openwrtv3/target/linux/lantiq/patches-4.4/0025-NET-MIPS-lantiq-adds-xrx200-net.patch
Mathias Kresin 715b066419 lantiq: fix broadcasts and vlans in two iface mode
The two phy operation mode where one phy is assigned to an interface
without lantiq,* device tree property and the other phy is assigned to
an interface with the lantiq,wan device property was broken with the
multicast package leaks between vlans fixes.

Move the multicast packages relevant portmap settings to the condition
which handles multicast packages for better readability.

Replace the priv->port_map based port_map only for the interface which
has the lantiq,switch device tree property set, to allow tagged
multicast packages in two phy mode where the lantiq,switch device tree
property isn't used.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-03-11 13:45:00 +01:00

3395 lines
157 KiB
Diff

From fb0c9601f4414c39ff68e26b88681bef0bb04954 Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Mon, 22 Oct 2012 12:22:23 +0200
Subject: [PATCH 25/36] NET: MIPS: lantiq: adds xrx200-net
---
drivers/net/ethernet/Kconfig | 8 +-
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/lantiq_pce.h | 163 +++
drivers/net/ethernet/lantiq_xrx200.c | 1798 +++++++++++++++++++++++++++++++
drivers/net/ethernet/lantiq_xrx200_sw.h | 1328 +++++++++++++++++++++++
5 files changed, 3297 insertions(+), 1 deletion(-)
create mode 100644 drivers/net/ethernet/lantiq_pce.h
create mode 100644 drivers/net/ethernet/lantiq_xrx200.c
create mode 100644 drivers/net/ethernet/lantiq_xrx200_sw.h
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -103,7 +103,13 @@ config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
---help---
- Support for the MII0 inside the Lantiq SoC
+ Support for the MII0 inside the Lantiq ADSL SoC
+
+config LANTIQ_XRX200
+ tristate "Lantiq SoC XRX200 driver"
+ depends on SOC_TYPE_XWAY
+ ---help---
+ Support for the MII0 inside the Lantiq VDSL SoC
source "drivers/net/ethernet/marvell/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_NET_VENDOR_XSCALE) += xscal
obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
+obj-$(CONFIG_LANTIQ_XRX200) += lantiq_xrx200.o
obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_pce.h
@@ -0,0 +1,163 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ *
+ * PCE microcode extracted from UGW5.2 switch api
+ */
+
+/* Switch API Micro Code V0.3 */
+enum {
+ OUT_MAC0 = 0,
+ OUT_MAC1,
+ OUT_MAC2,
+ OUT_MAC3,
+ OUT_MAC4,
+ OUT_MAC5,
+ OUT_ETHTYP,
+ OUT_VTAG0,
+ OUT_VTAG1,
+ OUT_ITAG0,
+ OUT_ITAG1, /*10 */
+ OUT_ITAG2,
+ OUT_ITAG3,
+ OUT_IP0,
+ OUT_IP1,
+ OUT_IP2,
+ OUT_IP3,
+ OUT_SIP0,
+ OUT_SIP1,
+ OUT_SIP2,
+ OUT_SIP3, /*20*/
+ OUT_SIP4,
+ OUT_SIP5,
+ OUT_SIP6,
+ OUT_SIP7,
+ OUT_DIP0,
+ OUT_DIP1,
+ OUT_DIP2,
+ OUT_DIP3,
+ OUT_DIP4,
+ OUT_DIP5, /*30*/
+ OUT_DIP6,
+ OUT_DIP7,
+ OUT_SESID,
+ OUT_PROT,
+ OUT_APP0,
+ OUT_APP1,
+ OUT_IGMP0,
+ OUT_IGMP1,
+ OUT_IPOFF, /*39*/
+ OUT_NONE = 63
+};
+
+/* parser's microcode length type */
+#define INSTR 0
+#define IPV6 1
+#define LENACCU 2
+
+/* parser's microcode flag type */
+enum {
+ FLAG_ITAG = 0,
+ FLAG_VLAN,
+ FLAG_SNAP,
+ FLAG_PPPOE,
+ FLAG_IPV6,
+ FLAG_IPV6FL,
+ FLAG_IPV4,
+ FLAG_IGMP,
+ FLAG_TU,
+ FLAG_HOP,
+ FLAG_NN1, /*10 */
+ FLAG_NN2,
+ FLAG_END,
+ FLAG_NO, /*13*/
+};
+
+/* Micro code version V2_11 (extension for parsing IPv6 in PPPoE) */
+#define MC_ENTRY(val, msk, ns, out, len, type, flags, ipv4_len) \
+ { {val, msk, (ns<<10 | out<<4 | len>>1), (len&1)<<15 | type<<13 | flags<<9 | ipv4_len<<8 }}
+struct pce_microcode {
+ unsigned short val[4];
+/* unsigned short val_2;
+ unsigned short val_1;
+ unsigned short val_0;*/
+} pce_microcode[] = {
+ /* value mask ns fields L type flags ipv4_len */
+ MC_ENTRY(0x88c3, 0xFFFF, 1, OUT_ITAG0, 4, INSTR, FLAG_ITAG, 0),
+ MC_ENTRY(0x8100, 0xFFFF, 2, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x88A8, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x8100, 0xFFFF, 1, OUT_VTAG0, 2, INSTR, FLAG_VLAN, 0),
+ MC_ENTRY(0x8864, 0xFFFF, 17, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0800, 0xFFFF, 21, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x86DD, 0xFFFF, 22, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x8863, 0xFFFF, 16, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xF800, 10, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0600, 0x0600, 38, OUT_ETHTYP, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 12, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0xAAAA, 0xFFFF, 14, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0300, 0xFF00, 39, OUT_NONE, 0, INSTR, FLAG_SNAP, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_DIP7, 3, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 18, OUT_DIP7, 3, INSTR, FLAG_PPPOE, 0),
+ MC_ENTRY(0x0021, 0xFFFF, 21, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0057, 0xFFFF, 22, OUT_NONE, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x4000, 0xF000, 24, OUT_IP0, 4, INSTR, FLAG_IPV4, 1),
