KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
Mathias Kresin 0547b3ca64 lantiq: fix lantiq-dsl output spam 
In case the adsl/vdsl service is disabled intentional, the output is
cluttered with the following message multiple times if the status of
the dsl line is queried:

  killall: vdsl_cpe_control: no process killed

If the dsl line status is queried by LuCI, the logfile is spammed with
the message.

Fix the issue by using killall in quite mode. In quite mode killall
still returns a non-zero value if the to be killed process can not be
found so that existing logic based on the return value still works.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-11 09:31:57 +02:00

749 lines
16 KiB
Bash
Executable file
Raw Blame History

#!/bin/sh /etc/rc.common
# Copyright (C) 2012-2014 OpenWrt.org
if [ "$( which vdsl_cpe_control )" ]; then
XDSL_CTRL=vdsl_cpe_control
else
XDSL_CTRL=dsl_cpe_control
fi
#
# Basic functions to send CLI commands to the vdsl_cpe_control daemon
#
dsl_cmd() {
killall -q -0 ${XDSL_CTRL} && (
lock /var/lock/dsl_pipe
echo "$@" > /tmp/pipe/dsl_cpe0_cmd
cat /tmp/pipe/dsl_cpe0_ack
lock -u /var/lock/dsl_pipe
)
}
dsl_val() {
echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
}
dsl_string() {
echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
}
#
# Simple divide by 10 routine to cope with one decimal place
#
dbt() {
local a=$(expr $1 / 10)
local b=$(expr $1 % 10)
echo "${a}.${b#-}"
}
#
# Take a number and convert to k or meg
#
scale() {
local val=$1
local a
local b
if [ "$val" -gt 1000000 ]; then
a=$(expr $val / 1000)
b=$(expr $a % 1000)
a=$(expr $a / 1000)
printf "%d.%03d Mb" ${a} ${b}
elif [ "$val" -gt 1000 ]; then
a=$(expr $val / 1000)
printf "%d Kb" ${a}
else
echo "${val} b"
fi
}
scale_latency() {
local val=$1
local a
local b
a=$(expr $val / 100)
b=$(expr $val % 100)
printf "%d.%d ms" ${a} ${b}
}
#
# convert vendorid into human readable form
#
parse_vendorid() {
local val=$1
local name
local version
case "$val" in
B5,00,41,4C,43,42*)
name="Alcatel"
version=${val##*B5,00,41,4C,43,42,}
;;
B5,00,41,4E,44,56*)
name="Analog Devices"
version=${val##*B5,00,41,4E,44,56,}
;;
B5,00,42,44,43,4D*)
name="Broadcom"
version=${val##*B5,00,42,44,43,4D,}
;;
B5,00,43,45,4E,54*)
name="Centillium"
version=${val##*B5,00,43,45,4E,54,}
;;
B5,00,47,53,50,4E*)
name="Globespan"
version=${val##*B5,00,47,53,50,4E,}
;;
B5,00,49,4B,4E,53*)
name="Ikanos"
version=${val##*B5,00,49,4B,4E,53,}
;;
B5,00,49,46,54,4E*)
name="Infineon"
version=${val##*B5,00,49,46,54,4E,}
;;
B5,00,54,53,54,43*)
name="Texas Instruments"
version=${val##*B5,00,54,53,54,43,}
;;
B5,00,54,4D,4D,42*)
