openwrtv3/target/linux/mvebu/patches-4.9/415-phylink-add-phylink-infrastructure.patch
Koen Vandeputte cd54b2d42b kernel: update kernel 4.9 to 4.9.37
- Refreshed all patches
- Removed upstreamed
- Adapted 4 patches:

473-fix-marvell-phy-initialization-issues.patch
-----------------------------------------------
Removed hunk 5 which got upstreamed

403-net-phy-avoid-setting-unsupported-EEE-advertisments.patch
404-net-phy-restart-phy-autonegotiation-after-EEE-advert.patch
--------------------------------------------------------------
Adapted these 2 RFC patches, merging the delta's from an upstream commit
(see below) which made it before these 2.

https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-
stable.git/commit/?h=v4.9.36&id=97ace183074d306942b903a148aebd5d061758f0

180-usb-xhci-add-support-for-performing-fake-doorbell.patch
-----------------------------------------------------------
- Moved fake_doorbell bitmask due to new item

Compile tested on: cns3xxx, imx6
Run tested on: cns3xxx, imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-07-15 00:13:05 +02:00

1120 lines
31 KiB
Diff

From: Russell King <rmk+kernel@arm.linux.org.uk>
Date: Tue, 22 Sep 2015 20:52:18 +0100
Subject: [PATCH] phylink: add phylink infrastructure
The link between the ethernet MAC and its PHY has become more complex
as the interface evolves. This is especially true with serdes links,
where the part of the PHY is effectively integrated into the MAC.
Serdes links can be connected to a variety of devices, including SFF
modules soldered down onto the board with the MAC, a SFP cage with
a hotpluggable SFP module which may contain a PHY or directly modulate
the serdes signals onto optical media with or without a PHY, or even
a classical PHY connection.
Moreover, the negotiation information on serdes links comes in two
varieties - SGMII mode, where the PHY provides its speed/duplex/flow
control information to the MAC, and 1000base-X mode where both ends
exchange their abilities and each resolve the link capabilities.
This means we need a more flexible means to support these arrangements,
particularly with the hotpluggable nature of SFP, where the PHY can
be attached or detached after the network device has been brought up.
Ethtool information can come from multiple sources:
- we may have a PHY operating in either SGMII or 1000base-X mode, in
which case we take ethtool/mii data directly from the PHY.
- we may have a optical SFP module without a PHY, with the MAC
operating in 1000base-X mode - the ethtool/mii data needs to come
from the MAC.
- we may have a copper SFP module with a PHY whic can't be accessed,
which means we need to take ethtool/mii data from the MAC.
Phylink aims to solve this by providing an intermediary between the
MAC and PHY, providing a safe way for PHYs to be hotplugged, and
allowing a SFP driver to reconfigure the serdes connection.
Phylink also takes over support of fixed link connections, where the
speed/duplex/flow control are fixed, but link status may be controlled
by a GPIO signal. By avoiding the fixed-phy implementation, phylink
can provide a faster response to link events: fixed-phy has to wait for
phylib to operate its state machine, which can take several seconds.
In comparison, phylink takes milliseconds.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
- remove sync status
- rework supported and advertisment handling
- add 1000base-x speed for fixed links
- use functionality exported from phy-core, reworking
__phylink_ethtool_ksettings_set for it
---
create mode 100644 drivers/net/phy/phylink.c
create mode 100644 include/linux/phylink.h
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -10,6 +10,16 @@ menuconfig PHYLIB
devices. This option provides infrastructure for
managing PHY devices.
+config PHYLINK
+ tristate
+ depends on NETDEVICES
+ select PHYLIB
+ select SWPHY
+ help
+ PHYlink models the link between the PHY and MAC, allowing fixed
+ configuration links, PHYs, and Serdes links with MAC level
+ autonegotiation modes.
+
if PHYLIB
config SWPHY
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -6,6 +6,7 @@ libphy-$(CONFIG_SWPHY) += swphy.o
obj-$(CONFIG_MDIO_BOARDINFO) += mdio-boardinfo.o
+obj-$(CONFIG_PHYLINK) += phylink.o
obj-$(CONFIG_PHYLIB) += libphy.o
obj-$(CONFIG_SWCONFIG) += swconfig.o
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1021,6 +1021,7 @@ void phy_detach(struct phy_device *phyde
phydev->attached_dev->phydev = NULL;
phydev->attached_dev = NULL;
phy_suspend(phydev);
+ phydev->phylink = NULL;
module_put(phydev->mdio.dev.driver->owner);
--- /dev/null
+++ b/drivers/net/phy/phylink.c
@@ -0,0 +1,903 @@
+/*
+ * phylink models the MAC to optional PHY connection, supporting
+ * technologies such as SFP cages where the PHY is hot-pluggable.