+ MC_ENTRY(0x6000, 0xF000, 27, OUT_IP0, 3, INSTR, FLAG_IPV6, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 25, OUT_IP3, 2, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 26, OUT_SIP0, 4, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_NONE, 0, LENACCU, FLAG_NO, 0),
+ MC_ENTRY(0x1100, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0600, 0xFF00, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_HOP, 0),
+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN1, 0),
+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_IP3, 17, INSTR, FLAG_NN2, 0),
+ MC_ENTRY(0x0000, 0x0000, 37, OUT_PROT, 1, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_HOP, 0),
+ MC_ENTRY(0x2B00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN1, 0),
+ MC_ENTRY(0x3C00, 0xFF00, 33, OUT_NONE, 0, IPV6, FLAG_NN2, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_PROT, 1, IPV6, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 38, OUT_SIP0, 16, INSTR, FLAG_NO, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_APP0, 4, INSTR, FLAG_IGMP, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+ MC_ENTRY(0x0000, 0x0000, 39, OUT_NONE, 0, INSTR, FLAG_END, 0),
+};
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_xrx200.c
@@ -0,0 +1,1852 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Lantiq Deutschland
+ * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/switch.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/if_vlan.h>
+#include <asm/delay.h>
+
+#include <linux/of_net.h>
+#include <linux/of_mdio.h>
+#include <linux/of_gpio.h>
+
+#include <xway_dma.h>
+#include <lantiq_soc.h>
+
+#include "lantiq_pce.h"
+#include "lantiq_xrx200_sw.h"
+
+#define SW_POLLING
+#define SW_ROUTING
+
+#ifdef SW_ROUTING
+#define XRX200_MAX_DEV 2
+#else
+#define XRX200_MAX_DEV 1
+#endif
+
+#define XRX200_MAX_VLAN 64
+#define XRX200_PCE_ACTVLAN_IDX 0x01
+#define XRX200_PCE_VLANMAP_IDX 0x02
+
+#define XRX200_MAX_PORT 7
+#define XRX200_MAX_DMA 8
+
+#define XRX200_HEADROOM 4
+
+#define XRX200_TX_TIMEOUT (10 * HZ)
+
+/* port type */
+#define XRX200_PORT_TYPE_PHY 1
+#define XRX200_PORT_TYPE_MAC 2
+
+/* DMA */
+#define XRX200_DMA_DATA_LEN 0x600
+#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
+#define XRX200_DMA_RX 0
+#define XRX200_DMA_TX 1
+#define XRX200_DMA_TX_2 3
+#define XRX200_DMA_IS_TX(x) (x%2)
+#define XRX200_DMA_IS_RX(x) (!XRX200_DMA_IS_TX(x))
+
+/* fetch / store dma */
+#define FDMA_PCTRL0 0x2A00
+#define FDMA_PCTRLx(x) (FDMA_PCTRL0 + (x * 0x18))
+#define SDMA_PCTRL0 0x2F00
+#define SDMA_PCTRLx(x) (SDMA_PCTRL0 + (x * 0x18))
+
+/* buffer management */
+#define BM_PCFG0 0x200
+#define BM_PCFGx(x) (BM_PCFG0 + (x * 8))
+
+/* MDIO */
+#define MDIO_GLOB 0x0000
+#define MDIO_CTRL 0x0020
+#define MDIO_READ 0x0024
+#define MDIO_WRITE 0x0028
+#define MDIO_PHY0 0x0054
+#define MDIO_PHY(x) (0x0054 - (x * sizeof(unsigned)))
+#define MDIO_CLK_CFG0 0x002C
+#define MDIO_CLK_CFG1 0x0030
+
+#define MDIO_GLOB_ENABLE 0x8000
+#define MDIO_BUSY BIT(12)
+#define MDIO_RD BIT(11)
+#define MDIO_WR BIT(10)
+#define MDIO_MASK 0x1f
+#define MDIO_ADDRSHIFT 5
+#define MDIO1_25MHZ 9
+
+#define MDIO_PHY_LINK_DOWN 0x4000
+#define MDIO_PHY_LINK_UP 0x2000
+
+#define MDIO_PHY_SPEED_M10 0x0000
+#define MDIO_PHY_SPEED_M100 0x0800
+#define MDIO_PHY_SPEED_G1 0x1000
+
+#define MDIO_PHY_FDUP_EN 0x0200
+#define MDIO_PHY_FDUP_DIS 0x0600
+
+#define MDIO_PHY_LINK_MASK 0x6000
+#define MDIO_PHY_SPEED_MASK 0x1800
+#define MDIO_PHY_FDUP_MASK 0x0600
+#define MDIO_PHY_ADDR_MASK 0x001f
+#define MDIO_UPDATE_MASK MDIO_PHY_ADDR_MASK | MDIO_PHY_LINK_MASK | \
+ MDIO_PHY_SPEED_MASK | MDIO_PHY_FDUP_MASK
+
+/* MII */
+#define MII_CFG(p) (p * 8)
+
+#define MII_CFG_EN BIT(14)
+
+#define MII_CFG_MODE_MIIP 0x0
+#define MII_CFG_MODE_MIIM 0x1
+#define MII_CFG_MODE_RMIIP 0x2
+#define MII_CFG_MODE_RMIIM 0x3
+#define MII_CFG_MODE_RGMII 0x4
+#define MII_CFG_MODE_MASK 0xf
+
+#define MII_CFG_RATE_M2P5 0x00
+#define MII_CFG_RATE_M25 0x10
+#define MII_CFG_RATE_M125 0x20
+#define MII_CFG_RATE_M50 0x30
+#define MII_CFG_RATE_AUTO 0x40
+#define MII_CFG_RATE_MASK 0x70
+
+/* cpu port mac */
+#define PMAC_HD_CTL 0x0000
+#define PMAC_RX_IPG 0x0024
+#define PMAC_EWAN 0x002c
+
+#define PMAC_IPG_MASK 0xf
+#define PMAC_HD_CTL_AS 0x0008
+#define PMAC_HD_CTL_AC 0x0004
+#define PMAC_HD_CTL_RC 0x0010
+#define PMAC_HD_CTL_RXSH 0x0040
+#define PMAC_HD_CTL_AST 0x0080
+#define PMAC_HD_CTL_RST 0x0100
+
+/* PCE */
+#define PCE_TBL_KEY(x) (0x1100 + ((7 - x) * 4))
+#define PCE_TBL_MASK 0x1120
+#define PCE_TBL_VAL(x) (0x1124 + ((4 - x) * 4))
+#define PCE_TBL_ADDR 0x1138
+#define PCE_TBL_CTRL 0x113c
+#define PCE_PMAP1 0x114c
+#define PCE_PMAP2 0x1150
+#define PCE_PMAP3 0x1154
+#define PCE_GCTRL_REG(x) (0x1158 + (x * 4))
+#define PCE_PCTRL_REG(p, x) (0x1200 + (((p * 0xa) + x) * 4))
+
+#define PCE_TBL_BUSY BIT(15)
+#define PCE_TBL_CFG_ADDR_MASK 0x1f
+#define PCE_TBL_CFG_ADWR 0x20
+#define PCE_TBL_CFG_ADWR_MASK 0x60
+#define PCE_INGRESS BIT(11)
+
+/* MAC */
+#define MAC_FLEN_REG (0x2314)
+#define MAC_CTRL_REG(p, x) (0x240c + (((p * 0xc) + x) * 4))
+
+/* buffer management */
+#define BM_PCFG(p) (0x200 + (p * 8))
+
+/* special tag in TX path header */