name="Thomson MultiMedia Broadband"
version=${val##*B5,00,54,4D,4D,42,}
;;
B5,00,54,43,54,4E*)
name="Trend Chip Technologies"
version=${val##*B5,00,54,43,54,4E,}
;;
B5,00,53,54,4D,49*)
name="ST Micro"
version=${val##*B5,00,53,54,4D,49,}
;;
esac
[ -n "$name" ] && {
val="$name"
[ "$version" != "00,00" ] && val="$(printf "%s %d.%d" "$val" 0x${version//,/ 0x})"
}
echo "$val"
}
#
# Read the data rates for both directions
#
data_rates() {
local csg
local dru
local drd
local sdru
local sdrd
csg=$(dsl_cmd g997csg 0 1)
drd=$(dsl_val "$csg" ActualDataRate)
csg=$(dsl_cmd g997csg 0 0)
dru=$(dsl_val "$csg" ActualDataRate)
[ -z "$drd" ] && drd=0
[ -z "$dru" ] && dru=0
sdrd=$(scale $drd)
sdru=$(scale $dru)
if [ "$action" = "lucistat" ]; then
echo "dsl.data_rate_down=$drd"
echo "dsl.data_rate_up=$dru"
echo "dsl.data_rate_down_s=\"$sdrd\""
echo "dsl.data_rate_up_s=\"$sdru\""
else
echo "Data Rate: Down: ${sdrd}/s / Up: ${sdru}/s"
fi
}
#
# Chipset
#
chipset() {
local vig
local cs
local csv
vig=$(dsl_cmd vig)
cs=$(dsl_val "$vig" DSL_ChipSetType)
csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
if [ "$action" = "lucistat" ]; then
echo "dsl.chipset=\"${cs} ${csv}\""
echo "dsl.firmware_version=\"${csfw}\""
echo "dsl.api_version=\"${csapi}\""
else
echo "Chipset: ${cs} ${csv}"
echo "Firmware Version: ${csfw}"
echo "API Version: ${csapi}"
fi
}
#
# Vendor information
#
vendor() {
local lig
local vid
local svid
lig=$(dsl_cmd g997lig 1)
vid=$(dsl_string "$lig" G994VendorID)
svid=$(dsl_string "$lig" SystemVendorID)
vid=$(parse_vendorid $vid)
svid=$(parse_vendorid $svid)
if [ "$action" = "lucistat" ]; then
echo "dsl.atuc_vendor_id=\"${vid}\""
echo "dsl.atuc_system_vendor_id=\"${svid}\""
else
echo "ATU-C Vendor ID: ${vid}"
echo "ATU-C System Vendor ID: ${svid}"
fi
}
#
# XTSE capabilities
#
xtse() {
local xtusesg
local xtse1
local xtse2
local xtse3
local xtse4
local xtse5
local xtse6
local xtse7
local xtse8
local xtse_s=""
local annex_s=""
local line_mode_s=""
local vector_s=""
local dsmsg=""
local cmd=""
xtusesg=$(dsl_cmd g997xtusesg)
xtse1=$(dsl_val "$xtusesg" XTSE1)
xtse2=$(dsl_val "$xtusesg" XTSE2)
xtse3=$(dsl_val "$xtusesg" XTSE3)
xtse4=$(dsl_val "$xtusesg" XTSE4)
xtse5=$(dsl_val "$xtusesg" XTSE5)
xtse6=$(dsl_val "$xtusesg" XTSE6)
xtse7=$(dsl_val "$xtusesg" XTSE7)
xtse8=$(dsl_val "$xtusesg" XTSE8)
# Evaluate Annex (according to G.997.1, 7.3.1.1.1)
if [ $((xtse1 & 13)) != 0 \
-o $((xtse2 & 1)) != 0 \
-o $((xtse3 & 12)) != 0 \
-o $((xtse4 & 3)) != 0 \
-o $((xtse6 & 3)) != 0 \
-o $((xtse8 & 1)) != 0 ]; then
annex_s=" A,"
fi
if [ $((xtse1 & 48)) != 0 \
-o $((xtse2 & 2)) != 0 \
-o $((xtse3 & 48)) != 0 \
