KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/ramips/image/Makefile
John Crispin b04bb3eea7 ramips: Support for RAMIPS based Tripmate HT-TM02 board 
Provides support for the Tripmate HT-TM02 personal router including LEDs and
reset button. “Mode” switch is not supported. New profile includes full set
of packages required to enable LEDs, USB, and LUCI. Patches were applied
against trunk snapshot r42649. Functionality has been tested in AP, basic wifi
client, wifi router, and routed client modes - all good.

Signed-off-by: Ron Curry <wingspinner@gmail.com>

SVN-Revision: 42785
2014-10-06 04:52:07 +00:00

816 lines
33 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2008-2011 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk
define imgname
$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)
endef
define sysupname
$(call imgname,$(1),$(2))-sysupgrade.bin
endef
VMLINUX:=$(IMG_PREFIX)-vmlinux
UIMAGE:=$(IMG_PREFIX)-uImage
ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
define Image/Build/Initramfs
$(call Image/Build/Profile/$(PROFILE),initramfs)
endef
endif
ifeq ($(CONFIG_SOC_RT288X),y)
define kernel_entry
-a 0x88000000 -e 0x88000000
endef
else
ifeq ($(CONFIG_SOC_MT7621),y)
define kernel_entry
-a 0x80001000 -e 0x80001000
endef
else
define kernel_entry
-a 0x80000000 -e 0x80000000
endef
endif
endif
define MkCombineduImage
$(call PatchKernelLzma,$(2),$(3))
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.lzma"` -gt `expr $(4) - 64` ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.lzma is too big" >&2; \
else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \
else \
( dd if=$(KDIR)/vmlinux-$(2).bin.lzma bs=`expr $(4) - 64` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.lzma.combined ; \
fi ; fi
$(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma.combined,$(call sysupname,$(1),$(2)),$(6))
endef
#
# The real magic happens inside these templates
#
define MkImage
$(eval imagename=$(if $(4),$(4),MIPS OpenWrt Linux-$(LINUX_VERSION)))
-mkimage -A mips -O linux -T kernel -C $(1) $(call kernel_entry)\
-n "$(imagename)" \
-d $(2) $(3)
endef
define CompressLzma
$(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2)
endef
define MkImageSysupgrade/squashfs
$(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-$(if $(4),$(4),sysupgrade).bin)
cat $(KDIR)/vmlinux-$(2).uImage $(KDIR)/root.$(1) > $(KDIR)/$(output_name)
$(call prepare_generic_squashfs,$(KDIR)/$(output_name))
if [ `stat -c%s "$(KDIR)/$(output_name)"` -gt $(3) ]; then \
echo "Warning: $(KDIR)/$(output_name) is too big" >&2; \
else \
$(CP) $(KDIR)/$(output_name) $(BIN_DIR)/$(output_name); \
fi
endef
define PatchKernelLzmaDtb
cp $(KDIR)/vmlinux$(3) $(KDIR)/vmlinux-$(1)$(3)
$(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(2).dtb ../dts/$(2).dts
$(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1)$(3) $(KDIR)/$(2).dtb
$(call CompressLzma,$(KDIR)/vmlinux-$(1)$(3),$(KDIR)/vmlinux-$(1)$(3).bin.lzma)
endef
define MkImageLzmaDtb
$(call PatchKernelLzmaDtb,$(1),$(2),$(4))
$(call MkImage,lzma,$(KDIR)/vmlinux-$(1)$(4).bin.lzma,$(KDIR)/vmlinux-$(1)$(4).uImage,$(3))
endef
define BuildFirmware/OF
$(call MkImageLzmaDtb,$(2),$(3),$(5))
$(call MkImageSysupgrade/$(1),$(1),$(2),$(4),$(6))
endef
define BuildFirmware/OF/initramfs
$(call MkImageLzmaDtb,$(2),$(3),$(4),-initramfs)
$(CP) $(KDIR)/vmlinux-$(2)-initramfs.uImage $(call imgname,$(1),$(2))-uImage.bin
endef
# Build images for default ralink layout for 4MB flash
# kernel + roots = 0x3b0000
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_4M=3866624
BuildFirmware/Default4M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_4M),$(4))
BuildFirmware/Default4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
# Build images for default ralink layout for 8MB flash
# kernel + roots = 0x7b0000
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
ralink_default_fw_size_8M=8060928
BuildFirmware/Default8M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_8M),$(4))