+#define SPID_SHIFT 24
+#define DPID_SHIFT 16
+#define DPID_ENABLE 1
+#define SPID_CPU_PORT 2
+#define PORT_MAP_SEL BIT(15)
+#define PORT_MAP_EN BIT(14)
+#define PORT_MAP_SHIFT 1
+#define PORT_MAP_MASK 0x3f
+
+#define SPPID_MASK 0x7
+#define SPPID_SHIFT 4
+
+/* MII regs not yet in linux */
+#define MDIO_DEVAD_NONE (-1)
+#define ADVERTIZE_MPD (1 << 10)
+
+struct xrx200_port {
+ u8 num;
+ u8 phy_addr;
+ u16 flags;
+ phy_interface_t phy_if;
+
+ int link;
+ int gpio;
+ enum of_gpio_flags gpio_flags;
+
+ struct phy_device *phydev;
+ struct device_node *phy_node;
+};
+
+struct xrx200_chan {
+ int idx;
+ int refcount;
+ int tx_free;
+
+ struct net_device dummy_dev;
+ struct net_device *devs[XRX200_MAX_DEV];
+
+ struct tasklet_struct tasklet;
+ struct napi_struct napi;
+ struct ltq_dma_channel dma;
+ struct sk_buff *skb[LTQ_DESC_NUM];
+
+ spinlock_t lock;
+};
+
+struct xrx200_hw {
+ struct clk *clk;
+ struct mii_bus *mii_bus;
+
+ struct xrx200_chan chan[XRX200_MAX_DMA];
+ u16 vlan_vid[XRX200_MAX_VLAN];
+ u16 vlan_port_map[XRX200_MAX_VLAN];
+
+ struct net_device *devs[XRX200_MAX_DEV];
+ int num_devs;
+
+ int port_map[XRX200_MAX_PORT];
+ unsigned short wan_map;
+
+ struct switch_dev swdev;
+};
+
+struct xrx200_priv {
+ struct net_device_stats stats;
+ int id;
+
+ struct xrx200_port port[XRX200_MAX_PORT];
+ int num_port;
+ bool wan;
+ bool sw;
+ unsigned short port_map;
+ unsigned char mac[6];
+
+ struct xrx200_hw *hw;
+};
+
+static __iomem void *xrx200_switch_membase;
+static __iomem void *xrx200_mii_membase;
+static __iomem void *xrx200_mdio_membase;
+static __iomem void *xrx200_pmac_membase;
+
+#define ltq_switch_r32(x) ltq_r32(xrx200_switch_membase + (x))
+#define ltq_switch_w32(x, y) ltq_w32(x, xrx200_switch_membase + (y))
+#define ltq_switch_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_switch_membase + (z))
+
+#define ltq_mdio_r32(x) ltq_r32(xrx200_mdio_membase + (x))
+#define ltq_mdio_w32(x, y) ltq_w32(x, xrx200_mdio_membase + (y))
+#define ltq_mdio_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_mdio_membase + (z))
+
+#define ltq_mii_r32(x) ltq_r32(xrx200_mii_membase + (x))
+#define ltq_mii_w32(x, y) ltq_w32(x, xrx200_mii_membase + (y))
+#define ltq_mii_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_mii_membase + (z))
+
+#define ltq_pmac_r32(x) ltq_r32(xrx200_pmac_membase + (x))
+#define ltq_pmac_w32(x, y) ltq_w32(x, xrx200_pmac_membase + (y))
+#define ltq_pmac_w32_mask(x, y, z) \
+ ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
+
+#define XRX200_GLOBAL_REGATTR(reg) \
+ .id = reg, \
+ .type = SWITCH_TYPE_INT, \
+ .set = xrx200_set_global_attr, \
+ .get = xrx200_get_global_attr
+
+#define XRX200_PORT_REGATTR(reg) \
+ .id = reg, \
+ .type = SWITCH_TYPE_INT, \
+ .set = xrx200_set_port_attr, \
+ .get = xrx200_get_port_attr
+
+static int xrx200sw_read_x(int reg, int x)
+{
+ int value, mask, addr;
+
+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
+ value = ltq_switch_r32(addr);
+ mask = (1 << xrx200sw_reg[reg].size) - 1;
+ value = (value >> xrx200sw_reg[reg].shift);
+
+ return (value & mask);
+}
+
+static int xrx200sw_read(int reg)
+{
+ return xrx200sw_read_x(reg, 0);
+}
+
+static void xrx200sw_write_x(int value, int reg, int x)
+{
+ int mask, addr;
+
+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
+ mask = (1 << xrx200sw_reg[reg].size) - 1;
+ mask = (mask << xrx200sw_reg[reg].shift);
+ value = (value << xrx200sw_reg[reg].shift) & mask;
+
+ ltq_switch_w32_mask(mask, value, addr);
+}
+
+static void xrx200sw_write(int value, int reg)
+{
+ xrx200sw_write_x(value, reg, 0);
+}
+
+struct xrx200_pce_table_entry {
+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
+ int table; // PCE_TBL_CTRL.ADDR = pData->table
+ unsigned short key[8];
+ unsigned short val[5];
+ unsigned short mask;
+ unsigned short type;
+ unsigned short valid;
+ unsigned short gmap;
+};
+
+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
+{
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ // prepare the table access:
+ // PCE_TBL_ADDR.ADDR = pData->table_index
+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
+ // PCE_TBL_CTRL.ADDR = pData->table
+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
+
+ //(address-based read)
+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
+
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
+
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ // read the keys
+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
+
+ // read the values
+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
+
+ // read the mask
+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
+ // read the type
+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
+ // read the valid flag
+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
+ // read the group map
+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
+
+ return 0;
+}
+
+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
+{
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ // prepare the table access:
+ // PCE_TBL_ADDR.ADDR = pData->table_index
