openwrtv3/target/linux/ath79/dts/ar7100.dtsi
Rafał Miłecki 66c8afd115 ath79: relicense DTS files to the GPL 2.0+ / MIT
Some maintainers prefer DTS files licensed under permissive license like
MIT / BSD. As all DT bindings should be OS independent and DTS files are
pretty separated from Linux code it probably makes sense to share them
across projects.

The safest solution is to use dual licensing: that way it stays clear
these files can be used in GPL projects without depending on current
belief of licenses compatibility.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: John Crispin <john@phrozen.org>
2018-05-07 10:31:35 +02:00

204 lines
3.8 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include <dt-bindings/clock/ath79-clk.h>
#include "ath79.dtsi"
/ {
compatible = "qca,ar7100";
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "mips,mips24Kc";
clocks = <&pll ATH79_CLK_CPU>;
reg = <0>;
};
};
ahb {
apb {
ddr_ctrl: memory-controller@18000000 {
compatible = "qca,ar7100-ddr-controller";
reg = <0x18000000 0x100>;
#qca,ddr-wb-channel-cells = <1>;
};
uart: uart@18020000 {
compatible = "ns16550a";
reg = <0x18020000 0x20>;
interrupts = <3>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "uart";
reg-io-width = <4>;
reg-shift = <2>;
no-loopback-test;
status = "disabled";
};
usb_phy: usb-phy@18030000 {
compatible = "qca,ar7100-usb-phy";
reg = <0x18030000 0x10>;
reset-names = "usb-phy", "usb-host", "usb-ohci-dll";
resets = <&rst 4>, <&rst 5>, <&rst 6>;
#phy-cells = <0>;
status = "disabled";
};
gpio: gpio@18040000 {
compatible = "qca,ar7100-gpio";
reg = <0x18040000 0x30>;
interrupts = <2>;
ngpios = <16>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
pll: pll-controller@18050000 {
compatible = "qca,ar7100-pll", "syscon";
reg = <0x18050000 0x20>;
clock-names = "ref";
/* The board must provides the ref clock */
#clock-cells = <1>;
clock-output-names = "cpu", "ddr", "ahb";
};
wdt: wdt@18060008 {
compatible = "qca,ar7130-wdt";
reg = <0x18060008 0x8>;
interrupts = <4>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "wdt";
};
rst: reset-controller@18060024 {
compatible = "qca,ar7100-reset";
reg = <0x18060024 0x4>;
#reset-cells = <1>;
};
pcie0: pcie-controller@180c0000 {
compatible = "qca,ar7100-pci";
#address-cells = <3>;
#size-cells = <2>;
bus-range = <0x0 0x0>;
reg = <0x17010000 0x100>;
reg-names = "cfg_base";
ranges = <0x2000000 0 0x10000000 0x10000000 0 0x07000000 /* pci memory */
0x1000000 0 0x00000000 0x0000000 0 0x000001>; /* io space */
interrupt-parent = <&cpuintc>;
interrupts = <2>;
interrupt-controller;
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 1>;
interrupt-map = <0 0 0 0 &pcie0 0>;
status = "disabled";
};
};
};
usb2: usb@1b000000 {
compatible = "generic-ehci";
reg = <0x1b000000 0x1000>;
interrupt-parent = <&cpuintc>;
interrupts = <3>;
phy-names = "usb-phy";
phys = <&usb_phy>;
has-synopsys-hc-bug;
status = "disabled";
};
usb1: usb@1c000000 {
compatible = "generic-ohci";
reg = <0x1c000000 0x1000>;
interrupt-parent = <&miscintc>;
interrupts = <6>;
phy-names = "usb-phy";
phys = <&usb_phy>;
status = "disabled";
};
spi: spi@1f000000 {
compatible = "qca,ar7100-spi";
reg = <0x1f000000 0x10>;
clocks = <&pll ATH79_CLK_AHB>;
clock-names = "ahb";
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
};
&cpuintc {
qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>;
qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>,
<&ddr_ctrl 0>, <&ddr_ctrl 1>;
};
&miscintc {
compatible = "qca,ar7100-misc-intc";
};
&eth0 {
compatible = "qca,ar7100-eth";
reg = <0x19000000 0x200
0x18070000 0x4>;
pll-data = <0x00110000 0x00001099 0x00991099>;
pll-reg = <0x4 0x10 17>;
pll-handle = <&pll>;
phy-mode = "rgmii";
resets = <&rst 8>, <&rst 9>;
reset-names = "phy", "mac";
};
&mdio1 {
builtin-switch;
};
&eth1 {
compatible = "qca,ar7100-eth";
reg = <0x1a000000 0x200
0x18070004 0x4>;
pll-data = <0x00110000 0x00001099 0x00991099>;
pll-reg = <0x4 0x14 19>;
pll-handle = <&pll>;
phy-mode = "rgmii";
resets = <&rst 12>, <&rst 13>;
reset-names = "phy", "mac";
};