-o $((xtse6 & 12)) != 0 \
-o $((xtse8 & 2)) != 0 ]; then
annex_s="$annex_s B,"
fi
if [ $((xtse1 & 194)) != 0 \
-o $((xtse2 & 12)) != 0 \
-o $((xtse8 & 4)) != 0 ]; then
annex_s="$annex_s C,"
fi
if [ $((xtse4 & 48)) != 0 \
-o $((xtse5 & 3)) != 0 \
-o $((xtse6 & 192)) != 0 ]; then
annex_s="$annex_s I,"
fi
if [ $((xtse4 & 192)) != 0 \
-o $((xtse7 & 3)) != 0 ]; then
annex_s="$annex_s J,"
fi
if [ $((xtse5 & 60)) != 0 ]; then
annex_s="$annex_s L,"
fi
if [ $((xtse5 & 192)) != 0 \
-o $((xtse7 & 12)) != 0 ]; then
annex_s="$annex_s M,"
fi
annex_s=`echo ${annex_s:1}`
annex_s=`echo ${annex_s%?}`
# Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
# Regional standard: ANSI T1.413
if [ $((xtse1 & 1)) != 0 ]; then
line_mode_s=" T1.413,"
fi
# Regional standard: TS 101 388
if [ $((xtse1 & 1)) != 0 ]; then
line_mode_s="$line_mode_s TS 101 388,"
fi
if [ $((xtse1 & 252)) != 0 ]; then
line_mode_s="$line_mode_s G.992.1 (ADSL),"
fi
if [ $((xtse2 & 15)) != 0 ]; then
line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
fi
if [ $((xtse3 & 60)) != 0 \
-o $((xtse4 & 240)) != 0 \
-o $((xtse5 & 252)) != 0 ]; then
line_mode_s="$line_mode_s G.992.3 (ADSL2),"
fi
if [ $((xtse4 & 3)) != 0 \
-o $((xtse5 & 3)) != 0 ]; then
line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
fi
if [ $((xtse6 & 199)) != 0 \
-o $((xtse7 & 15)) != 0 ]; then
line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
fi
if [ $((xtse8 & 7)) != 0 ]; then
dsmsg=$(dsl_cmd dsmsg)
vector_s=$(dsl_val "$dsmsg" eVectorStatus)
case "$vector_s" in
"0") line_mode_s="$line_mode_s G.993.2 (VDSL2)," ;;
"1") line_mode_s="$line_mode_s G.993.5 (VDSL2 with downstream vectoring)," ;;
"2") line_mode_s="$line_mode_s G.993.5 (VDSL2 with down- and upstream vectoring)," ;;
*) line_mode_s="$line_mode_s unknown," ;;
esac
fi
#!!! PROPRIETARY & INTERMEDIATE USE !!!
if [ $((xtse8 & 128)) != 0 ]; then
line_mode_s="$line_mode_s G.993.1 (VDSL),"
fi
line_mode_s=`echo ${line_mode_s:1}`
line_mode_s=`echo ${line_mode_s%?}`
xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
if [ "$action" = "lucistat" ]; then
echo "dsl.xtse1=${xtse1:-nil}"
echo "dsl.xtse2=${xtse2:-nil}"
echo "dsl.xtse3=${xtse3:-nil}"
echo "dsl.xtse4=${xtse4:-nil}"
echo "dsl.xtse5=${xtse5:-nil}"
echo "dsl.xtse6=${xtse6:-nil}"
echo "dsl.xtse7=${xtse7:-nil}"
echo "dsl.xtse8=${xtse8:-nil}"
echo "dsl.xtse_s=\"$xtse_s\""
echo "dsl.annex_s=\"${annex_s}\""
echo "dsl.line_mode_s=\"${line_mode_s}\""
else
echo "XTSE Capabilities: ${xtse_s}"
echo "Annex: ${annex_s}"
echo "Line Mode: ${line_mode_s}"
fi
}
#
# Power Management Mode
#
power_mode() {
local pmsg=$(dsl_cmd g997pmsg)
local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