+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
+ // PCE_TBL_CTRL.ADDR = pData->table
+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
+
+ //(address-based write)
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
+
+ // read the keys
+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
+
+ // read the values
+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
+
+ // read the mask
+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
+ // read the type
+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
+ // read the valid flag
+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
+ // read the group map
+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
+
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
+
+ // wait until hardware is ready
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
+
+ return 0;
+}
+
+static void xrx200sw_fixup_pvids(void)
+{
+ int index, p, portmap, untagged;
+ struct xrx200_pce_table_entry tem;
+ struct xrx200_pce_table_entry tev;
+
+ portmap = 0;
+ for (p = 0; p < XRX200_MAX_PORT; p++)
+ portmap |= BIT(p);
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+
+ for (index = XRX200_MAX_VLAN; index-- > 0;)
+ {
+ tev.index = index;
+ xrx200_pce_table_entry_read(&tev);
+
+ if (tev.valid == 0)
+ continue;
+
+ tem.index = index;
+ xrx200_pce_table_entry_read(&tem);
+
+ if (tem.val[0] == 0)
+ continue;
+
+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
+
+ for (p = 0; p < XRX200_MAX_PORT; p++)
+ if (untagged & BIT(p))
+ {
+ portmap &= ~BIT(p);
+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
+ }
+
+ for (p = 0; p < XRX200_MAX_PORT; p++)
+ if (portmap & BIT(p))
+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
+ }
+}
+
+// swconfig interface
+static void xrx200_hw_init(struct xrx200_hw *hw);
+
+// global
+static int xrx200sw_reset_switch(struct switch_dev *dev)
+{
+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
+
+ xrx200_hw_init(hw);
+
+ return 0;
+}
+
+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ int p;
+
+ if ((attr->max > 0) && (val->value.i > attr->max))
+ return -EINVAL;
+
+ for (p = 0; p < XRX200_MAX_PORT; p++) {
+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
+ }
+
+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
+ return 0;
+}
+
+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ val->value.i = xrx200sw_read(attr->id);
+ return 0;
+}
+
+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ if ((attr->max > 0) && (val->value.i > attr->max))
+ return -EINVAL;
+
+ xrx200sw_write(val->value.i, attr->id);
+ return 0;
+}
+
+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ val->value.i = xrx200sw_read(attr->id);
+ return 0;
+}
+
+// vlan
+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
+ int i;
+ struct xrx200_pce_table_entry tev;
+ struct xrx200_pce_table_entry tem;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
+ {
+ tev.index = i;
+ xrx200_pce_table_entry_read(&tev);
+ if (tev.key[0] == val->value.i && i != val->port_vlan)
+ return -EINVAL;
+ }
+
+ hw->vlan_vid[val->port_vlan] = val->value.i;
+
+ tev.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tev);
+ tev.key[0] = val->value.i;
+ tev.valid = val->value.i > 0;
+ xrx200_pce_table_entry_write(&tev);
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+ tem.val[0] = val->value.i;
+ xrx200_pce_table_entry_write(&tem);
+
+ xrx200sw_fixup_pvids();
+ return 0;
+}
+
+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_pce_table_entry te;
+
+ te.table = XRX200_PCE_ACTVLAN_IDX;
+ te.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&te);
+ val->value.i = te.key[0];
+
+ return 0;
+}
+
+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
+ int i, portmap, tagmap, untagged;
+ struct xrx200_pce_table_entry tem;
+
+ portmap = 0;
+ tagmap = 0;
+ for (i = 0; i < val->len; i++)
+ {
+ struct switch_port *p = &val->value.ports[i];
+
+ portmap |= (1 << p->id);
+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
+ tagmap |= (1 << p->id);
+ }
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+
+ untagged = portmap ^ tagmap;
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
+ {
+ tem.index = i;
+ xrx200_pce_table_entry_read(&tem);
+
+ if (tem.val[0] == 0)
+ continue;
+
+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
+ return -EINVAL;
+ }
+
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+
+ // auto-enable this vlan if not enabled already
+ if (tem.val[0] == 0)
+ {
+ struct switch_val v;
+ v.port_vlan = val->port_vlan;
+ v.value.i = val->port_vlan;
+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
+ return -EINVAL;
+
+ //read updated tem
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+ }
+
+ tem.val[1] = portmap;
+ tem.val[2] = tagmap;
+ xrx200_pce_table_entry_write(&tem);
+
+ ltq_switch_w32_mask(0, portmap, PCE_PMAP2);
+ ltq_switch_w32_mask(0, portmap, PCE_PMAP3);
+ hw->vlan_port_map[val->port_vlan] = portmap;
+
+ xrx200sw_fixup_pvids();
+
+ return 0;
+}
+
+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
+{
+ int i;
+ unsigned short ports, tags;