BuildFirmware/Default8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
ralink_default_fw_size_16M=16121856
BuildFirmware/Default16M/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(ralink_default_fw_size_16M),$(4))
BuildFirmware/Default16M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
# Build images for a custom sized flash layout
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
# $(4) = kernel + rootfs size
BuildFirmware/CustomFlash/squashfs=$(call BuildFirmware/OF,$(1),$(2),$(3),$(4),$(5),$(6))
BuildFirmware/CustomFlash/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# wrappers for boards that have 4MB and 8MB versions
define BuildFirmware/DefaultDualSize/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2)-4M,$(3)-4M)
$(call BuildFirmware/Default8M/$(1),$(1),$(2)-8M,$(3)-8M)
endef
define BuildFirmware/DefaultDualSize/initramfs
$(call BuildFirmware/OF/initramfs,$(1),$(2)-4M,$(3)-4M)
$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
endef
# Some boards need a special header inside the uImage to make them bootable
define BuildFirmware/CustomFlashFactory/squashfs
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4))
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(4),$(5),$(6))
endef
BuildFirmware/CustomFlashFactory/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# sign an image to make it work with edimax tftp recovery
define BuildFirmware/Edimax/squashfs
$(call BuildFirmware/OF,$(1),$(2),$(3),$(4))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkedimaximg -i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin \
-s $(5) -m $(6) -f $(7) -S $(8); \
fi
endef
BuildFirmware/Edimax/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# build Seama header images
define BuildFirmware/Seama/squashfs
$(call MkImageLzmaDtb,$(2),$(3),$(5))
$(eval output_name=$(IMG_PREFIX)-$(2)-$(1)-sysupgrade.bin)
cat $(KDIR)/vmlinux-$(2).bin.lzma $(KDIR)/root.$(1) > $(KDIR)/img_$(2).$(1).tmp
if [ `stat -c%s "$(KDIR)/img_$(2).$(1).tmp"` -gt $$$$(($(5) - 64)) ]; then \
echo "Warning: $(KDIR)/img_$(2).$(1).tmp is too big" >&2; \
else \
dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=64k conv=sync; \
( \
dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64`; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
) > $(KDIR)/vmlinux-$(2).tmp; \
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR)/vmlinux-$(2).tmp \
-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
$(STAGING_DIR_HOST)/bin/seama \
-s $(call imgname,$(1),$(2))-factory.bin \
-m "signature=$(4)" \
-i $(KDIR)/vmlinux-$(2).tmp.seama; \
dd if=$(KDIR)/vmlinux-$(2).bin.lzma.padded bs=1 count=`expr \`stat -c%s $(KDIR)/vmlinux-$(2).bin.lzma.padded\` - 64` of=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp; \
$(STAGING_DIR_HOST)/bin/seama \
-i $(KDIR)/vmlinux-$(2)-sysupgrade.tmp \
-m "dev=/dev/mtdblock/2" -m "type=firmware"; \
( \
dd if=$(KDIR)/vmlinux-$(2)-sysupgrade.tmp.seama; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
) > $(BIN_DIR)/$(output_name); \
fi
endef
BuildFirmware/Seama/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# sign Buffalo images
define BuildFirmware/Buffalo
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/vmlinux-$(2).uImage \
-o $(KDIR)/vmlinux-$(2).uImage.enc; \
buffalo-enc -p $(3) -v 1.76 \
-i $(KDIR)/root.$(1) \
-o $(KDIR)/root.$(2).enc; \
buffalo-tag -b $(3) -p $(3) -a ram -v 1.76 -m 1.01 \
-l mlang8 -f 1 -r EU \
-i $(KDIR)/vmlinux-$(2).uImage.enc \
-i $(KDIR)/root.$(2).enc \
-o $(call imgname,$(1),$(2))-factory-EU.bin; \
fi
endef
# sign trednet / UMedia images
define BuildFirmware/UMedia/squashfs
$(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
fix-u-media-header -T 0x46 -B $(4) \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
BuildFirmware/UMedia/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# sign dap 1350 based images
dap1350_mtd_size=7667712
define BuildFirmware/dap1350/squashfs