+ *
+ * Copyright (C) 2015 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/ethtool.h>
+#include <linux/export.h>
+#include <linux/gpio/consumer.h>
+#include <linux/netdevice.h>
+#include <linux/of.h>
+#include <linux/of_mdio.h>
+#include <linux/phy.h>
+#include <linux/phy_fixed.h>
+#include <linux/phylink.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+#include "swphy.h"
+
+#define SUPPORTED_INTERFACES \
+ (SUPPORTED_TP | SUPPORTED_MII | SUPPORTED_FIBRE | \
+ SUPPORTED_BNC | SUPPORTED_AUI | SUPPORTED_Backplane)
+#define ADVERTISED_INTERFACES \
+ (ADVERTISED_TP | ADVERTISED_MII | ADVERTISED_FIBRE | \
+ ADVERTISED_BNC | ADVERTISED_AUI | ADVERTISED_Backplane)
+
+enum {
+ PHYLINK_DISABLE_STOPPED,
+};
+
+struct phylink {
+ struct net_device *netdev;
+ const struct phylink_mac_ops *ops;
+ struct mutex config_mutex;
+
+ unsigned long phylink_disable_state; /* bitmask of disables */
+ struct phy_device *phydev;
+ phy_interface_t link_interface; /* PHY_INTERFACE_xxx */
+ u8 link_an_mode; /* MLO_AN_xxx */
+ u8 link_port; /* The current non-phy ethtool port */
+ /* ethtool supported mask for ports */
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported);
+
+ /* The link configuration settings */
+ struct phylink_link_state link_config;
+ struct gpio_desc *link_gpio;
+
+ struct mutex state_mutex; /* may be taken within config_mutex */
+ struct phylink_link_state phy_state;
+ struct work_struct resolve;
+
+ const struct phylink_module_ops *module_ops;
+ void *module_data;
+};
+
+static inline void linkmode_zero(unsigned long *dst)
+{
+ bitmap_zero(dst, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_copy(unsigned long *dst, const unsigned long *src)
+{
+ bitmap_copy(dst, src, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_and(unsigned long *dst, const unsigned long *a,
+ const unsigned long *b)
+{
+ bitmap_and(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline void linkmode_or(unsigned long *dst, const unsigned long *a,
+ const unsigned long *b)
+{
+ bitmap_or(dst, a, b, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static inline bool linkmode_empty(const unsigned long *src)
+{
+ return bitmap_empty(src, __ETHTOOL_LINK_MODE_MASK_NBITS);
+}
+
+static void phylink_set_port_bits(unsigned long *bits)
+{
+ __set_bit(ETHTOOL_LINK_MODE_TP_BIT, bits);
+ __set_bit(ETHTOOL_LINK_MODE_AUI_BIT, bits);
+ __set_bit(ETHTOOL_LINK_MODE_MII_BIT, bits);
+ __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, bits);
+ __set_bit(ETHTOOL_LINK_MODE_BNC_BIT, bits);
+ __set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, bits);
+}
+
+static const char *phylink_an_mode_str(unsigned int mode)
+{
+ static const char *modestr[] = {
+ [MLO_AN_PHY] = "phy",
+ [MLO_AN_FIXED] = "fixed",
+ [MLO_AN_SGMII] = "SGMII",
+ [MLO_AN_8023Z] = "802.3z",
+ };
+
+ return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown";
+}
+
+static int phylink_parse_fixedlink(struct phylink *pl, struct device_node *np)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
+ struct device_node *fixed_node;
+ const struct phy_setting *s;
+ struct gpio_desc *desc;
+ const __be32 *fixed_prop;
+ u32 speed;
+ int ret, len;
+
+ fixed_node = of_get_child_by_name(np, "fixed-link");
+ if (fixed_node) {
+ ret = of_property_read_u32(fixed_node, "speed", &speed);
+
+ pl->link_config.speed = speed;
+ pl->link_config.duplex = DUPLEX_HALF;
+
+ if (of_property_read_bool(fixed_node, "full-duplex"))
+ pl->link_config.duplex = DUPLEX_FULL;
+ if (of_property_read_bool(fixed_node, "pause"))
+ pl->link_config.pause |= MLO_PAUSE_SYM;
+ if (of_property_read_bool(fixed_node, "asym-pause"))
+ pl->link_config.pause |= MLO_PAUSE_ASYM;
+
+ if (ret == 0) {
+ desc = fwnode_get_named_gpiod(&fixed_node->fwnode,
+ "link-gpios");
+
+ if (!IS_ERR(desc))
+ pl->link_gpio = desc;
+ else if (desc == ERR_PTR(-EPROBE_DEFER))
+ ret = -EPROBE_DEFER;
+ }
+ of_node_put(fixed_node);
+
+ if (ret)
+ return ret;
+ } else {
+ fixed_prop = of_get_property(np, "fixed-link", &len);
+ if (!fixed_prop) {
+ netdev_err(pl->netdev, "broken fixed-link?\n");
+ return -EINVAL;
+ }
+ if (len == 5 * sizeof(*fixed_prop)) {
+ pl->link_config.duplex = be32_to_cpu(fixed_prop[1]) ?