+ struct xrx200_pce_table_entry tem;
+
+ tem.table = XRX200_PCE_VLANMAP_IDX;
+ tem.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tem);
+
+ ports = tem.val[1];
+ tags = tem.val[2];
+
+ for (i = 0; i < XRX200_MAX_PORT; i++) {
+ struct switch_port *p;
+
+ if (!(ports & (1 << i)))
+ continue;
+
+ p = &val->value.ports[val->len++];
+ p->id = i;
+ if (tags & (1 << i))
+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
+ else
+ p->flags = 0;
+ }
+
+ return 0;
+}
+
+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_pce_table_entry tev;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+ tev.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tev);
+
+ if (tev.key[0] == 0)
+ return -EINVAL;
+
+ tev.valid = val->value.i;
+ xrx200_pce_table_entry_write(&tev);
+
+ xrx200sw_fixup_pvids();
+ return 0;
+}
+
+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
+ struct switch_val *val)
+{
+ struct xrx200_pce_table_entry tev;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+ tev.index = val->port_vlan;
+ xrx200_pce_table_entry_read(&tev);
+ val->value.i = tev.valid;
+
+ return 0;
+}
+
+// port
+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
+{
+ struct xrx200_pce_table_entry tev;
+
+ if (port >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
+ xrx200_pce_table_entry_read(&tev);
+
+ *val = tev.key[0];
+ return 0;
+}
+
+static int xrx200sw_get_port_link(struct switch_dev *dev,
+ int port,
+ struct switch_port_link *link)
+{
+ if (port >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
+ if (!link->link)
+ return 0;
+
+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
+
+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
+
+ link->speed = SWITCH_PORT_SPEED_10;
+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
+ link->speed = SWITCH_PORT_SPEED_100;
+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
+ link->speed = SWITCH_PORT_SPEED_1000;
+
+ return 0;
+}
+
+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ if (val->port_vlan >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ if ((attr->max > 0) && (val->value.i > attr->max))
+ return -EINVAL;
+
+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
+ return 0;
+}
+
+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
+{
+ if (val->port_vlan >= XRX200_MAX_PORT)
+ return -EINVAL;
+
+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
+ return 0;
+}
+
+// attributes
+static struct switch_attr xrx200sw_globals[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .set = xrx200_set_vlan_mode_enable,
+ .get = xrx200_get_vlan_mode_enable,
+ .name = "enable_vlan",
+ .description = "Enable VLAN mode",
+ .max = 1},
+};
+
+static struct switch_attr xrx200sw_port[] = {
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
+ .name = "uvr",
+ .description = "Unknown VLAN Rule",
+ .max = 1,
+ },
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
+ .name = "vsr",
+ .description = "VLAN Security Rule",
+ .max = 1,
+ },
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
+ .name = "vinr",
+ .description = "VLAN Ingress Tag Rule",
+ .max = 2,
+ },
+ {
+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
+ .name = "tvm",
+ .description = "Transparent VLAN Mode",
+ .max = 1,
+ },
+};
+
+static struct switch_attr xrx200sw_vlan[] = {
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "vid",
+ .description = "VLAN ID (0-4094)",
+ .set = xrx200sw_set_vlan_vid,
+ .get = xrx200sw_get_vlan_vid,
+ .max = 4094,
+ },
+ {
+ .type = SWITCH_TYPE_INT,
+ .name = "enable",
+ .description = "Enable VLAN",
+ .set = xrx200sw_set_vlan_enable,
+ .get = xrx200sw_get_vlan_enable,
+ .max = 1,
+ },
+};
+
+static const struct switch_dev_ops xrx200sw_ops = {
+ .attr_global = {
+ .attr = xrx200sw_globals,
+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
+ },
+ .attr_port = {
+ .attr = xrx200sw_port,
+ .n_attr = ARRAY_SIZE(xrx200sw_port),
+ },
+ .attr_vlan = {
+ .attr = xrx200sw_vlan,
+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
+ },
+ .get_vlan_ports = xrx200sw_get_vlan_ports,
+ .set_vlan_ports = xrx200sw_set_vlan_ports,
+ .get_port_pvid = xrx200sw_get_port_pvid,
+ .reset_switch = xrx200sw_reset_switch,
+ .get_port_link = xrx200sw_get_port_link,
+// .get_port_stats = xrx200sw_get_port_stats, //TODO
+};
+
+static int xrx200sw_init(struct xrx200_hw *hw)
+{
+ int netdev_num;
+
+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
+ {
+ struct switch_dev *swdev;
+ struct net_device *dev = hw->devs[netdev_num];
+ struct xrx200_priv *priv = netdev_priv(dev);
+ if (!priv->sw)
+ continue;
+
+ swdev = &hw->swdev;
+
+ swdev->name = "Lantiq XRX200 Switch";
+ swdev->vlans = XRX200_MAX_VLAN;
+ swdev->ports = XRX200_MAX_PORT;
+ swdev->cpu_port = 6;
+ swdev->ops = &xrx200sw_ops;
+
+ register_switch(swdev, dev);
+ return 0; // enough switches
+ }
+ return 0;
+}
+
+static int xrx200_open(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ int i;
+
+ for (i = 0; i < XRX200_MAX_DMA; i++) {
+ if (!priv->hw->chan[i].dma.irq)
+ continue;
+ spin_lock_bh(&priv->hw->chan[i].lock);
+ if (!priv->hw->chan[i].refcount) {