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2),$(3),$(dap1350_mtd_size))
-mkdapimg -s $(4) \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin
endef
BuildFirmware/dap1350/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
# Sign Poray images
define BuildFirmware/Poray4M/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkporayfw -B $(3) -F 4M \
-f $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
BuildFirmware/Poray4M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
define BuildFirmware/Poray8M/squashfs
$(call BuildFirmware/Default8M/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkporayfw -B $(3) -F 8M \
-f $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
BuildFirmware/Poray8M/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
define BuildFirmware/PorayDualSize/squashfs
$(call BuildFirmware/DefaultDualSize/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2)-4M)" ]; then \
mkporayfw -B $(3) -F 4M \
-f $(call sysupname,$(1),$(2)-4M) \
-o $(call imgname,$(1),$(2))-4M-factory.bin; \
fi
if [ -e "$(call sysupname,$(1),$(2)-8M)" ]; then \
mkporayfw -B $(3) -F 8M \
-f $(call sysupname,$(1),$(2)-8M) \
-o $(call imgname,$(1),$(2))-8M-factory.bin; \
fi
endef
BuildFirmware/PorayDualSize/initramfs=$(call BuildFirmware/DefaultDualSize/initramfs,$(1),$(2),$(3))
define BuildFirmware/Gemtek/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
mkheader_gemtek "$(call sysupname,$(1),$(2))" \
"$(call imgname,$(1),$(2))-factory.bin" $(2) || \
rm -f "$(call imgname,$(1),$(2))-factory.bin"; \
fi
endef
BuildFirmware/Gemtek/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
#
# RT288X Profiles
#
Image/Build/Profile/AR725W=$(call BuildFirmware/Gemtek/$(1),$(1),ar725w,AR725W)
# 0x790000
belkin_f5d8235v1_mtd_size=7929856
Image/Build/Profile/F5D8235V1=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v1,F5D8235_V1,$(belkin_f5d8235v1_mtd_size))
Image/Build/Profile/RTN15=$(call BuildFirmware/Default4M/$(1),$(1),rt-n15,RT-N15)
Image/Build/Profile/V11STFE=$(call BuildFirmware/Default4M/$(1),$(1),v11st-fe,V11STFE)
Image/Build/Profile/WLITX4AG300N=$(call BuildFirmware/Default4M/$(1),$(1),wli-tx4-ag300n,WLI-TX4-AG300N)
ifeq ($(SUBTARGET),rt288x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/AR725W,$(1))
$(call Image/Build/Profile/F5D8235V1,$(1))
$(call Image/Build/Profile/RTN15,$(1))
$(call Image/Build/Profile/V11STFE,$(1))
$(call Image/Build/Profile/WLITX4AG300N,$(1))
endef
endif
#
# RT305X Profiles
#
Image/Build/Profile/DIR610A1=$(call BuildFirmware/Seama/$(1),$(1),dir-610-a1,DIR-610-A1,wrgn59_dlob.hans_dir610,$(ralink_default_fw_size_4M))
edimax_3g6200n_mtd_size=3735552
Image/Build/Profile/3G6200N=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200n,3G-6200N,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G6200NL=$(call BuildFirmware/Edimax/$(1),$(1),3g-6200nl,3G-6200NL,$(edimax_3g6200n_mtd_size),CSYS,3G62,0x50000,0xc0000)
Image/Build/Profile/3G300M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),3g300m,3G300M,$(ralink_default_fw_size_4M),3G150M_SPI Kernel Image,factory)
Image/Build/Profile/AIR3GII=$(call BuildFirmware/Default4M/$(1),$(1),air3gii,AIR3GII)
define BuildFirmware/UIMAGE_8M
$(call MkCombineduImage,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M),$(7))
endef
define Image/Build/Profile/ALL02393G
$(call Image/Build/Template/$(image_type)/$(1),UIMAGE_8M,all0239-3g,ALL0239-3G,ttyS1,57600,phys)
endef
Image/Build/Profile/ALL0256N=$(call BuildFirmware/DefaultDualSize/$(1),$(1),all0256n,ALL0256N)
allnet_all5002_mtd_size=33226752
Image/Build/Profile/ALL5002=$(call BuildFirmware/CustomFlash/$(1),$(1),all5002,ALL5002,$(allnet_all5002_mtd_size))
Image/Build/Profile/ALL5003=$(call BuildFirmware/CustomFlash/$(1),$(1),all5003,ALL5003,$(allnet_all5002_mtd_size))
argus_atp52b_mtd_size=7995392
Image/Build/Profile/ARGUS_ATP52B=$(call BuildFirmware/CustomFlash/$(1),$(1),argus_atp52b,ARGUS_ATP52B,$(argus_atp52b_mtd_size))
asl26555_8mb_mtd_size=7929856