+ DUPLEX_FULL : DUPLEX_HALF;
+ pl->link_config.speed = be32_to_cpu(fixed_prop[2]);
+ if (be32_to_cpu(fixed_prop[3]))
+ pl->link_config.pause |= MLO_PAUSE_SYM;
+ if (be32_to_cpu(fixed_prop[4]))
+ pl->link_config.pause |= MLO_PAUSE_ASYM;
+ }
+ }
+
+ bitmap_fill(mask, __ETHTOOL_LINK_MODE_MASK_NBITS);
+ pl->ops->validate_support(pl->netdev, MLO_AN_FIXED, mask);
+
+ pl->link_config.link = 1;
+ pl->link_config.an_complete = 1;
+
+ if (pl->link_config.speed > SPEED_1000 &&
+ pl->link_config.duplex != DUPLEX_FULL)
+ netdev_warn(pl->netdev, "fixed link specifies half duplex for %dMbps link?\n",
+ pl->link_config.speed);
+
+ s = phy_lookup_setting(pl->link_config.speed, pl->link_config.duplex,
+ mask, __ETHTOOL_LINK_MODE_MASK_NBITS, true);
+ if (s) {
+ __set_bit(s->bit, pl->supported);
+ } else {
+ netdev_warn(pl->netdev, "fixed link %s duplex %dMbps not recognised\n",
+ pl->link_config.duplex == DUPLEX_FULL ? "full" : "half",
+ pl->link_config.speed);
+ }
+ return 0;
+}
+
+static int phylink_parse_mode(struct phylink *pl, struct device_node *np)
+{
+ struct device_node *dn;
+ const char *managed;
+
+ dn = of_get_child_by_name(np, "fixed-link");
+ if (dn || of_find_property(np, "fixed-link", NULL))
+ pl->link_an_mode = MLO_AN_FIXED;
+ of_node_put(dn);
+
+ if (of_property_read_string(np, "managed", &managed) == 0 &&
+ strcmp(managed, "in-band-status") == 0) {
+ if (pl->link_an_mode == MLO_AN_FIXED) {
+ netdev_err(pl->netdev,
+ "can't use both fixed-link and in-band-status\n");
+ return -EINVAL;
+ }
+ phylink_set(pl->supported, 10baseT_Half);
+ phylink_set(pl->supported, 10baseT_Full);
+ phylink_set(pl->supported, 100baseT_Half);
+ phylink_set(pl->supported, 100baseT_Full);
+ phylink_set(pl->supported, 1000baseT_Half);
+ phylink_set(pl->supported, 1000baseT_Full);
+ phylink_set(pl->supported, Asym_Pause);
+ phylink_set(pl->supported, Pause);
+ pl->link_an_mode = MLO_AN_SGMII;
+ pl->link_config.an_enabled = true;
+ pl->ops->validate_support(pl->netdev, pl->link_an_mode,
+ pl->supported);
+ }
+
+ return 0;
+}
+
+
+static void phylink_init_advert(struct phylink *pl, unsigned int mode,
+ const unsigned long *supported,
+ unsigned long *advertising)
+{
+ linkmode_copy(advertising, supported);
+ if (pl->ops->validate_advert)
+ pl->ops->validate_advert(pl->netdev, mode, supported,
+ advertising);
+}
+
+static void phylink_mac_config(struct phylink *pl,
+ const struct phylink_link_state *state)
+{
+ netdev_dbg(pl->netdev,
+ "%s: mode=%s/%s/%s adv=%*pb pause=%02x link=%u an=%u\n",
+ __func__, phylink_an_mode_str(pl->link_an_mode),
+ phy_speed_to_str(state->speed),
+ phy_duplex_to_str(state->duplex),
+ __ETHTOOL_LINK_MODE_MASK_NBITS, state->advertising,
+ state->pause, state->link, state->an_enabled);
+
+ pl->ops->mac_config(pl->netdev, pl->link_an_mode, state);
+}
+
+static void phylink_mac_an_restart(struct phylink *pl)
+{
+ if (pl->link_config.an_enabled)
+ pl->ops->mac_an_restart(pl->netdev, pl->link_an_mode);
+}
+
+static int phylink_get_mac_state(struct phylink *pl, struct phylink_link_state *state)
+{
+ struct net_device *ndev = pl->netdev;
+
+ linkmode_copy(state->advertising, pl->link_config.advertising);
+ linkmode_zero(state->lp_advertising);
+ state->an_enabled = pl->link_config.an_enabled;
+ state->link = 1;
+
+ return pl->ops->mac_link_state(ndev, state);
+}
+
+/* The fixed state is... fixed except for the link state,
+ * which may be determined by a GPIO.
