openwrtv3/target/linux/ramips/files/arch/mips/ralink/rt288x/mach-wzr-agl300nh.c
Gabor Juhos af9f40e60d ramips: update mips multi-machine stuff
SVN-Revision: 19400
2010-01-30 15:25:03 +00:00

105 lines
2.4 KiB
C

/*
* Buffalo WZR-AGL300NH board support
*
* Copyright (C) 2010 Joonas Lahtinen <joonas.lahtinen@gmail.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/leds.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev_gpio_leds.h>
#include <asm/mach-ralink/rt288x.h>
#include <asm/mach-ralink/rt288x_regs.h>
#include "devices.h"
#if 0
#define WZR_AGL300NH_GPIO_LED_POWER XX
#define WZR_AGL300NH_GPIO_BUTTON_AOSS XX
#define WZR_AGL300NH_GPIO_BUTTON_RESET XX
#endif // 0
#ifdef CONFIG_MTD_PARTITIONS
/*
From stock firmware:
mtd0: 00030000 00010000 "uboot"
mtd1: 00010000 00010000 "uboot_environ"
mtd2: 00010000 00010000 "factory_default"
mtd3: 000b0000 00010000 "linux"
mtd4: 002f0000 00010000 "rootfs"
mtd5: 00010000 00010000 "user_property"
*/
static struct mtd_partition wzr_agl300nh_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = 0x030000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "uboot_environ",
.offset = 0x030000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory_default",
.offset = 0x040000,
.size = 0x010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "linux",
.offset = 0x050000,
.size = 0x0b0000,
}, {
.name = "rootfs",
.offset = 0x100000,
.size = 0x2f0000,
}, {
.name = "user_property",
.offset = 0x3f0000,
.size = 0x010000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data wzr_agl300nh_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(wzr_agl300nh_partitions),
.parts = wzr_agl300nh_partitions,
#endif
};
#if 0
static struct gpio_led wzr_agl300nh_leds_gpio[] __initdata = {
{
.name = "wzr-agl300nh:green:power",
.gpio = WZR_AGL300NH_GPIO_LED_POWER,
.active_low = ??,
}
};
#endif
static void __init wzr_agl300nh_init(void)
{
rt288x_gpio_init(RT2880_GPIO_MODE_UART0);
rt288x_register_flash(0, &wzr_agl300nh_flash_data);
/*
ramips_register_gpio_leds(-1, ARRAY_SIZE(wzr_agl300nh_leds_gpio),
wzr_agl300nh_leds_gpio);
*/
}
MIPS_MACHINE(RAMIPS_MACH_WZR_AGL300NH, "WZR-AGL300NH",
"Buffalo WZR-AGL300NH", wzr_agl300nh_init);