asl26555_16mb_mtd_size=16252928
define BuildFirmware/ASL26555/squashfs
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-8M,$(3)-8M,$(asl26555_8mb_mtd_size))
$(call BuildFirmware/CustomFlash/$(1),$(1),$(2)-16M,$(3)-16M,$(asl26555_16mb_mtd_size))
endef
define BuildFirmware/ASL26555/initramfs
$(call BuildFirmware/OF/initramfs,$(1),$(2)-8M,$(3)-8M)
$(call BuildFirmware/OF/initramfs,$(1),$(2)-16M,$(3)-16M)
endef
Image/Build/Profile/ASL26555=$(call BuildFirmware/ASL26555/$(1),$(1),asl26555,ASL26555)
Image/Build/Profile/AWM002EVB=$(call BuildFirmware/DefaultDualSize/$(1),$(1),awm002-evb,AWM002-EVB)
Image/Build/Profile/AWM003EVB=$(call BuildFirmware/Default8M/$(1),$(1),awm003-evb,AWM003-EVB)
Image/Build/Profile/AWAPN2403=$(call BuildFirmware/Default4M/$(1),$(1),awmapn2403,AWAPN2403)
Image/Build/Profile/BC2=$(call BuildFirmware/Default8M/$(1),$(1),bc2,BC2)
broadway_mtd_size=7929856
Image/Build/Profile/BROADWAY=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),broadway,BROADWAY,$(broadway_mtd_size),Broadway Kernel Image,factory)
Image/Build/Profile/CARAMBOLA=$(call BuildFirmware/Default8M/$(1),$(1),carambola,CARAMBOLA)
Image/Build/Profile/D105=$(call BuildFirmware/Default4M/$(1),$(1),d105,D105)
define BuildFirmware/DIR300B1/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
-mkwrgimg -s $(4) -d /dev/mtdblock/2 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory.bin
endef
BuildFirmware/DIR300B1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
Image/Build/Profile/DIR-300-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
Image/Build/Profile/DIR-600-B1=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
Image/Build/Profile/DIR-600-B2=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b)
Image/Build/Profile/DIR-615-D=$(call BuildFirmware/DIR300B1/$(1),$(1),dir-615-d,DIR-615-D,wrgn23_dlwbr_dir615d)
Image/Build/Profile/DIR-620-A1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-a1,DIR-620-A1)
Image/Build/Profile/DIR-620-D1=$(call BuildFirmware/Default8M/$(1),$(1),dir-620-d1,DIR-620-D1)
define BuildFirmware/DIR615H1/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),dir-615-h1,DIR-615-H1)
-mksenaofw -e $(call sysupname,$(1),dir-615-h1) \
-o $(call imgname,$(1),dir-615-h1)-factory.bin \
-r 0x218 -p 0x30 -t 3
endef
BuildFirmware/DIR615H1/initramfs=$(call BuildFirmware/OF/initramfs,$(1),dir-615-h1,DIR-615-H1)
Image/Build/Profile/DIR615H1=$(call BuildFirmware/DIR615H1/$(1),$(1))
Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-1350,RT3052-AP-DAP1350-3)
Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
define BuildFirmware/DCS930/squashfs
$(call BuildFirmware/Default4M/squashfs,squashfs,$(2),$(3))
dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/image.$(2).combined bs=1048512 count=1 conv=sync
cat $(KDIR)/root.squashfs >> $(KDIR)/image.$(2).combined
$(call MkImage,lzma,$(KDIR)/image.$(2).combined,$(KDIR)/image.$(2))
$(call prepare_generic_squashfs,$(KDIR)/image.$(2))
if [ `stat -c%s "$(KDIR)/image.$(2)"` -gt $(ralink_default_fw_size_4M) ]; then \
echo "Warning: $(KDIR)/image.$(2) is too big" >&2; \
else \
dd if=$(KDIR)/image.$(2) of=$(KDIR)/dcs.tmp bs=64K count=5 conv=sync ;\
cat $(KDIR)/image.$(2) >> $(KDIR)/dcs.tmp ; \
dd if=$(KDIR)/dcs.tmp of=$(call imgname,$(1),$(2))-factory.bin bs=4096k count=1 conv=sync ;\
$(STAGING_DIR_HOST)/bin/mkdcs932 $(call imgname,$(1),$(2))-factory.bin ; \
fi
endef
BuildFirmware/DCS930/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
Image/Build/Profile/DCS930=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930,DCS-930)
Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)
Image/Build/Profile/HW550-3G=$(call BuildFirmware/Default8M/$(1),$(1),hw550-3g,HW550-3G)
belkin_f5d8235v2_mtd_size=7929856
Image/Build/Profile/F5D8235V2=$(call BuildFirmware/CustomFlash/$(1),$(1),f5d8235v2,F5D8235_V2,$(belkin_f5d8235v2_mtd_size))
# 0x770000
belkin_f7c027_mtd_size=7798784
