid10))
define KernelPackage/md-raid456
$(call KernelPackage/md/Depends,)
TITLE:=RAID Level 456 Driver
KCONFIG:= \
CONFIG_XOR_BLOCKS \
CONFIG_ASYNC_CORE \
CONFIG_ASYNC_MEMCPY \
CONFIG_ASYNC_XOR \
CONFIG_ASYNC_PQ \
CONFIG_ASYNC_RAID6_RECOV \
CONFIG_ASYNC_RAID6_TEST=n \
CONFIG_MD_RAID6_PQ \
CONFIG_MD_RAID456 \
CONFIG_MULTICORE_RAID456=n
FILES:= \
$(LINUX_DIR)/crypto/xor.ko \
$(LINUX_DIR)/crypto/async_tx/async_tx.ko \
$(LINUX_DIR)/crypto/async_tx/async_memcpy.ko \
$(LINUX_DIR)/crypto/async_tx/async_xor.ko \
$(LINUX_DIR)/crypto/async_tx/async_pq.ko \
$(LINUX_DIR)/crypto/async_tx/async_raid6_recov.ko \
$(LINUX_DIR)/drivers/md/raid456.ko \
$(LINUX_DIR)/lib/raid6/raid6_pq.ko
AUTOLOAD:=$(call AutoLoad,28, xor async_tx async_memcpy async_xor raid6_pq async_pq async_raid6_recov raid456)
endef
define KernelPackage/md-raid456/description
RAID Level 4,5,6 kernel module (raid456.ko)
Includes the following modules required by
raid456.ko:
xor.ko
async_tx.ko
async_xor.ko
async_memcpy.ko
async_pq.ko
async_raid5_recov.ko
raid6_pq.ko
endef
$(eval $(call KernelPackage,md-raid456))
define KernelPackage/md-multipath
$(call KernelPackage/md/Depends,)
TITLE:=MD Multipath Module
KCONFIG:=CONFIG_MD_MULTIPATH
FILES:=$(LINUX_DIR)/drivers/md/multipath.ko
AUTOLOAD:=$(call AutoLoad,29,multipath)
endef
define KernelPackage/md-multipath/description
Multipath driver module (multipath.ko)
endef
$(eval $(call KernelPackage,md-multipath))
define KernelPackage/ide-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=IDE (ATA/ATAPI) device support
DEPENDS:=@PCI_SUPPORT
KCONFIG:= \
CONFIG_IDE \
CONFIG_BLK_DEV_IDE \
CONFIG_BLK_DEV_IDEDISK \
CONFIG_IDE_GD \
CONFIG_IDE_GD_ATA=y \
CONFIG_IDE_GD_ATAPI=n \
CONFIG_IDEPCI_PCIBUS_ORDER=y \
CONFIG_BLK_DEV_IDEDMA_PCI=y \
CONFIG_BLK_DEV_IDEPCI=y
FILES:= \
$(LINUX_DIR)/drivers/ide/ide-core.ko \
$(LINUX_DIR)/drivers/ide/ide-gd_mod.ko
AUTOLOAD:= \
$(call AutoLoad,20,ide-core,1) \
$(call AutoLoad,40,ide-gd_mod,1)
endef
define KernelPackage/ide-core/description
Kernel support for IDE, useful for usb mass storage devices (e.g. on WL-HDD)
Includes:
- ide-core
- ide-gd_mod
endef
$(eval $(call KernelPackage,ide-core))
define AddDepends/ide
SUBMENU:=$(BLOCK_MENU)
DEPENDS+=kmod-ide-core $(1)
endef
define KernelPackage/ide-generic
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=@PCI_SUPPORT
TITLE:=Kernel support for generic PCI IDE chipsets
KCONFIG:=CONFIG_BLK_DEV_GENERIC
FILES:=$(LINUX_DIR)/drivers/ide/ide-pci-generic.ko
AUTOLOAD:=$(call AutoLoad,30,ide-pci-generic,1)
$(call AddDepends/ide)
endef
$(eval $(call KernelPackage,ide-generic))
define KernelPackage/ide-generic-old
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for generic (legacy) IDE chipsets
KCONFIG:=CONFIG_IDE_GENERIC
FILES:=$(LINUX_DIR)/drivers/ide/ide-generic.ko
AUTOLOAD:=$(call AutoLoad,30,ide-generic,1)
$(call AddDepends/ide)
endef
$(eval $(call KernelPackage,ide-generic-old))
define KernelPackage/ide-aec62xx
TITLE:=Acard AEC62xx IDE driver
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_AEC62XX
FILES:=$(LINUX_DIR)/drivers/ide/aec62xx.ko
AUTOLOAD:=$(call AutoLoad,30,aec62xx,1)
$(call AddDepends/ide)
endef
define KernelPackage/ide-aec62xx/description
Support for Acard AEC62xx (Artop ATP8xx) IDE controllers.