local s;
case "$pm" in
"-1") s="Power management state is not available" ;;
"0") s="L0 - Synchronized" ;;
"1") s="L1 - Power Down Data transmission (G.992.2)" ;;
"2") s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
"3") s="L3 - No power" ;;
*) s="unknown" ;;
esac
if [ "$action" = "lucistat" ]; then
echo "dsl.power_mode_num=${pm:-nil}"
echo "dsl.power_mode_s=\"$s\""
else
echo "Power Management Mode: $s"
fi
}
#
# Latency type (interleave delay)
#
latency_delay() {
local csg
local idu
local idu_s;
local sidu
local idd
local idd_s;
local sidd
csg=$(dsl_cmd g997csg 0 1)
idd=$(dsl_val "$csg" ActualInterleaveDelay)
csg=$(dsl_cmd g997csg 0 0)
idu=$(dsl_val "$csg" ActualInterleaveDelay)
[ -z "$idd" ] && idd=0
[ -z "$idu" ] && idu=0
if [ "$idd" -gt 100 ]; then
idd_s="Interleave"
else
idd_s="Fast"
fi
if [ "$idu" -gt 100 ]; then
idu_s="Interleave"
else
idu_s="Fast"
fi
sidu=$(scale_latency $idu)
sidd=$(scale_latency $idd)
if [ "$action" = "lucistat" ]; then
echo "dsl.latency_num_down=\"$sidd\""
echo "dsl.latency_num_up=\"$sidu\""
echo "dsl.latency_s_down=\"$idd_s\""
echo "dsl.latency_s_up=\"$idu_s\""
else
echo "Latency / Interleave Delay: Down: ${idd_s} (${sidd}) / Up: ${idu_s} (${sidu})"
fi
}
#
# Errors
#
errors() {
local lsctg
local dpctg
local ccsg
local esf
local esn
local sesf
local sesn
local lossf
local lossn
local uasf
local uasn
local crc_pf
local crc_pn
local crcp_pf
local crcp_pn
local hecf
local hecn
local fecn
local fecf
lsctg=$(dsl_cmd pmlsctg 1)
esf=$(dsl_val "$lsctg" nES)
sesf=$(dsl_val "$lsctg" nSES)
lossf=$(dsl_val "$lsctg" nLOSS)
uasf=$(dsl_val "$lsctg" nUAS)
lsctg=$(dsl_cmd pmlsctg 0)
esn=$(dsl_val "$lsctg" nES)
sesn=$(dsl_val "$lsctg" nSES)
lossn=$(dsl_val "$lsctg" nLOSS)
uasn=$(dsl_val "$lsctg" nUAS)
dpctg=$(dsl_cmd pmdpctg 0 1)
hecf=$(dsl_val "$dpctg" nHEC)
crc_pf=$(dsl_val "$dpctg" nCRC_P)
crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
dpctg=$(dsl_cmd pmdpctg 0 0)
hecn=$(dsl_val "$dpctg" nHEC)
crc_pn=$(dsl_val "$dpctg" nCRC_P)
crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
ccsg=$(dsl_cmd pmccsg 0 1 0)
fecf=$(dsl_val "$ccsg" nFEC)
ccsg=$(dsl_cmd pmccsg 0 0 0)
fecn=$(dsl_val "$ccsg" nFEC)
if [ "$action" = "lucistat" ]; then
echo "dsl.errors_fec_near=${fecn:-nil}"
echo "dsl.errors_fec_far=${fecf:-nil}"
echo "dsl.errors_es_near=${esn:-nil}"
echo "dsl.errors_es_far=${esf:-nil}"
echo "dsl.errors_ses_near=${sesn:-nil}"
echo "dsl.errors_ses_far=${sesf:-nil}"
echo "dsl.errors_loss_near=${lossn:-nil}"
echo "dsl.errors_loss_far=${lossf:-nil}"
echo "dsl.errors_uas_near=${uasn:-nil}"
echo "dsl.errors_uas_far=${uasf:-nil}"