Image/Build/Profile/F7C027=$(call BuildFirmware/CustomFlash/$(1),$(1),belkinf7c027,F7C027,$(belkin_f7c027_mtd_size))
Image/Build/Profile/FONERA20N=$(call BuildFirmware/Edimax/$(1),$(1),fonera20n,FONERA20N,$(ralink_default_fw_size_8M),RSDK,NL1T,0x50000,0xc0000)
Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT-N13U)
#Image/Build/Profile/HG255D=$(call BuildFirmware/Default16M/$(1),$(1),hg255d,HG255D)
Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5)
Image/Build/Profile/IP2202=$(call BuildFirmware/Default8M/$(1),$(1),ip2202,IP2202)
BuildFirmware/HLKRM04/squashfs=$(call BuildFirmware/Default4M/squashfs,$(1),$(2),$(3),$(4))
define BuildFirmware/HLKRM04/initramfs
$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3),$(4))
#mkhilinkfw -e -i$(call imgname,$(1),$(2))-uImage.bin -o $(call imgname,$(1),$(2))-factory.bin;
endef
Image/Build/Profile/HLKRM04=$(call BuildFirmware/HLKRM04/$(1),$(1),hlk-rm04,HLKRM04,HLK-RM02)
Image/Build/Profile/HT-TM02=$(call BuildFirmware/Default8M/$(1),$(1),ht-tm02,HT-TM02)
Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3)
Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4)
Image/Build/Profile/MOFI3500-3GN=$(call BuildFirmware/Default8M/$(1),$(1),mofi3500-3gn,MOFI3500-3GN)
# Kernel name should be "Linux Kernel Image" to make the OpenWrt image installable from factory Web UI
Image/Build/Profile/MPRA1=$(call BuildFirmware/Default4M/$(1),$(1),mpr-a1,MPRA1,Linux Kernel Image)
Image/Build/Profile/MPRA2=$(call BuildFirmware/Default8M/$(1),$(1),mpr-a2,MPRA2,Linux Kernel Image)
Image/Build/Profile/DIR-300-B7=$(call BuildFirmware/Default4M/$(1),$(1),dir-300-b7,DIR-300-B7)
Image/Build/Profile/DIR-320-B1=$(call BuildFirmware/Default8M/$(1),$(1),dir-320-b1,DIR-320-B1)
Image/Build/Profile/NBG-419N=$(call BuildFirmware/Default4M/$(1),$(1),nbg-419n,NBG-419N)
Image/Build/Profile/MZKW300NH2=$(call BuildFirmware/Edimax/$(1),$(1),mzk-w300nh2,MZK-W300NH2,$(mzkw300nh2_mtd_size),CSYS,RN52,0x50000,0xc0000)
Image/Build/Profile/NCS601W=$(call BuildFirmware/Default8M/$(1),$(1),ncs601W,NCS601W)
nw718_mtd_size=3801088
Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw718m,NW718,$(nw718_mtd_size),ARA1B4NCRNW718;1,factory)
Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG)
Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W)
Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004)
Image/Build/Profile/PX4885=$(call BuildFirmware/Default4M/$(1),$(1),px4885,PX4885)
Image/Build/Profile/RTG32B1=$(call BuildFirmware/Default4M/$(1),$(1),rt-g32-b1,RT-G32-B1)
Image/Build/Profile/RTN10PLUS=$(call BuildFirmware/Default4M/$(1),$(1),rt-n10-plus,RT-N10-PLUS)
Image/Build/Profile/RUT5XX=$(call BuildFirmware/Default8M/$(1),$(1),rut5xx,RUT5XX)
Image/Build/Profile/SL-R7205=$(call BuildFirmware/Default4M/$(1),$(1),sl-r7205,SL-R7205)
Image/Build/Profile/V22RW-2X2=$(call BuildFirmware/Default4M/$(1),$(1),v22rw-2x2,V22RW-2X2)
Image/Build/Profile/VOCORE=$(call BuildFirmware/Default8M/$(1),$(1),vocore,VOCORE)
Image/Build/Profile/W150M=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w150m,W150M,$(ralink_default_fw_size_4M),W150M Kernel Image,factory)
Image/Build/Profile/W306R_V20=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),w306r-v20,W306R_V20,$(ralink_default_fw_size_4M),linkn Kernel Image,factory)
Image/Build/Profile/W502U=$(call BuildFirmware/Default8M/$(1),$(1),w502u,W502U)
Image/Build/Profile/WCR150GN=$(call BuildFirmware/Default4M/$(1),$(1),wcr150gn,WCR150GN)
buffalo_whrg300n_mtd_size=3801088
define BuildFirmware/WHRG300N/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),whr-g300n,WHR-G300N)
# the following line has a bad argument 3 ... the old Makefile was already broken
$(call BuildFirmware/Buffalo,$(1),whr-g300n,whr-g300n)
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \
dd bs=512 count=1 conv=sync; \
dd if=$(call sysupname,$(1),whr-g300n); \
) > $(KDIR)/whr-g300n-tftp.tmp && \
buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \
-o $(call imgname,$(1),whr-g300n)-tftp.bin; \
fi
endef
