KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
No description
38673 commits 1 branch 0 tags 154 MiB
C 66.6%
Makefile 16.8%
Shell 8%
Roff 2.7%
Perl 2%
Other 3.8%
Find a file
Kyson Lok abbfcc8525 ramips: add support for GL-inet GL-MT300N-V2 
This patch adds supports for the GL-inet GL-MT300N-V2.

Specification:
- SoC: MediaTek MT7628AN
- Flash: 16 MiB (W25Q128FVSG)
- RAM: 128 MiB DDR
- Ethernet: 1 x WAN (100 Mbps) and 1 x LAN (100 Mbps)
- USB: 1 x USB 2.0 port
- Button: 1 x switch button, 1 x reset button
- LED: 3 x LEDS (system power led is not GPIO controller)
- UART: 1 x UART on PCB (JP1: 3.3V, RX, TX, GND)

Installation through Luci:
- The original firmware is LEDE, so both LuCI or sysupgrade can be used.
- Do not keep settings, for sysupgrade please use the -n option.

Installation through bootloader webserver:
- Plug power and hold reset button until red LED blink to bright.
- Install sysupgrade image using web interface on 192.168.1.1.

Signed-off-by: Kyson Lok <kysonlok@gmail.com>
[match maximum image size with firmware partition]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-05-26 08:04:15 +02:00
.github github: include pull request template 2017-03-12 17:38:31 +01:00
config kernel: enable CRASH_DUMP on supported platforms 2017-05-20 00:26:03 +02:00
include build: fix QUILT related overrides 2017-05-25 20:42:45 +02:00
package iptables: fix typos in 600-shared-libext.patch (FS#711) 2017-05-25 19:30:36 +02:00
scripts scripts/download.pl: print the command used to download files 2017-05-25 19:01:07 +02:00
target ramips: add support for GL-inet GL-MT300N-V2 2017-05-26 08:04:15 +02:00
toolchain gcc: fix documentation entries added by 910-mbsd_multi.patch 2017-05-25 19:01:07 +02:00
tools flex: update to 2.6.4 (FS#809) 2017-05-26 07:53:03 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore gitignore: add /overlay 2017-01-15 18:16:29 +01:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default Add video feed to feeds.conf.default 2017-01-25 16:04:39 +01:00
LICENSE finally move buildroot-ng to trunk 2016-03-20 17:29:15 +01:00
Makefile build: prepare config.seed before package compilation 2017-03-18 12:08:04 +01:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk rules.mk: make PKG_CONFIG_DEPENDS properly track string values 2017-02-27 23:46:53 +01:00

README 

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org