No description
Find a file
Gabor Juhos b0b994cf76 ar71xx: set pad6 cfg for AR8327 on the AP136 board
Also override the pll_1000 value. Without these settings
ethernet suffers from packet loss.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34316
2012-11-23 20:55:34 +00:00
docs update switch documentation 2012-10-12 12:13:56 +00:00
include add preliminary support for musl 2012-11-23 20:02:29 +00:00
package add preliminary support for musl 2012-11-23 20:02:29 +00:00
scripts add preliminary support for musl 2012-11-23 20:02:29 +00:00
target ar71xx: set pad6 cfg for AR8327 on the AP136 board 2012-11-23 20:55:34 +00:00
toolchain add preliminary support for musl 2012-11-23 20:02:29 +00:00
tools ipkg-utils: Force gnu format for tar (#12496) 2012-11-19 19:29:01 +00:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore .gitignore: Ignore Emacs editor generated files 2011-10-31 09:37:59 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in hide C++ standard library selection behind INSTALL_LIBSTDCPP 2012-10-24 13:05:07 +00:00
feeds.conf.default Add xorg feed to feeds.conf.default 2011-11-16 16:05:23 +00:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile Makefile: add a check to bail out early when the path to the openwrt directory contains spaces (#12344) 2012-10-21 02:00:11 +00:00
README trying to make README file a bit more helpful 2012-01-21 01:15:24 +00:00
rules.mk rules.mk: fix misspelled config symbol introduced by r34300 2012-11-23 10:12:18 +00:00

This is the buildsystem for the OpenWrt Linux distribution.

Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, patch, bzip2, flex,
make, gettext, pkg-config, unzip, libz-dev and libc headers.

Run "./scripts/feeds update" to get the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install" to install symlinks into "package/feeds/*".

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

You can use "scripts/flashing/flash.sh" for remotely updating your embedded
system via tftp.

The OpenWrt system is documented in docs/. You will need a LaTeX distribution
and the tex4ht package to build the documentation. Type "make -C docs/" to build it.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your OpenWrt Project
	http://openwrt.org