BuildFirmware/WHRG300N/initramfs=$(call BuildFirmware/OF/initramfs,$(1),whr-g300n,WHR-G300N)
Image/Build/Profile/WHRG300N=$(call BuildFirmware/WHRG300N/$(1),$(1))
Image/Build/Profile/WIZARD8800=$(call BuildFirmware/Default8M/$(1),$(1),wizard-8800,WIZARD8800,Linux Kernel Image)
Image/Build/Profile/WL_330N=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n,WL_330N)
Image/Build/Profile/WL_330N3G=$(call BuildFirmware/Default4M/$(1),$(1),wl-330n3g,WL_330N3G)
kernel_size_wl341v3=917504
rootfs_size_wl341v3=2949120
define BuildFirmware/WL341V3/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),wl341v3,WL341V3)
# This code looks broken and really needs to be converted to C
if [ -e "$(call sysupname,$(1),$(2))" ]; then \
( \
dd if=/dev/zero bs=195936 count=1; \
echo "1.01"; \
dd if=/dev/zero bs=581 count=1; \
echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \
dd if=/dev/zero bs=65552 count=1; \
dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \
dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \
dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \
echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \
) > $(call imgname,$(1),$(2))-factory.bin; \
fi
endef
BuildFirmware/WL341V3/initramfs=$(call BuildFirmware/OF/initramfs,$(1),wl341v3,WL341V3)
Image/Build/Profile/WL341V3=$(call BuildFirmware/WL341V3/$(1),$(1))
Image/Build/Profile/WL-351=$(call BuildFirmware/Default4M/$(1),$(1),wl-351,WL-351)
define BuildFirmware/WNCE2001/squashfs
$(call BuildFirmware/Default4M/$(1),$(1),$(2),$(3))
-mkdapimg -s RT3052-AP-WNCE2001-3 -r WW -v 1.0.0.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory-worldwide.bin
-mkdapimg -s RT3052-AP-WNCE2001-3 -r NA -v 1.0.0.99 \
-i $(call sysupname,$(1),$(2)) \
-o $(call imgname,$(1),$(2))-factory-northamerica.bin
endef
BuildFirmware/WNCE2001/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
Image/Build/Profile/WNCE2001=$(call BuildFirmware/WNCE2001/$(1),$(1),wnce2001,WNCE2001)
Image/Build/Profile/WR512-3GN=$(call BuildFirmware/DefaultDualSize/$(1),$(1),wr512-3ng,WR512-3GN)
Image/Build/Profile/UR-326N4G=$(call BuildFirmware/Default4M/$(1),$(1),ur-326n4g,UR-326N4G)
Image/Build/Profile/UR-336UN=$(call BuildFirmware/Default8M/$(1),$(1),ur-336un,UR-336UN)
Image/Build/Profile/WR6202=$(call BuildFirmware/Default8M/$(1),$(1),wr6202,WR6202)
Image/Build/Profile/X5=$(call BuildFirmware/Poray8M/$(1),$(1),x5,X5)
Image/Build/Profile/X8=$(call BuildFirmware/Poray8M/$(1),$(1),x8,X8)
Image/Build/Profile/XDXRN502J=$(call BuildFirmware/Default4M/$(1),$(1),xdxrn502j,XDXRN502J)
ifeq ($(SUBTARGET),rt305x)
define Image/Build/Profile/Default
$(call Image/Build/Profile/3G6200N,$(1))
$(call Image/Build/Profile/3G6200NL,$(1))
$(call Image/Build/Profile/3G300M,$(1))
$(call Image/Build/Profile/AIR3GII,$(1))
$(call Image/Build/Profile/ALL02393G,$(1))
$(call Image/Build/Profile/ALL0256N,$(1))
$(call Image/Build/Profile/ALL5002,$(1))
$(call Image/Build/Profile/ALL5003,$(1))
$(call Image/Build/Profile/ARGUS_ATP52B,$(1))
$(call Image/Build/Profile/ASL26555,$(1))
$(call Image/Build/Profile/AWM002EVB,$(1))
$(call Image/Build/Profile/AWAPN2403,$(1))
$(call Image/Build/Profile/BC2,$(1))
$(call Image/Build/Profile/BROADWAY,$(1))
$(call Image/Build/Profile/CARAMBOLA,$(1))
$(call Image/Build/Profile/D105,$(1))
$(call Image/Build/Profile/DIR-300-B1,$(1))
$(call Image/Build/Profile/DIR-600-B1,$(1))
$(call Image/Build/Profile/DIR-300-B7,$(1))
$(call Image/Build/Profile/DIR-320-B1,$(1))
$(call Image/Build/Profile/DIR-600-B2,$(1))
$(call Image/Build/Profile/DIR610A1,$(1))
$(call Image/Build/Profile/DIR-615-D,$(1))
$(call Image/Build/Profile/DIR-620-A1,$(1))
$(call Image/Build/Profile/DIR-620-D1,$(1))
$(call Image/Build/Profile/DIR615H1,$(1))
$(call Image/Build/Profile/DAP1350,$(1))
$(call Image/Build/Profile/DAP1350WW,$(1))
$(call Image/Build/Profile/DCS930,$(1))
$(call Image/Build/Profile/ESR-9753,$(1))
$(call Image/Build/Profile/F7C027,$(1))
$(call Image/Build/Profile/F5D8235V2,$(1))