+ if (XRX200_DMA_IS_RX(i))
+ napi_enable(&priv->hw->chan[i].napi);
+ ltq_dma_open(&priv->hw->chan[i].dma);
+ }
+ priv->hw->chan[i].refcount++;
+ spin_unlock_bh(&priv->hw->chan[i].lock);
+ }
+ for (i = 0; i < priv->num_port; i++)
+ if (priv->port[i].phydev)
+ phy_start(priv->port[i].phydev);
+ netif_wake_queue(dev);
+
+ return 0;
+}
+
+static int xrx200_close(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ int i;
+
+ netif_stop_queue(dev);
+
+ for (i = 0; i < priv->num_port; i++)
+ if (priv->port[i].phydev)
+ phy_stop(priv->port[i].phydev);
+
+ for (i = 0; i < XRX200_MAX_DMA; i++) {
+ if (!priv->hw->chan[i].dma.irq)
+ continue;
+ spin_lock_bh(&priv->hw->chan[i].lock);
+ priv->hw->chan[i].refcount--;
+ if (!priv->hw->chan[i].refcount) {
+ if (XRX200_DMA_IS_RX(i))
+ napi_disable(&priv->hw->chan[i].napi);
+ ltq_dma_close(&priv->hw->chan[XRX200_DMA_RX].dma);
+ }
+ spin_unlock_bh(&priv->hw->chan[i].lock);
+ }
+
+ return 0;
+}
+
+static int xrx200_alloc_skb(struct xrx200_chan *ch)
+{
+#define DMA_PAD (NET_IP_ALIGN + NET_SKB_PAD)
+ ch->skb[ch->dma.desc] = dev_alloc_skb(XRX200_DMA_DATA_LEN + DMA_PAD);
+ if (!ch->skb[ch->dma.desc])
+ goto skip;
+
+ skb_reserve(ch->skb[ch->dma.desc], NET_SKB_PAD);
+ ch->dma.desc_base[ch->dma.desc].addr = dma_map_single(NULL,
+ ch->skb[ch->dma.desc]->data, XRX200_DMA_DATA_LEN,
+ DMA_FROM_DEVICE);
+ ch->dma.desc_base[ch->dma.desc].addr =
+ CPHYSADDR(ch->skb[ch->dma.desc]->data);
+ skb_reserve(ch->skb[ch->dma.desc], NET_IP_ALIGN);
+
+skip:
+ ch->dma.desc_base[ch->dma.desc].ctl =
+ LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
+ XRX200_DMA_DATA_LEN;
+
+ return 0;
+}
+
+static void xrx200_hw_receive(struct xrx200_chan *ch, int id)
+{
+ struct net_device *dev = ch->devs[id];
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
+ int ret;
+
+ ret = xrx200_alloc_skb(ch);
+
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+
+ if (ret) {
+ netdev_err(dev,
+ "failed to allocate new rx buffer\n");
+ return;
+ }
+
+ skb_put(skb, len);
+#ifdef SW_ROUTING
+ skb_pull(skb, 8);
+#endif
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_receive_skb(skb);
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes+=len;
+}
+
+static int xrx200_poll_rx(struct napi_struct *napi, int budget)
+{
+ struct xrx200_chan *ch = container_of(napi,
+ struct xrx200_chan, napi);
+ struct xrx200_priv *priv = netdev_priv(ch->devs[0]);
+ int rx = 0;
+ int complete = 0;
+
+ while ((rx < budget) && !complete) {
+ struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+#ifdef SW_ROUTING
+ struct sk_buff *skb = ch->skb[ch->dma.desc];
+ u8 *special_tag = (u8*)skb->data;
+ int port = (special_tag[7] >> SPPID_SHIFT) & SPPID_MASK;
+ xrx200_hw_receive(ch, priv->hw->port_map[port]);
+#else
+ xrx200_hw_receive(ch, 0);
+#endif
+ rx++;
+ } else {
+ complete = 1;
+ }
+ }
+
+ if (complete || !rx) {
+ napi_complete(&ch->napi);
+ ltq_dma_enable_irq(&ch->dma);
+ }
+
+ return rx;
+}
+
+static void xrx200_tx_housekeeping(unsigned long ptr)
+{
+ struct xrx200_chan *ch = (struct xrx200_chan *) ptr;
+ int pkts = 0;
+ int i;
+
+ spin_lock_bh(&ch->lock);
+ ltq_dma_ack_irq(&ch->dma);
+ while ((ch->dma.desc_base[ch->tx_free].ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) == LTQ_DMA_C) {
+ struct sk_buff *skb = ch->skb[ch->tx_free];
+
+ pkts++;
+ ch->skb[ch->tx_free] = NULL;
+ dev_kfree_skb(skb);
+ memset(&ch->dma.desc_base[ch->tx_free], 0,
+ sizeof(struct ltq_dma_desc));
+ ch->tx_free++;
+ ch->tx_free %= LTQ_DESC_NUM;
+ }
+ ltq_dma_enable_irq(&ch->dma);
+ spin_unlock_bh(&ch->lock);
+
+ if (!pkts)
+ return;
+
+ for (i = 0; i < XRX200_MAX_DEV && ch->devs[i]; i++)
+ netif_wake_queue(ch->devs[i]);
+}
+
+static struct net_device_stats *xrx200_get_stats (struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+
+ return &priv->stats;
+}
+
+static void xrx200_tx_timeout(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+
+ printk(KERN_ERR "%s: transmit timed out, disable the dma channel irq\n", dev->name);
+
+ priv->stats.tx_errors++;
+ netif_wake_queue(dev);
+}
+
+static int xrx200_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct xrx200_chan *ch;
+ struct ltq_dma_desc *desc;
+ u32 byte_offset;
+ int ret = NETDEV_TX_OK;
+ int len;
+#ifdef SW_ROUTING
+ u32 special_tag = (SPID_CPU_PORT << SPID_SHIFT) | DPID_ENABLE;
+#endif
+ if(priv->id)
+ ch = &priv->hw->chan[XRX200_DMA_TX_2];
+ else
+ ch = &priv->hw->chan[XRX200_DMA_TX];
+
+ desc = &ch->dma.desc_base[ch->dma.desc];
+
+ skb->dev = dev;
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+
+#ifdef SW_ROUTING
+ if (is_multicast_ether_addr(eth_hdr(skb)->h_dest)) {
+ u16 port_map = priv->port_map;
+
+ if (priv->sw && skb->protocol == htons(ETH_P_8021Q)) {
+ u16 vid;
+ int i;
+
+ port_map = 0;
+ if (!__vlan_get_tag(skb, &vid)) {
+ for (i = 0; i < XRX200_MAX_VLAN; i++) {
+ if (priv->hw->vlan_vid[i] != vid)
+ continue;
+ port_map = priv->hw->vlan_port_map[i];
+ break;
+ }
+ }
+ }
+
+ special_tag |= (port_map << PORT_MAP_SHIFT) |
+ PORT_MAP_SEL | PORT_MAP_EN;
+ }
+ if(priv->wan)
+ special_tag |= (1 << DPID_SHIFT);
+ if(skb_headroom(skb) < 4) {
