openwrtv3/package/base-files/files/lib/functions/uci-defaults.sh
John Crispin d0d3ca2a1b base-files: added option to configure the gpio led trigger in uci-defaults
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46341
2015-07-14 07:35:59 +00:00

329 lines
6.1 KiB
Bash

#!/bin/sh
# Copyright (C) 2011 OpenWrt.org
UCIDEF_LEDS_CHANGED=0
UCIDEF_GPIO_SWITCHES_CHANGED=0
ucidef_set_led_netdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='netdev'
set system.$cfg.dev='$dev'
set system.$cfg.mode='link tx rx'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_usbdev() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local dev=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='usbdev'
set system.$cfg.dev='$dev'
set system.$cfg.interval='50'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_wlan() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_switch() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
local port_mask=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
set system.$cfg.port_mask='$port_mask'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_default() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local default=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.default='$default'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_rssi() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local iface=$4
local minq=$5
local maxq=$6
local offset=$7
local factor=$8
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='rssi'
set system.$cfg.iface='rssid_$iface'
set system.$cfg.minq='$minq'
set system.$cfg.maxq='$maxq'
set system.$cfg.offset='$offset'
set system.$cfg.factor='$factor'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_timer() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local delayon=$4
local delayoff=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='timer'
set system.$cfg.delayon='$delayon'
set system.$cfg.delayoff='$delayoff'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_mmc() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local trigger=$4
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='$trigger'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_led_trigger_gpio() {
local cfg="led_$1"
local name=$2
local sysfs=$3
local gpio=$4
local inverted=$5
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='led'
set system.$cfg.name='$name'
set system.$cfg.sysfs='$sysfs'
set system.$cfg.trigger='gpio'
set system.$cfg.gpio='$gpio'
set system.$cfg.inverted='$inverted'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_set_rssimon() {
local dev="$1"
local refresh="$2"
local threshold="$3"
local cfg="rssid_$dev"
uci -q get system.$cfg && return 0
uci batch <<EOF
set system.$cfg='rssid'
set system.$cfg.dev='$dev'
set system.$cfg.refresh='$refresh'
set system.$cfg.threshold='$threshold'
EOF
UCIDEF_LEDS_CHANGED=1
}
ucidef_commit_leds()
{
[ "$UCIDEF_LEDS_CHANGED" = "1" ] && uci commit system
}
ucidef_set_gpio_switch() {
local cfg="gpio_switch_$1"
local name="$2"
local gpio_pin="$3"
# use "0" as default value
local default="${4:-0}"
uci -q get "system.$cfg" && return 0
uci batch <<EOF
set system.$cfg='gpio_switch'
set system.$cfg.name='$name'
set system.$cfg.gpio_pin='$gpio_pin'
set system.$cfg.value='$default'
EOF
UCIDEF_GPIO_SWITCHES_CHANGED=1
}
ucidef_commit_gpio_switches()
{
[ "$UCIDEF_GPIO_SWITCHES_CHANGED" = "1" ] && uci commit system
}
ucidef_set_interface_loopback() {
uci batch <<EOF
set network.loopback='interface'
set network.loopback.ifname='lo'
set network.loopback.proto='static'
set network.loopback.ipaddr='127.0.0.1'
set network.loopback.netmask='255.0.0.0'
set network.globals='globals'
set network.globals.ula_prefix='auto'
EOF
}
ucidef_set_interface_raw() {
local cfg=$1
local ifname=$2
local proto=${3:-"none"}
uci batch <<EOF
set network.$cfg='interface'
set network.$cfg.ifname='$ifname'
set network.$cfg.proto='$proto'
EOF
}
ucidef_set_interface_lan() {
local ifname=$1
uci batch <<EOF
set network.lan='interface'
set network.lan.ifname='$ifname'
set network.lan.force_link=1
set network.lan.type='bridge'
set network.lan.proto='static'
set network.lan.ipaddr='192.168.1.1'
set network.lan.netmask='255.255.255.0'
set network.lan.ip6assign='60'
EOF
}
ucidef_set_interface_wan() {
local ifname=$1
uci batch <<EOF
set network.wan='interface'
set network.wan.ifname='$ifname'
set network.wan.proto='dhcp'
set network.wan6='interface'
set network.wan6.ifname='$ifname'
set network.wan6.proto='dhcpv6'
EOF
}
ucidef_set_interfaces_lan_wan() {
local lan_ifname=$1
local wan_ifname=$2
ucidef_set_interface_lan "$lan_ifname"
ucidef_set_interface_wan "$wan_ifname"
}
ucidef_set_interface_macaddr() {
local ifname=$1
local mac=$2
uci batch <<EOF
set network.$ifname.macaddr='$mac'
EOF
}
ucidef_add_switch() {
local name=$1
local reset=$2
local enable=$3
uci batch <<EOF
add network switch
set network.@switch[-1].name='$name'
set network.@switch[-1].reset='$reset'
set network.@switch[-1].enable_vlan='$enable'
EOF
}
ucidef_add_switch_vlan() {
local device=$1
local vlan=$2
local ports=$3
uci batch <<EOF
add network switch_vlan
set network.@switch_vlan[-1].device='$device'
set network.@switch_vlan[-1].vlan='$vlan'
set network.@switch_vlan[-1].ports='$ports'
EOF
}
ucidef_add_switch_port() {
local device=$1
local port=$2
uci batch <<EOF
add network switch_port
set network.@switch_port[-1].device='$device'
set network.@switch_port[-1].port='$port'
EOF
}