endef
$(eval $(call KernelPackage,ide-aec62xx,1))
define KernelPackage/ide-pdc202xx
TITLE:=Promise PDC202xx IDE driver
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_PDC202XX_OLD
FILES:=$(LINUX_DIR)/drivers/ide/pdc202xx_old.ko
AUTOLOAD:=$(call AutoLoad,30,pdc202xx_old,1)
$(call AddDepends/ide)
endef
define KernelPackage/ide-pdc202xx/description
Support for the Promise Ultra 33/66/100 (PDC202{46|62|65|67|68}) IDE
controllers.
endef
$(eval $(call KernelPackage,ide-pdc202xx))
define KernelPackage/ide-it821x
TITLE:=ITE IT821x IDE driver
DEPENDS:=@PCI_SUPPORT
KCONFIG:=CONFIG_BLK_DEV_IT821X
FILES=$(LINUX_DIR)/drivers/ide/it821x.ko
AUTOLOAD:=$(call AutoLoad,30,it821x,1)
$(call AddDepends/ide)
endef
define KernelPackage/ide-it821x/description
Kernel module for the ITE IDE821x IDE controllers.
endef
$(eval $(call KernelPackage,ide-it821x))
define KernelPackage/libsas
SUBMENU:=$(BLOCK_MENU)
DEPENDS:=@TARGET_x86
TITLE:=SAS Domain Transport Attributes
KCONFIG:=CONFIG_SCSI_SAS_LIBSAS \
CONFIG_SCSI_SAS_ATTRS \
CONFIG_SCSI_SAS_ATA=y \
CONFIG_SCSI_SAS_HOST_SMP=y \
CONFIG_SCSI_SAS_LIBSAS_DEBUG=y
FILES:= \
$(LINUX_DIR)/drivers/scsi/scsi_transport_sas.ko \
$(LINUX_DIR)/drivers/scsi/libsas/libsas.ko
AUTOLOAD:=$(call AutoLoad,29,scsi_transport_sas libsas,1)
endef
define KernelPackage/libsas/description
SAS Domain Transport Attributes support.
endef
$(eval $(call KernelPackage,libsas,1))
define KernelPackage/loop
SUBMENU:=$(BLOCK_MENU)
TITLE:=Loopback device support
KCONFIG:= \
CONFIG_BLK_DEV_LOOP \
CONFIG_BLK_DEV_CRYPTOLOOP=n
FILES:=$(LINUX_DIR)/drivers/block/loop.ko
AUTOLOAD:=$(call AutoLoad,30,loop)
endef
define KernelPackage/loop/description
Kernel module for loopback device support
endef
$(eval $(call KernelPackage,loop))
define KernelPackage/mvsas
SUBMENU:=$(BLOCK_MENU)
TITLE:=Marvell 88SE6440 SAS/SATA driver
DEPENDS:=@TARGET_x86 +kmod-libsas
KCONFIG:= \
CONFIG_SCSI_MVSAS \
CONFIG_SCSI_MVSAS_TASKLET=n
FILES:=$(LINUX_DIR)/drivers/scsi/mvsas/mvsas.ko
AUTOLOAD:=$(call AutoLoad,40,mvsas,1)
endef
define KernelPackage/mvsas/description
Kernel support for the Marvell SAS SCSI adapters
endef
$(eval $(call KernelPackage,mvsas))
define KernelPackage/nbd
SUBMENU:=$(BLOCK_MENU)
TITLE:=Network block device support
KCONFIG:=CONFIG_BLK_DEV_NBD
FILES:=$(LINUX_DIR)/drivers/block/nbd.ko
AUTOLOAD:=$(call AutoLoad,30,nbd)
endef
define KernelPackage/nbd/description
Kernel module for network block device support
endef
$(eval $(call KernelPackage,nbd))
define KernelPackage/scsi-core
SUBMENU:=$(BLOCK_MENU)
TITLE:=SCSI device support
KCONFIG:= \
CONFIG_SCSI \
CONFIG_BLK_DEV_SD
FILES:= \
$(if $(findstring y,$(CONFIG_SCSI)),,$(LINUX_DIR)/drivers/scsi/scsi_mod.ko) \
$(LINUX_DIR)/drivers/scsi/sd_mod.ko
AUTOLOAD:=$(call AutoLoad,20,scsi_mod,1) $(call AutoLoad,40,sd_mod,1)
endef
$(eval $(call KernelPackage,scsi-core))
define KernelPackage/scsi-generic
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for SCSI generic
DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_CHR_DEV_SG
FILES:= \
$(LINUX_DIR)/drivers/scsi/sg.ko
AUTOLOAD:=$(call AutoLoad,65,sg)
endef
$(eval $(call KernelPackage,scsi-generic))
define KernelPackage/scsi-cdrom
SUBMENU:=$(BLOCK_MENU)
TITLE:=Kernel support for CD / DVD drives
DEPENDS:=+kmod-scsi-core
KCONFIG:= \
CONFIG_BLK_DEV_SR \
CONFIG_BLK_DEV_SR_VENDOR=n
FILES:= \
$(LINUX_DIR)/drivers/cdrom/cdrom.ko \
$(LINUX_DIR)/drivers/scsi/sr_mod.ko
AUTOLOAD:=$(call AutoLoad,30,cdrom) $(call AutoLoad,45,sr_mod)
endef
$(eval $(call KernelPackage,scsi-cdrom))