$(call Image/Build/Profile/FONERA20N,$(1))
$(call Image/Build/Profile/FREESTATION5,$(1))
# $(call Image/Build/Profile/HG255D,$(1))
$(call Image/Build/Profile/HLKRM04,$(1))
$(call Image/Build/Profile/HT-TM02,$(1))
$(call Image/Build/Profile/HW550-3G,$(1))
$(call Image/Build/Profile/IP2202,$(1))
$(call Image/Build/Profile/M3,$(1))
$(call Image/Build/Profile/M4,$(1))
$(call Image/Build/Profile/MOFI3500-3GN,$(1))
$(call Image/Build/Profile/MPRA1,$(1))
$(call Image/Build/Profile/MPRA2,$(1))
$(call Image/Build/Profile/MZKW300NH2,$(1))
$(call Image/Build/Profile/NBG-419N,$(1))
$(call Image/Build/Profile/NCS601W,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNI-EMB,$(1))
$(call Image/Build/Profile/OMNI-PLUG,$(1))
$(call Image/Build/Profile/PSR-680W,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/PX4885,$(1))
$(call Image/Build/Profile/RTG32B1,$(1))
$(call Image/Build/Profile/RTN10PLUS,$(1))
$(call Image/Build/Profile/RT-N13U,$(1))
$(call Image/Build/Profile/RUT5XX,$(1))
$(call Image/Build/Profile/SL-R7205,$(1))
$(call Image/Build/Profile/UR-326N4G,$(1))
$(call Image/Build/Profile/V22RW-2X2,$(1))
$(call Image/Build/Profile/VOCORE,$(1))
$(call Image/Build/Profile/W150M,$(1))
$(call Image/Build/Profile/W306R_V20,$(1))
$(call Image/Build/Profile/W502U,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WIZARD8800,$(1))
$(call Image/Build/Profile/WL_330N,$(1))
$(call Image/Build/Profile/WL_330N3G,$(1))
$(call Image/Build/Profile/WL341V3,$(1))
$(call Image/Build/Profile/WL-351,$(1))
$(call Image/Build/Profile/WNCE2001,$(1))
$(call Image/Build/Profile/WR512-3GN,$(1))
$(call Image/Build/Profile/WR6202,$(1))
$(call Image/Build/Profile/X5,$(1))
$(call Image/Build/Profile/X8,$(1))
$(call Image/Build/Profile/XDXRN502J,$(1))
endef
endif
#
# RT3662/RT3883 Profiles
#
# $(1) = squashfs/initramfs
# $(2) = lowercase board name
# $(3) = dts file
# $(4) = kernel size
# $(5) = rootfs size
# $(6) = signature
# $(7) = model
# $(8) = flash address
# $(9) = start address
define BuildFirmware/EdimaxCombined/squashfs
$(call PatchKernelLzmaDtb,$(2),$(3))
$(call MkImage,lzma,$(KDIR)/vmlinux-$(2).bin.lzma,$(KDIR)/vmlinux-$(2).bin.uImage)
if [ `stat -c%s "$(KDIR)/vmlinux-$(2).bin.uImage"` -gt `expr $(4) - 20` ]; then \
echo "Warning: $(KDIR)/vmlinux-$(2).bin.uImage is too big" >&2; \
exit 1; \
else if [ `stat -c%s "$(KDIR)/root.$(1)"` -gt $(5) ]; then \
echo "Warning: $(KDIR)/root.$(1) is too big" >&2; \
exit 1; \
else \
( dd if=$(KDIR)/vmlinux-$(2).bin.uImage bs=`expr $(4) - 20` conv=sync ; dd if=$(KDIR)/root.$(1) ) > $(KDIR)/vmlinux-$(2).bin.uImage.combined ; \
fi ; fi
mkedimaximg -i "$(KDIR)/vmlinux-$(2).bin.uImage.combined" \
-o $(call imgname,$(1),$(2)).bin \
-s $(6) -m $(7) -f $(8) -S $(9)
endef
Image/Build/Profile/CYSWR1100=$(call BuildFirmware/Seama/$(1),$(1),cy-swr1100,CY-SWR1100,wrgnd10_samsung_ss815,$(ralink_default_fw_size_8M))
Image/Build/Profile/DIR645=$(call BuildFirmware/Seama/$(1),$(1),dir-645,DIR-645,wrgn39_dlob.hans_dir645,$(ralink_default_fw_size_8M))
omniembhpm_mtd_size=16449536
Image/Build/Profile/OMNIEMBHPM=$(call BuildFirmware/CustomFlash/$(1),$(1),omni-emb-hpm,OMNI-EMB-HPM,$(omniembhpm_mtd_size))
define BuildFirmware/RTN56U/squashfs
$(call BuildFirmware/Default8M/$(1),$(1),rt-n56u,RTN56U)
-mkrtn56uimg -s $(call sysupname,$(1),rt-n56u)
-cp $(call sysupname,$(1),rt-n56u) $(call imgname,$(1),rt-n56u)-factory.bin
-mkrtn56uimg -f $(call imgname,$(1),rt-n56u)-factory.bin
endef
Image/Build/Profile/RTN56U=$(call BuildFirmware/RTN56U/$(1),$(1),rt-n56u,RTN56U)
Image/Build/Profile/TEW691GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-691gr,TEW-691GR,0x026910)
Image/Build/Profile/TEW692GR=$(call BuildFirmware/UMedia/$(1),$(1),tew-692gr,TEW-692GR,0x026920)
kernel_size_BR6475ND:=2097152
rootfs_size_BR6475ND:=5832704
Image/Build/Profile/BR6475ND=$(call BuildFirmware/EdimaxCombined/$(1),$(1),br-6475nd,BR-6475ND,$(kernel_size_BR6475ND),$(rootfs_size_BR6475ND),CSYS,RN54,0x70000,0x01100000)