echo "dsl.errors_hec_near=${hecn:-nil}"
echo "dsl.errors_hec_far=${hecf:-nil}"
echo "dsl.errors_crc_p_near=${crc_pn:-nil}"
echo "dsl.errors_crc_p_far=${crc_pf:-nil}"
echo "dsl.errors_crcp_p_near=${crcp_pn:-nil}"
echo "dsl.errors_crcp_p_far=${crcp_pf:-nil}"
else
echo "Forward Error Correction Seconds (FECS): Near: ${fecn} / Far: ${fecf}"
echo "Errored seconds (ES): Near: ${esn} / Far: ${esf}"
echo "Severely Errored Seconds (SES): Near: ${sesn} / Far: ${sesf}"
echo "Loss of Signal Seconds (LOSS): Near: ${lossn} / Far: ${lossf}"
echo "Unavailable Seconds (UAS): Near: ${uasn} / Far: ${uasf}"
echo "Header Error Code Errors (HEC): Near: ${hecn} / Far: ${hecf}"
echo "Non Pre-emtive CRC errors (CRC_P): Near: ${crc_pn} / Far: ${crc_pf}"
echo "Pre-emtive CRC errors (CRCP_P): Near: ${crcp_pn} / Far: ${crcp_pf}"
fi
}
#
# Work out how long the line has been up
#
line_uptime() {
local ccsg
local et
local etr
local d
local h
local m
local s
local rc=""
ccsg=$(dsl_cmd pmccsg 0 0 0)
et=$(dsl_val "$ccsg" nElapsedTime)
[ -z "$et" ] && et=0
d=$(expr $et / 86400)
etr=$(expr $et % 86400)
h=$(expr $etr / 3600)
etr=$(expr $etr % 3600)
m=$(expr $etr / 60)
s=$(expr $etr % 60)
[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
[ -z "$rc" ] && rc="down"
if [ "$action" = "lucistat" ]; then
echo "dsl.line_uptime=${et}"
echo "dsl.line_uptime_s=\"${rc}\""
else
echo "Line Uptime Seconds: ${et}"
echo "Line Uptime: ${rc}"
fi
}
#
# Get noise and attenuation figures
#
line_data() {
local lsg
local latnu
local latnd
local satnu
local satnd
local snru
local snrd
local attndru
local attndrd
local sattndru
local sattndrd
local actatpu
local actatpd
lsg=$(dsl_cmd g997lsg 1 1)
latnd=$(dsl_val "$lsg" LATN)
satnd=$(dsl_val "$lsg" SATN)
snrd=$(dsl_val "$lsg" SNR)
attndrd=$(dsl_val "$lsg" ATTNDR)
actatpd=$(dsl_val "$lsg" ACTATP)
lsg=$(dsl_cmd g997lsg 0 1)
latnu=$(dsl_val "$lsg" LATN)
satnu=$(dsl_val "$lsg" SATN)
snru=$(dsl_val "$lsg" SNR)
attndru=$(dsl_val "$lsg" ATTNDR)
actatpu=$(dsl_val "$lsg" ACTATP)
[ -z "$latnd" ] && latnd=0
[ -z "$latnu" ] && latnu=0
[ -z "$satnd" ] && satnd=0
[ -z "$satnu" ] && satnu=0
[ -z "$snrd" ] && snrd=0
[ -z "$snru" ] && snru=0
[ -z "$actatpd" ] && actatpd=0
[ -z "$actatpu" ] && actatpu=0
latnd=$(dbt $latnd)
latnu=$(dbt $latnu)
satnd=$(dbt $satnd)
satnu=$(dbt $satnu)
snrd=$(dbt $snrd)
snru=$(dbt $snru)
actatpd=$(dbt $actatpd)
actatpu=$(dbt $actatpu)
[ -z "$attndrd" ] && attndrd=0
[ -z "$attndru" ] && attndru=0
sattndrd=$(scale $attndrd)
sattndru=$(scale $attndru)
if [ "$action" = "lucistat" ]; then
echo "dsl.line_attenuation_down=$latnd"
echo "dsl.line_attenuation_up=$latnu"
echo "dsl.noise_margin_down=$snrd"