+ */
+static void phylink_get_fixed_state(struct phylink *pl, struct phylink_link_state *state)
+{
+ *state = pl->link_config;
+ if (pl->link_gpio)
+ state->link = !!gpiod_get_value(pl->link_gpio);
+}
+
+static void phylink_resolve(struct work_struct *w)
+{
+ struct phylink *pl = container_of(w, struct phylink, resolve);
+ struct phylink_link_state link_state;
+ struct net_device *ndev = pl->netdev;
+
+ mutex_lock(&pl->state_mutex);
+ if (pl->phylink_disable_state) {
+ link_state.link = false;
+ } else {
+ switch (pl->link_an_mode) {
+ case MLO_AN_PHY:
+ link_state = pl->phy_state;
+ break;
+
+ case MLO_AN_FIXED:
+ phylink_get_fixed_state(pl, &link_state);
+ break;
+
+ case MLO_AN_SGMII:
+ phylink_get_mac_state(pl, &link_state);
+ if (pl->phydev)
+ link_state.link = link_state.link &&
+ pl->phy_state.link;
+ break;
+
+ case MLO_AN_8023Z:
+ phylink_get_mac_state(pl, &link_state);
+ break;
+ }
+ }
+
+ if (link_state.link != netif_carrier_ok(ndev)) {
+ if (!link_state.link) {
+ netif_carrier_off(ndev);
+ pl->ops->mac_link_down(ndev, pl->link_an_mode);
+ netdev_info(ndev, "Link is Down\n");
+ } else {
+ /* If we have a PHY, we need the MAC updated with
+ * the current link parameters (eg, in SGMII mode,
+ * with flow control status.)
+ */
+ if (pl->phydev)
+ phylink_mac_config(pl, &link_state);
+
+ pl->ops->mac_link_up(ndev, pl->link_an_mode);
+
+ netif_carrier_on(ndev);
+
+ netdev_info(ndev,
+ "Link is Up - %s/%s - flow control %s\n",
+ phy_speed_to_str(link_state.speed),
+ phy_duplex_to_str(link_state.duplex),
+ link_state.pause ? "rx/tx" : "off");
+ }
+ }
+ mutex_unlock(&pl->state_mutex);
+}
+
+static void phylink_run_resolve(struct phylink *pl)
+{
+ if (!pl->phylink_disable_state)
+ queue_work(system_power_efficient_wq, &pl->resolve);
+}
+
+struct phylink *phylink_create(struct net_device *ndev, struct device_node *np,
+ phy_interface_t iface, const struct phylink_mac_ops *ops)
+{
+ struct phylink *pl;
+ int ret;
+
+ pl = kzalloc(sizeof(*pl), GFP_KERNEL);
+ if (!pl)
+ return ERR_PTR(-ENOMEM);
+
+ mutex_init(&pl->state_mutex);
+ mutex_init(&pl->config_mutex);
+ INIT_WORK(&pl->resolve, phylink_resolve);
+ pl->netdev = ndev;
+ pl->link_interface = iface;
+ pl->link_port = PORT_MII;
+ pl->link_config.speed = SPEED_UNKNOWN;
+ pl->link_config.duplex = DUPLEX_UNKNOWN;
+ pl->ops = ops;
+ __set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+
+ ret = phylink_parse_mode(pl, np);
+ if (ret < 0) {
+ kfree(pl);
+ return ERR_PTR(ret);
+ }
+
+ if (pl->link_an_mode == MLO_AN_FIXED) {
+ ret = phylink_parse_fixedlink(pl, np);
+ if (ret < 0) {
+ kfree(pl);
+ return ERR_PTR(ret);
+ }
+ }
+
+ phylink_set(pl->supported, MII);
+ phylink_init_advert(pl, pl->link_an_mode, pl->supported,
+ pl->link_config.advertising);
+
+ return pl;
+}
+EXPORT_SYMBOL_GPL(phylink_create);
+
+void phylink_destroy(struct phylink *pl)
+{
+ cancel_work_sync(&pl->resolve);
+ kfree(pl);
+}
+EXPORT_SYMBOL_GPL(phylink_destroy);
+
+void phylink_phy_change(struct phy_device *phydev, bool up, bool do_carrier)
+{
+ struct phylink *pl = phydev->phylink;
+
+ mutex_lock(&pl->state_mutex);
+ pl->phy_state.speed = phydev->speed;
+ pl->phy_state.duplex = phydev->duplex;
+ pl->phy_state.pause = MLO_PAUSE_NONE;
+ if (phydev->pause)
+ pl->phy_state.pause |= MLO_PAUSE_SYM;
+ if (phydev->asym_pause)
+ pl->phy_state.pause |= MLO_PAUSE_ASYM;
+ pl->phy_state.link = up;
+ mutex_unlock(&pl->state_mutex);
+
+ phylink_run_resolve(pl);
+
+ netdev_dbg(pl->netdev, "phy link %s %s/%s\n", up ? "up" : "down",
+ phy_speed_to_str(phydev->speed),
+ phy_duplex_to_str(phydev->duplex));
+}
+
+static int phylink_empty_linkmode(const unsigned long *linkmode)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(tmp) = { 0, };
+
+ phylink_set_port_bits(tmp);
+ phylink_set(tmp, Autoneg);
