openwrtv3/target/linux/ar71xx
Piotr Dymacz 8c64824576 ar71xx: add support for GainStrong Oolite V5.2
GainStrong Oolite V5.2 is a small (39.5 x 78 mm), dual-band system on
module, based on Qualcomm QCA9531 + QCA9887. All QCA9531 SOC GPIOs are
available on castellated pins.

Specification:

- 650/400/200 MHz (CPU/DDR/AHB)
- 64/128 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 5x 10/100 Mbps Ethernet (all ports available on castellated pins)
- 2T2R 2.4 GHz (QCA9531), with ext. PA and LNA
- 1T1R 5 GHz (QCA9887) with ext. FEM (SKY85710-11)
- 3x U.FL
- 1x USB 2.0

The dedicated development board includes 5 FE ports, USB 2.0 port, two
buttons (one directly connected to SOC reset input), header with all
GPIOs and several LEDs.

Flash instruction:

Vendor firmware is based on OpenWrt. LuCI or sysupgrade can be used to
flash OpenWrt firmware.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-22 18:53:22 +01:00
..
base-files ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
files ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
generic ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
image ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
mikrotik ar71xx: reorganize kernel configuration 2018-01-13 19:54:45 +01:00
nand ar71xx: reorganize kernel configuration 2018-01-13 19:54:45 +01:00
patches-4.4 ar71xx: disable 40Mhz refclk for QCA953x 2018-02-22 18:53:22 +01:00
patches-4.9 ar71xx: disable 40Mhz refclk for QCA953x 2018-02-22 18:53:22 +01:00
tiny ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
config-4.4 ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
config-4.9 ar71xx: add support for GainStrong Oolite V5.2 2018-02-22 18:53:22 +01:00
Makefile ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
modules.mk ar71xx: add LED driver NU801 2015-12-11 15:04:57 +00:00