openwrtv3/target/linux/ramips
Pawel Dembicki a5bd8de0bd ramips: add support for D-Link DWR-116-A1/2
The DWR-116-A1/2 Wireless Router is based on the MT7620N SoC.

Specification:

  MediaTek MT7620N (580 Mhz)
  32 MB of RAM
  8 MB of FLASH
  802.11bgn radio
  5x 10/100 Mbps Ethernet (1 WAN and 4 LAN)
  2x external, non-detachable antennas
  UART (J1 in A1, JP1 in A2) header on PCB (57600 8n1)
  6x LED (GPIO-controlled), 2x button
  JBOOT bootloader

Known issues:
WAN LED is drived by uartl tx pin. I decide to use this pin as
uartlite tx pin.

Installation:
Apply factory image via http web-gui.

Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
2018-03-18 22:22:38 +01:00
..
base-files ramips: add support for D-Link DWR-116-A1/2 2018-03-18 22:22:38 +01:00
dts ramips: add support for D-Link DWR-116-A1/2 2018-03-18 22:22:38 +01:00
files-4.9/drivers/net/ethernet/mtk ramips: mt7620: power up ephy port 4 2018-03-06 19:49:05 +01:00
files-4.14/drivers/net/ethernet/mtk ramips: mt7620: power up ephy port 4 2018-03-06 19:49:05 +01:00
image ramips: add support for D-Link DWR-116-A1/2 2018-03-18 22:22:38 +01:00
mt76x8 kernel: optimize for performance by default starting with 4.14 2018-02-24 16:05:28 +01:00
mt7620 ramips: add support for D-Link DWR-116-A1/2 2018-03-18 22:22:38 +01:00
mt7621 ramips: preliminary support for 4.14 2018-02-15 10:46:39 +01:00
patches-4.9 Revert "ramips: gpio: fix compilation if CONFIG_GPIO_SYSFS=n" 2018-03-13 13:10:21 +01:00
patches-4.14 kernel: bump 4.14 to 4.14.23 2018-03-02 21:33:08 +01:00
rt288x kernel: optimize for performance by default starting with 4.14 2018-02-24 16:05:28 +01:00
rt305x kernel: optimize for performance by default starting with 4.14 2018-02-24 16:05:28 +01:00
rt3883 kernel: optimize for performance by default starting with 4.14 2018-02-24 16:05:28 +01:00
Makefile ramips: merge mt7628/mt7688 into mt76x8 2017-08-30 17:05:10 +02:00
modules.mk ramips: fix mt76x8 dependencies 2017-09-05 08:08:36 +02:00