+ phylink_set(tmp, Pause);
+ phylink_set(tmp, Asym_Pause);
+
+ bitmap_andnot(tmp, linkmode, tmp, __ETHTOOL_LINK_MODE_MASK_NBITS);
+
+ return linkmode_empty(tmp);
+}
+
+static int phylink_validate_support(struct phylink *pl, int mode,
+ unsigned long *mask)
+{
+ pl->ops->validate_support(pl->netdev, mode, mask);
+
+ return phylink_empty_linkmode(mask) ? -EINVAL : 0;
+}
+
+static int phylink_bringup_phy(struct phylink *pl, struct phy_device *phy)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
+ u32 advertising;
+ int ret;
+
+ ethtool_convert_legacy_u32_to_link_mode(mask, phy->supported);
+ ret = phylink_validate_support(pl, pl->link_an_mode, mask);
+ if (ret)
+ return ret;
+
+ mutex_lock(&pl->config_mutex);
+ phy->phylink = pl;
+ phy->phy_link_change = phylink_phy_change;
+
+ netdev_info(pl->netdev,
+ "PHY [%s] driver [%s]\n", dev_name(&phy->mdio.dev),
+ phy->drv->name);
+
+ mutex_lock(&pl->state_mutex);
+ pl->phydev = phy;
+ linkmode_copy(pl->supported, mask);
+
+ /* Restrict the phy advertisment according to the MAC support. */
+ ethtool_convert_link_mode_to_legacy_u32(&advertising, mask);
+ phy->advertising &= ADVERTISED_INTERFACES | advertising;
+ ethtool_convert_legacy_u32_to_link_mode(pl->link_config.advertising,
+ phy->advertising);
+ mutex_unlock(&pl->state_mutex);
+
+ netdev_dbg(pl->netdev,
+ "phy: setting supported %*pb advertising 0x%08x\n",
+ __ETHTOOL_LINK_MODE_MASK_NBITS, pl->supported,
+ phy->advertising);
+
+ phy_start_machine(phy);
+ if (phy->irq > 0)
+ phy_start_interrupts(phy);
+
+ mutex_unlock(&pl->config_mutex);
+
+ return 0;
+}
+
+int phylink_connect_phy(struct phylink *pl, struct phy_device *phy)
+{
+ int ret;
+
+ ret = phy_attach_direct(pl->netdev, phy, 0, pl->link_interface);
+ if (ret)
+ return ret;
+
+ ret = phylink_bringup_phy(pl, phy);
+ if (ret)
+ phy_detach(phy);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_connect_phy);
+
+int phylink_of_phy_connect(struct phylink *pl, struct device_node *dn)
+{
+ struct device_node *phy_node;
+ struct phy_device *phy_dev;
+ int ret;
+
+ /* Fixed links are handled without needing a PHY */
+ if (pl->link_an_mode == MLO_AN_FIXED)
+ return 0;
+
+ phy_node = of_parse_phandle(dn, "phy-handle", 0);
+ if (!phy_node)
+ phy_node = of_parse_phandle(dn, "phy", 0);
+ if (!phy_node)
+ phy_node = of_parse_phandle(dn, "phy-device", 0);
+
+ if (!phy_node) {
+ if (pl->link_an_mode == MLO_AN_PHY) {
+ netdev_err(pl->netdev, "unable to find PHY node\n");
+ return -ENODEV;
+ }
+ return 0;
+ }
+
+ phy_dev = of_phy_attach(pl->netdev, phy_node, 0, pl->link_interface);
+ /* We're done with the phy_node handle */
+ of_node_put(phy_node);
+
+ if (!phy_dev)
+ return -ENODEV;
+
+ ret = phylink_bringup_phy(pl, phy_dev);
+ if (ret)
+ phy_detach(phy_dev);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_of_phy_connect);
+
+void phylink_disconnect_phy(struct phylink *pl)
+{
+ struct phy_device *phy;
+
+ mutex_lock(&pl->config_mutex);
+ phy = pl->phydev;
+
+ mutex_lock(&pl->state_mutex);
+ pl->phydev = NULL;
+ mutex_unlock(&pl->state_mutex);
+ flush_work(&pl->resolve);
+
+ if (phy)
+ phy_disconnect(phy);
+
+ mutex_unlock(&pl->config_mutex);
+}
+EXPORT_SYMBOL_GPL(phylink_disconnect_phy);
+
+void phylink_mac_change(struct phylink *pl, bool up)
+{
+ phylink_run_resolve(pl);
+ netdev_dbg(pl->netdev, "mac link %s\n", up ? "up" : "down");
+}
+EXPORT_SYMBOL_GPL(phylink_mac_change);
+
+void phylink_start(struct phylink *pl)
+{
+ mutex_lock(&pl->config_mutex);
+
+ netdev_info(pl->netdev, "configuring for %s link mode\n",
+ phylink_an_mode_str(pl->link_an_mode));
+
+ /* Apply the link configuration to the MAC when starting. This allows
+ * a fixed-link to start with the correct parameters, and also
+ * ensures that we set the appropriate advertisment for Serdes links.