+ struct sk_buff *tmp = skb_realloc_headroom(skb, 4);
+ dev_kfree_skb_any(skb);
+ skb = tmp;
+ }
+ skb_push(skb, 4);
+ memcpy(skb->data, &special_tag, sizeof(u32));
+ len += 4;
+#endif
+
+ /* dma needs to start on a 16 byte aligned address */
+ byte_offset = CPHYSADDR(skb->data) % 16;
+
+ spin_lock_bh(&ch->lock);
+ if ((desc->ctl & (LTQ_DMA_OWN | LTQ_DMA_C)) || ch->skb[ch->dma.desc]) {
+ netdev_err(dev, "tx ring full\n");
+ netif_stop_queue(dev);
+ ret = NETDEV_TX_BUSY;
+ goto out;
+ }
+
+ ch->skb[ch->dma.desc] = skb;
+
+ dev->trans_start = jiffies;
+
+ desc->addr = ((unsigned int) dma_map_single(NULL, skb->data, len,
+ DMA_TO_DEVICE)) - byte_offset;
+ wmb();
+ desc->ctl = LTQ_DMA_OWN | LTQ_DMA_SOP | LTQ_DMA_EOP |
+ LTQ_DMA_TX_OFFSET(byte_offset) | (len & LTQ_DMA_SIZE_MASK);
+ ch->dma.desc++;
+ ch->dma.desc %= LTQ_DESC_NUM;
+ if (ch->dma.desc == ch->tx_free)
+ netif_stop_queue(dev);
+
+
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes+=len;
+
+out:
+ spin_unlock_bh(&ch->lock);
+
+ return ret;
+}
+
+static irqreturn_t xrx200_dma_irq(int irq, void *priv)
+{
+ struct xrx200_hw *hw = priv;
+ int chnr = irq - XRX200_DMA_IRQ;
+ struct xrx200_chan *ch = &hw->chan[chnr];
+
+ ltq_dma_disable_irq(&ch->dma);
+ ltq_dma_ack_irq(&ch->dma);
+
+ if (chnr % 2)
+ tasklet_schedule(&ch->tasklet);
+ else
+ napi_schedule(&ch->napi);
+
+ return IRQ_HANDLED;
+}
+
+static int xrx200_dma_init(struct xrx200_hw *hw)
+{
+ int i, err = 0;
+
+ ltq_dma_init_port(DMA_PORT_ETOP);
+
+ for (i = 0; i < 8 && !err; i++) {
+ int irq = XRX200_DMA_IRQ + i;
+ struct xrx200_chan *ch = &hw->chan[i];
+
+ spin_lock_init(&ch->lock);
+
+ ch->idx = ch->dma.nr = i;
+
+ if (i == XRX200_DMA_TX) {
+ ltq_dma_alloc_tx(&ch->dma);
+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx", hw);
+ } else if (i == XRX200_DMA_TX_2) {
+ ltq_dma_alloc_tx(&ch->dma);
+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_tx_2", hw);
+ } else if (i == XRX200_DMA_RX) {
+ ltq_dma_alloc_rx(&ch->dma);
+ for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
+ ch->dma.desc++)
+ if (xrx200_alloc_skb(ch))
+ err = -ENOMEM;
+ ch->dma.desc = 0;
+ err = request_irq(irq, xrx200_dma_irq, 0, "vrx200_rx", hw);
+ } else
+ continue;
+
+ if (!err)
+ ch->dma.irq = irq;
+ else
+ pr_err("net-xrx200: failed to request irq %d\n", irq);
+ }
+
+ return err;
+}
+
+#ifdef SW_POLLING
+static void xrx200_gmac_update(struct xrx200_port *port)
+{
+ u16 phyaddr = port->phydev->addr & MDIO_PHY_ADDR_MASK;
+ u16 miimode = ltq_mii_r32(MII_CFG(port->num)) & MII_CFG_MODE_MASK;
+ u16 miirate = 0;
+
+ switch (port->phydev->speed) {
+ case SPEED_1000:
+ phyaddr |= MDIO_PHY_SPEED_G1;
+ miirate = MII_CFG_RATE_M125;
+ break;
+
+ case SPEED_100:
+ phyaddr |= MDIO_PHY_SPEED_M100;
+ switch (miimode) {
+ case MII_CFG_MODE_RMIIM:
+ case MII_CFG_MODE_RMIIP:
+ miirate = MII_CFG_RATE_M50;
+ break;
+ default:
+ miirate = MII_CFG_RATE_M25;
+ break;
+ }
+ break;
+
+ default:
+ phyaddr |= MDIO_PHY_SPEED_M10;
+ miirate = MII_CFG_RATE_M2P5;
+ break;
+ }
+
+ if (port->phydev->link)
+ phyaddr |= MDIO_PHY_LINK_UP;
+ else
+ phyaddr |= MDIO_PHY_LINK_DOWN;
+
+ if (port->phydev->duplex == DUPLEX_FULL)
+ phyaddr |= MDIO_PHY_FDUP_EN;
+ else
+ phyaddr |= MDIO_PHY_FDUP_DIS;
+
+ ltq_mdio_w32_mask(MDIO_UPDATE_MASK, phyaddr, MDIO_PHY(port->num));
+ ltq_mii_w32_mask(MII_CFG_RATE_MASK, miirate, MII_CFG(port->num));
+ udelay(1);
+}
+#else
+static void xrx200_gmac_update(struct xrx200_port *port)
+{
+
+}
+#endif
+
+static void xrx200_mdio_link(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ bool changed = false, link = false;
+ int i;
+
+ for (i = 0; i < priv->num_port; i++) {
+ if (!priv->port[i].phydev)
+ continue;
+
+ if (priv->port[i].phydev->link)
+ link = true;
+
+ if (priv->port[i].link != priv->port[i].phydev->link) {
+ changed = true;
+ xrx200_gmac_update(&priv->port[i]);
+ priv->port[i].link = priv->port[i].phydev->link;
+ netdev_info(dev, "port %d %s link\n",
+ priv->port[i].num,
+ (priv->port[i].link)?("got"):("lost"));
+ }
+ }
+ if (changed && !link)
+ netif_carrier_off(dev);
+}
+
+static inline int xrx200_mdio_poll(struct mii_bus *bus)
+{
+ unsigned cnt = 10000;
+
+ while (likely(cnt--)) {
+ unsigned ctrl = ltq_mdio_r32(MDIO_CTRL);
+ if ((ctrl & MDIO_BUSY) == 0)
+ return 0;
+ }
+
+ return 1;
+}
+
+static int xrx200_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+ if (xrx200_mdio_poll(bus))
+ return 1;
+
+ ltq_mdio_w32(val, MDIO_WRITE);
+ ltq_mdio_w32(MDIO_BUSY | MDIO_WR |
+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
+ (reg & MDIO_MASK),
+ MDIO_CTRL);
+
+ return 0;
+}
+
+static int xrx200_mdio_rd(struct mii_bus *bus, int addr, int reg)
+{
+ if (xrx200_mdio_poll(bus))
+ return -1;
+
+ ltq_mdio_w32(MDIO_BUSY | MDIO_RD |
+ ((addr & MDIO_MASK) << MDIO_ADDRSHIFT) |
+ (reg & MDIO_MASK),
+ MDIO_CTRL);
+
+ if (xrx200_mdio_poll(bus))
+ return -1;
+
+ return ltq_mdio_r32(MDIO_READ);
+}
+
+static int xrx200_mdio_probe(struct net_device *dev, struct xrx200_port *port)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct phy_device *phydev = NULL;