echo "dsl.noise_margin_up=$snru"
echo "dsl.signal_attenuation_down=$satnd"
echo "dsl.signal_attenuation_up=$satnu"
echo "dsl.actatp_down=$actatpd"
echo "dsl.actatp_up=$actatpu"
echo "dsl.max_data_rate_down=$attndrd"
echo "dsl.max_data_rate_up=$attndru"
echo "dsl.max_data_rate_down_s=\"$sattndrd\""
echo "dsl.max_data_rate_up_s=\"$sattndru\""
else
echo "Line Attenuation (LATN): Down: ${latnd}dB / Up: ${latnu}dB"
echo "Signal Attenuation (SATN): Down: ${satnd}dB / Up: ${satnu}dB"
echo "Noise Margin (SNR): Down: ${snrd}dB / Up: ${snru}dB"
echo "Aggregate Transmit Power (ACTATP): Down: ${actatpd}dB / Up: ${actatpu}dB"
echo "Max. Attainable Data Rate (ATTNDR): Down: ${sattndrd}/s / Up: ${sattndru}/s"
fi
}
#
# Is the line up? Or what state is it in?
#
line_state() {
local lsg=$(dsl_cmd lsg)
local ls=$(dsl_val "$lsg" nLineState);
local s;
case "$ls" in
"0x0") s="not initialized" ;;
"0x1") s="exception" ;;
"0x10") s="not updated" ;;
"0xff") s="idle request" ;;
"0x100") s="idle" ;;
"0x1ff") s="silent request" ;;
"0x200") s="silent" ;;
"0x300") s="handshake" ;;
"0x380") s="full_init" ;;
"0x400") s="discovery" ;;
"0x500") s="training" ;;
"0x600") s="analysis" ;;
"0x700") s="exchange" ;;
"0x800") s="showtime_no_sync" ;;
"0x801") s="showtime_tc_sync" ;;
"0x900") s="fastretrain" ;;
"0xa00") s="lowpower_l2" ;;
"0xb00") s="loopdiagnostic active" ;;
"0xb10") s="loopdiagnostic data exchange" ;;
"0xb20") s="loopdiagnostic data request" ;;
"0xc00") s="loopdiagnostic complete" ;;
"0x1000000") s="test" ;;
"0xd00") s="resync" ;;
"0x3c0") s="short init entry" ;;
"") s="not running daemon"; ls="0xfff" ;;
*) s="unknown" ;;
esac
if [ "$action" = "lucistat" ]; then
echo "dsl.line_state_num=$ls"
echo "dsl.line_state_detail=\"$s\""
if [ "$ls" = "0x801" ]; then
echo "dsl.line_state=\"UP\""
else
echo "dsl.line_state=\"DOWN\""
fi
else
if [ "$ls" = "0x801" ]; then
echo "Line State: UP [$ls: $s]"
else
echo "Line State: DOWN [$ls: $s]"
fi
fi
}
#
# Which profile is used?
#
profile() {
local bpstg=$(dsl_cmd bpstg)
local profile=$(dsl_val "$bpstg" nProfile);
local s;
case "$profile" in
"0") s="8a" ;;
"1") s="8b" ;;
"2") s="8c" ;;
"3") s="8d" ;;
"4") s="12a" ;;
"5") s="12b" ;;
"6") s="17a" ;;
"7") s="30a" ;;
"8") s="17b" ;;
"") s="";;
*) s="unknown" ;;
esac
if [ "$action" = "lucistat" ]; then
echo "dsl.profile=${profile:-nil}"
echo "dsl.profile_s=\"${s}\""
else
echo "Profile: $s"
fi
}
status() {
vendor
chipset
xtse
profile
line_state
errors
power_mode
latency_delay
data_rates
line_data
line_uptime
}
lucistat() {
echo "local dsl={}"
status
echo "return dsl"
}
Reference in a new issue View git blame Copy permalink