+ */
+ phylink_mac_config(pl, &pl->link_config);
+
+ clear_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ phylink_run_resolve(pl);
+
+ if (pl->phydev)
+ phy_start(pl->phydev);
+
+ mutex_unlock(&pl->config_mutex);
+}
+EXPORT_SYMBOL_GPL(phylink_start);
+
+void phylink_stop(struct phylink *pl)
+{
+ mutex_lock(&pl->config_mutex);
+
+ if (pl->phydev)
+ phy_stop(pl->phydev);
+
+ set_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state);
+ flush_work(&pl->resolve);
+
+ mutex_unlock(&pl->config_mutex);
+}
+EXPORT_SYMBOL_GPL(phylink_stop);
+
+static void phylink_merge_link_mode(unsigned long *dst, const unsigned long *b)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask);
+
+ linkmode_zero(mask);
+ phylink_set_port_bits(mask);
+
+ linkmode_and(dst, dst, mask);
+ linkmode_or(dst, dst, b);
+}
+
+static void phylink_get_ksettings(const struct phylink_link_state *state,
+ struct ethtool_link_ksettings *kset)
+{
+ phylink_merge_link_mode(kset->link_modes.advertising, state->advertising);
+ linkmode_copy(kset->link_modes.lp_advertising, state->lp_advertising);
+ kset->base.speed = state->speed;
+ kset->base.duplex = state->duplex;
+ kset->base.autoneg = state->an_enabled ? AUTONEG_ENABLE :
+ AUTONEG_DISABLE;
+}
+
+static int __phylink_ethtool_ksettings_get(struct phylink *pl,
+ struct ethtool_link_ksettings *kset)
+{
+ struct phylink_link_state link_state;
+ int ret;
+
+ if (pl->phydev) {
+ ret = phy_ethtool_ksettings_get(pl->phydev, kset);
+ if (ret)
+ return ret;
+ } else {
+ kset->base.port = pl->link_port;
+ }
+
+ linkmode_copy(kset->link_modes.supported, pl->supported);
+
+ switch (pl->link_an_mode) {
+ case MLO_AN_FIXED:
+ /* We are using fixed settings. Report these as the
+ * current link settings - and note that these also
+ * represent the supported speeds/duplex/pause modes.
+ */
+ phylink_get_fixed_state(pl, &link_state);
+ phylink_get_ksettings(&link_state, kset);
+ break;
+
+ case MLO_AN_SGMII:
+ /* If there is a phy attached, then use the reported
+ * settings from the phy with no modification.
+ */
+ if (pl->phydev)
+ break;
+
+ case MLO_AN_8023Z:
+ phylink_get_mac_state(pl, &link_state);
+
+ /* The MAC is reporting the link results from its own PCS
+ * layer via in-band status. Report these as the current
+ * link settings.
+ */
+ phylink_get_ksettings(&link_state, kset);
+ break;
+ }
+
+ return 0;
+}
+
+int phylink_ethtool_ksettings_get(struct phylink *pl,
+ struct ethtool_link_ksettings *kset)
+{
+ int ret;
+
+ mutex_lock(&pl->config_mutex);
+ ret = __phylink_ethtool_ksettings_get(pl, kset);
+ mutex_unlock(&pl->config_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_get);
+
+static int __phylink_ethtool_ksettings_set(struct phylink *pl,
+ const struct ethtool_link_ksettings *kset)
+{
+ struct ethtool_link_ksettings our_kset = *kset;
+ int ret;
+
+ /* Mask out unsupported advertisments */
+ linkmode_and(our_kset.link_modes.advertising,
+ kset->link_modes.advertising, pl->supported);
+
+ if (pl->ops->validate_advert)
+ pl->ops->validate_advert(pl->netdev, pl->link_an_mode,
+ pl->supported,
+ our_kset.link_modes.advertising);
+
+ /* FIXME: should we reject autoneg if phy/mac does not support it? */
+
+ if (kset->base.autoneg == AUTONEG_DISABLE) {
+ const struct phy_setting *s;
+
+ /* Autonegotiation disabled, select a suitable speed and
+ * duplex.
+ */
+ s = phy_lookup_setting(kset->base.speed, kset->base.duplex,
+ pl->supported,
+ __ETHTOOL_LINK_MODE_MASK_NBITS, false);
+ if (!s)
+ return -EINVAL;
+
+ /* If we have a fixed link (as specified by firmware), refuse
+ * to change link parameters.