ifeq ($(SUBTARGET),rt3883)
define Image/Build/Profile/Default
$(call Image/Build/Profile/CYSWR1100,$(1))
$(call Image/Build/Profile/DIR645,$(1))
$(call Image/Build/Profile/OMNIEMBHPM,$(1))
$(call Image/Build/Profile/RTN56U,$(1))
$(call Image/Build/Profile/BR6475ND,$(1))
$(call Image/Build/Profile/TEW691GR,$(1))
$(call Image/Build/Profile/TEW692GR,$(1))
endef
endif
#
# MT7620A Profiles
#
Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7620a)
Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
Image/Build/Profile/MT7620a_V22SG=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_v22sg,MT7620a_V22SG)
Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
whr_300hp2_mtd_size=7012352
Image/Build/Profile/WHR300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
Image/Build/Profile/WHR600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
whr_1166d_mtd_size=15400960
Image/Build/Profile/WHR1166D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-1166d,WHR-1166D,$(whr_1166hd_mtd_size))
dlink810l_mtd_size=6881280
Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
na930_mtd_size=20971520
Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size))
Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP)
Image/Build/Profile/Y1=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1,Y1)
Image/Build/Profile/Y1S=$(call BuildFirmware/Default16M/$(1),$(1),Lenovo-y1s,Y1S)
ifeq ($(SUBTARGET),mt7620a)
define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7620a,$(1))
$(call Image/Build/Profile/MT7620a_MT7610e,$(1))
$(call Image/Build/Profile/MT7620a_MT7530,$(1))
$(call Image/Build/Profile/MT7620a_V22SG,$(1))
$(call Image/Build/Profile/RP-N53,$(1))
$(call Image/Build/Profile/DIR-810L,$(1))
$(call Image/Build/Profile/WHR300HP2,$(1))
$(call Image/Build/Profile/WHR600D,$(1))
$(call Image/Build/Profile/WHR1166D,$(1))
$(call Image/Build/Profile/MZK-750DHP,$(1))
$(call Image/Build/Profile/NA930,$(1))
$(call Image/Build/Profile/Y1,$(1))
$(call Image/Build/Profile/Y1S,$(1))
endef
endif
#
# MT7620N Profiles
#
Image/Build/Profile/MLW221=$(call BuildFirmware/Default16M/$(1),$(1),mlw221,MLW221)
Image/Build/Profile/WMR300=$(call BuildFirmware/Default8M/$(1),$(1),wmr-300,WMR300)
Image/Build/Profile/RT-N14U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n14u,RT-N14U)
Image/Build/Profile/WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),wr8305rt,WR8305RT)
Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WRTNODE)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
ifeq ($(SUBTARGET),mt7620n)
define Image/Build/Profile/Default
$(call Image/Build/Profile/MLW221,$(1))
$(call Image/Build/Profile/WMR300,$(1))
$(call Image/Build/Profile/RT-N14U,$(1))
$(call Image/Build/Profile/WR8305RT,$(1))
$(call Image/Build/Profile/WRTNODE,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
endef
endif
#
# MT7621 Profiles
#
Image/Build/Profile/MT7621=$(call BuildFirmware/Default4M/$(1),$(1),mt7621,MT7621)
ifeq ($(SUBTARGET),mt7621)
define Image/Build/Profile/Default
$(call Image/Build/Profile/MT7621,$(1))
endef
endif
#
# Generic Targets
#
define Image/BuildKernel
cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf
cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin
$(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma)
cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
cp $(KDIR)/vmlinux-initramfs.elf $(BIN_DIR)/$(VMLINUX)-initramfs.elf
cp $(KDIR)/vmlinux-initramfs $(BIN_DIR)/$(VMLINUX)-initramfs.bin
$(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma)
$(call MkImage,lzma,$(KDIR)/vmlinux-initramfs.bin.lzma,$(KDIR)/uImage-initramfs.lzma)
cp $(KDIR)/uImage-initramfs.lzma $(BIN_DIR)/$(UIMAGE)-initramfs.bin
endif
$(call Image/Build/Initramfs)
endef
define Image/Build
$(call Image/Build/$(1))
dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync
$(call Image/Build/Profile/$(PROFILE),$(1))
endef
$(eval $(call BuildImage))
Reference in a new issue View git blame Copy permalink