+ */
+ if (pl->link_an_mode == MLO_AN_FIXED &&
+ (s->speed != pl->link_config.speed ||
+ s->duplex != pl->link_config.duplex))
+ return -EINVAL;
+
+ our_kset.base.speed = s->speed;
+ our_kset.base.duplex = s->duplex;
+
+ __clear_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ our_kset.link_modes.advertising);
+ } else {
+ /* If we have a fixed link, refuse to enable autonegotiation */
+ if (pl->link_an_mode == MLO_AN_FIXED)
+ return -EINVAL;
+
+ /* Autonegotiation enabled, validate advertisment */
+ if (phylink_empty_linkmode(our_kset.link_modes.advertising))
+ return -EINVAL;
+
+ __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT,
+ our_kset.link_modes.advertising);
+ }
+
+ /* If we have a PHY, configure the phy */
+ if (pl->phydev) {
+ ret = phy_ethtool_ksettings_set(pl->phydev, &our_kset);
+ if (ret)
+ return ret;
+ }
+
+ mutex_lock(&pl->state_mutex);
+ /* Configure the MAC to match the new settings */
+ linkmode_copy(pl->link_config.advertising, our_kset.link_modes.advertising);
+ pl->link_config.speed = our_kset.base.speed;
+ pl->link_config.duplex = our_kset.base.duplex;
+ pl->link_config.an_enabled = our_kset.base.autoneg != AUTONEG_DISABLE;
+
+ if (!test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) {
+ phylink_mac_config(pl, &pl->link_config);
+ phylink_mac_an_restart(pl);
+ }
+ mutex_unlock(&pl->state_mutex);
+
+ return ret;
+}
+
+int phylink_ethtool_ksettings_set(struct phylink *pl,
+ const struct ethtool_link_ksettings *kset)
+{
+ int ret;
+
+ if (kset->base.autoneg != AUTONEG_DISABLE &&
+ kset->base.autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+
+ mutex_lock(&pl->config_mutex);
+ ret = __phylink_ethtool_ksettings_set(pl, kset);
+ mutex_unlock(&pl->config_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_ethtool_ksettings_set);
+
+/* This emulates MII registers for a fixed-mode phy operating as per the
+ * passed in state. "aneg" defines if we report negotiation is possible.
+ *
+ * FIXME: should deal with negotiation state too.
+ */
+static int phylink_mii_emul_read(struct net_device *ndev, unsigned int reg,
+ struct phylink_link_state *state, bool aneg)
+{
+ struct fixed_phy_status fs;
+ int val;
+
+ fs.link = state->link;
+ fs.speed = state->speed;
+ fs.duplex = state->duplex;
+ fs.pause = state->pause & MLO_PAUSE_SYM;
+ fs.asym_pause = state->pause & MLO_PAUSE_ASYM;
+
+ val = swphy_read_reg(reg, &fs);
+ if (reg == MII_BMSR) {
+ if (!state->an_complete)
+ val &= ~BMSR_ANEGCOMPLETE;
+ if (!aneg)
+ val &= ~BMSR_ANEGCAPABLE;
+ }
+ return val;
+}
+
+static int phylink_mii_read(struct phylink *pl, unsigned int phy_id,
+ unsigned int reg)
+{
+ struct phylink_link_state state;
+ int val = 0xffff;
+
+ /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */
+ if (pl->phydev)
+ return mdiobus_read(pl->phydev->mdio.bus, phy_id, reg);
+
+ switch (pl->link_an_mode) {
+ case MLO_AN_FIXED:
+ if (phy_id == 0) {
+ phylink_get_fixed_state(pl, &state);
+ val = phylink_mii_emul_read(pl->netdev, reg, &state,
+ true);
+ }
+ break;
+
+ case MLO_AN_PHY:
+ return -EOPNOTSUPP;
+
+ case MLO_AN_SGMII:
+ /* No phy, fall through to 8023z method */
+ case MLO_AN_8023Z:
+ if (phy_id == 0) {
+ val = phylink_get_mac_state(pl, &state);
+ if (val < 0)
+ return val;
+
+ val = phylink_mii_emul_read(pl->netdev, reg, &state,
+ true);
+ }
+ break;
+ }
+
+ return val & 0xffff;
+}
+
+static int phylink_mii_write(struct phylink *pl, unsigned int phy_id,
+ unsigned int reg, unsigned int val)
+{
+ /* PHYs only exist for MLO_AN_PHY and MLO_AN_SGMII */
+ if (pl->phydev) {
+ mdiobus_write(pl->phydev->mdio.bus, phy_id, reg, val);
+ return 0;
+ }
+
+ switch (pl->link_an_mode) {
+ case MLO_AN_FIXED:
+ break;
+
+ case MLO_AN_PHY:
+ return -EOPNOTSUPP;
+
+ case MLO_AN_SGMII:
+ /* No phy, fall through to 8023z method */
+ case MLO_AN_8023Z:
+ break;
+ }
+
+ return 0;
+}
+
+int phylink_mii_ioctl(struct phylink *pl, struct ifreq *ifr, int cmd)
+{
+ struct mii_ioctl_data *mii_data = if_mii(ifr);
+ int val, ret;
+
+ mutex_lock(&pl->config_mutex);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ mii_data->phy_id = pl->phydev ? pl->phydev->mdio.addr : 0;
+ /* fallthrough */
+
+ case SIOCGMIIREG:
+ val = phylink_mii_read(pl, mii_data->phy_id, mii_data->reg_num);
+ if (val < 0) {
+ ret = val;
+ } else {
+ mii_data->val_out = val;
+ ret = 0;
+ }
+ break;
+
+ case SIOCSMIIREG:
+ ret = phylink_mii_write(pl, mii_data->phy_id, mii_data->reg_num,
+ mii_data->val_in);
+ break;
+
+ default:
+ ret = -EOPNOTSUPP;
+ if (pl->phydev)
+ ret = phy_mii_ioctl(pl->phydev, ifr, cmd);
+ break;
+ }
+
+ mutex_unlock(&pl->config_mutex);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(phylink_mii_ioctl);
+
+MODULE_LICENSE("GPL");
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -153,6 +153,7 @@ static inline const char *phy_modes(phy_
#define MII_ADDR_C45 (1<<30)
struct device;
+struct phylink;
struct sk_buff;
/*
@@ -425,6 +426,7 @@ struct phy_device {
struct mutex lock;
+ struct phylink *phylink;
struct net_device *attached_dev;
u8 mdix;
--- /dev/null
+++ b/include/linux/phylink.h
@@ -0,0 +1,100 @@
+#ifndef NETDEV_PCS_H
+#define NETDEV_PCS_H
+
+#include <linux/phy.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+
+struct device_node;
+struct ethtool_cmd;
+struct net_device;
+
+enum {
+ MLO_PAUSE_NONE,
+ MLO_PAUSE_ASYM = BIT(0),
+ MLO_PAUSE_SYM = BIT(1),
+
+ MLO_AN_PHY = 0,
+ MLO_AN_FIXED,
+ MLO_AN_SGMII,
+ MLO_AN_8023Z,
+};
+
+struct phylink_link_state {
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(advertising);
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(lp_advertising);
+ int speed;
+ int duplex;
+ int pause;
+ unsigned int link:1;
+ unsigned int an_enabled:1;
+ unsigned int an_complete:1;
+};
+
+struct phylink_mac_ops {
+ /**
+ * @validate_support:
+ *
+ * Validate and update the support mask provided by a PHY or
+ * module. Unsupported link modes should be cleared by the
+ * MAC.
+ *
+ * Note: the PHY may be able to transform from one connection
+ * technology to another, so, eg, don't clear 1000base-X just
+ * because the MAC is unable to support it. This is more about
+ * clearing unsupported speeds and duplex settings.
+ */
+ void (*validate_support)(struct net_device *, unsigned int mode,
+ unsigned long *support);
+
+ /**
+ * @validate_advert:
+ *
+ * Validate and update the advertisment mask, clearing bits that
+ * can not be advertised in the chosen mode or with each other.
+ */
+ void (*validate_advert)(struct net_device *, unsigned int mode,
+ const unsigned long *support,
+ unsigned long *advert);
+
+ /* Read the current link state from the hardware */
+ int (*mac_link_state)(struct net_device *, struct phylink_link_state *);
+
+ /* Configure the MAC */
+ void (*mac_config)(struct net_device *, unsigned int mode,
+ const struct phylink_link_state *);
+ void (*mac_an_restart)(struct net_device *, unsigned int mode);
+
+ void (*mac_link_down)(struct net_device *, unsigned int mode);
+ void (*mac_link_up)(struct net_device *, unsigned int mode);
+};
+
+struct phylink *phylink_create(struct net_device *, struct device_node *,
+ phy_interface_t iface, const struct phylink_mac_ops *ops);
+void phylink_destroy(struct phylink *);
+
+int phylink_connect_phy(struct phylink *, struct phy_device *);
+int phylink_of_phy_connect(struct phylink *, struct device_node *);
+void phylink_disconnect_phy(struct phylink *);
+
+void phylink_mac_change(struct phylink *, bool up);
+
+void phylink_start(struct phylink *);
+void phylink_stop(struct phylink *);
+
+int phylink_ethtool_ksettings_get(struct phylink *,
+ struct ethtool_link_ksettings *);
+int phylink_ethtool_ksettings_set(struct phylink *,
+ const struct ethtool_link_ksettings *);
+int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+
+#define phylink_zero(bm) \
+ bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
+#define __phylink_do_bit(op, bm, mode) \
+ op(ETHTOOL_LINK_MODE_ ## mode ## _BIT, bm)
+
+#define phylink_set(bm, mode) __phylink_do_bit(__set_bit, bm, mode)
+#define phylink_clear(bm, mode) __phylink_do_bit(__clear_bit, bm, mode)
+#define phylink_test(bm, mode) __phylink_do_bit(test_bit, bm, mode)
+
+#endif