+ unsigned val;
+
+ phydev = priv->hw->mii_bus->phy_map[port->phy_addr];
+
+ if (!phydev) {
+ netdev_err(dev, "no PHY found\n");
+ return -ENODEV;
+ }
+
+ phydev = phy_connect(dev, dev_name(&phydev->dev), &xrx200_mdio_link,
+ port->phy_if);
+
+ if (IS_ERR(phydev)) {
+ netdev_err(dev, "Could not attach to PHY\n");
+ return PTR_ERR(phydev);
+ }
+
+ phydev->supported &= (SUPPORTED_10baseT_Half
+ | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half
+ | SUPPORTED_100baseT_Full
+ | SUPPORTED_1000baseT_Half
+ | SUPPORTED_1000baseT_Full
+ | SUPPORTED_Autoneg
+ | SUPPORTED_MII
+ | SUPPORTED_TP);
+ phydev->advertising = phydev->supported;
+ port->phydev = phydev;
+ phydev->no_auto_carrier_off = true;
+
+ pr_info("%s: attached PHY [%s] (phy_addr=%s, irq=%d)\n",
+ dev->name, phydev->drv->name,
+ dev_name(&phydev->dev), phydev->irq);
+
+#ifdef SW_POLLING
+ phy_read_status(phydev);
+
+ val = xrx200_mdio_rd(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000);
+ val |= ADVERTIZE_MPD;
+ xrx200_mdio_wr(priv->hw->mii_bus, MDIO_DEVAD_NONE, MII_CTRL1000, val);
+ xrx200_mdio_wr(priv->hw->mii_bus, 0, 0, 0x1040);
+
+ phy_start_aneg(phydev);
+#endif
+ return 0;
+}
+
+static void xrx200_port_config(struct xrx200_priv *priv,
+ const struct xrx200_port *port)
+{
+ u16 miimode = 0;
+
+ switch (port->num) {
+ case 0: /* xMII0 */
+ case 1: /* xMII1 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ if (port->flags & XRX200_PORT_TYPE_PHY)
+ /* MII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_MIIM;
+ else
+ /* MII PHY mode, connected to external MAC */
+ miimode = MII_CFG_MODE_MIIP;
+ break;
+ case PHY_INTERFACE_MODE_RMII:
+ if (port->flags & XRX200_PORT_TYPE_PHY)
+ /* RMII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_RMIIM;
+ else
+ /* RMII PHY mode, connected to external MAC */
+ miimode = MII_CFG_MODE_RMIIP;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* RGMII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_RGMII;
+ break;
+ default:
+ break;
+ }
+ break;
+ case 2: /* internal GPHY0 */
+ case 3: /* internal GPHY0 */
+ case 4: /* internal GPHY1 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ case PHY_INTERFACE_MODE_GMII:
+ /* MII MAC mode, connected to internal GPHY */
+ miimode = MII_CFG_MODE_MIIM;
+ break;
+ default:
+ break;
+ }
+ break;
+ case 5: /* internal GPHY1 or xMII2 */
+ switch (port->phy_if) {
+ case PHY_INTERFACE_MODE_MII:
+ /* MII MAC mode, connected to internal GPHY */
+ miimode = MII_CFG_MODE_MIIM;
+ break;
+ case PHY_INTERFACE_MODE_RGMII:
+ /* RGMII MAC mode, connected to external PHY */
+ miimode = MII_CFG_MODE_RGMII;
+ break;
+ default:
+ break;
+ }
+ break;
+ default:
+ break;
+ }
+
+ ltq_mii_w32_mask(MII_CFG_MODE_MASK, miimode | MII_CFG_EN,
+ MII_CFG(port->num));
+}
+
+static int xrx200_init(struct net_device *dev)
+{
+ struct xrx200_priv *priv = netdev_priv(dev);
+ struct sockaddr mac;
+ int err, i;
+
+#ifndef SW_POLLING
+ unsigned int reg = 0;
+
+ /* enable auto polling */
+ for (i = 0; i < priv->num_port; i++)
+ reg |= BIT(priv->port[i].num);
+ ltq_mdio_w32(reg, MDIO_CLK_CFG0);
+ ltq_mdio_w32(MDIO1_25MHZ, MDIO_CLK_CFG1);
+#endif
+
+ /* setup each port */
+ for (i = 0; i < priv->num_port; i++)
+ xrx200_port_config(priv, &priv->port[i]);
+
+ memcpy(&mac.sa_data, priv->mac, ETH_ALEN);
+ if (!is_valid_ether_addr(mac.sa_data)) {
+ pr_warn("net-xrx200: invalid MAC, using random\n");
+ eth_random_addr(mac.sa_data);
+ dev->addr_assign_type |= NET_ADDR_RANDOM;
+ }
+
+ err = eth_mac_addr(dev, &mac);
+ if (err)
+ goto err_netdev;
+
+ for (i = 0; i < priv->num_port; i++)
+ if (xrx200_mdio_probe(dev, &priv->port[i]))
+ pr_warn("xrx200-mdio: probing phy of port %d failed\n",
+ priv->port[i].num);
+
+ return 0;
+
+err_netdev:
+ unregister_netdev(dev);
+ free_netdev(dev);
+ return err;
+}
+
+static void xrx200_pci_microcode(void)
+{
+ int i;
+
+ ltq_switch_w32_mask(PCE_TBL_CFG_ADDR_MASK | PCE_TBL_CFG_ADWR_MASK,
+ PCE_TBL_CFG_ADWR, PCE_TBL_CTRL);
+ ltq_switch_w32(0, PCE_TBL_MASK);
+
+ for (i = 0; i < ARRAY_SIZE(pce_microcode); i++) {
+ ltq_switch_w32(i, PCE_TBL_ADDR);
+ ltq_switch_w32(pce_microcode[i].val[3], PCE_TBL_VAL(0));
+ ltq_switch_w32(pce_microcode[i].val[2], PCE_TBL_VAL(1));
+ ltq_switch_w32(pce_microcode[i].val[1], PCE_TBL_VAL(2));
+ ltq_switch_w32(pce_microcode[i].val[0], PCE_TBL_VAL(3));
+
+ // start the table access:
+ ltq_switch_w32_mask(0, PCE_TBL_BUSY, PCE_TBL_CTRL);
+ while (ltq_switch_r32(PCE_TBL_CTRL) & PCE_TBL_BUSY);
+ }
+
+ /* tell the switch that the microcode is loaded */
+ ltq_switch_w32_mask(0, BIT(3), PCE_GCTRL_REG(0));
+}
+
+static void xrx200_hw_init(struct xrx200_hw *hw)
+{
+ int i;
+
+ /* enable clock gate */
+ clk_enable(hw->clk);
+
+ ltq_switch_w32(1, 0);
+ mdelay(100);
+ ltq_switch_w32(0, 0);
+ /*
+ * TODO: we should really disbale all phys/miis here and explicitly
+ * enable them in the device secific init function
+ */
+
+ /* disable port fetch/store dma */
+ for (i = 0; i < 7; i++ ) {
+ ltq_switch_w32(0, FDMA_PCTRLx(i));
+ ltq_switch_w32(0, SDMA_PCTRLx(i));
+ }
+
+ /* enable Switch */
+ ltq_mdio_w32_mask(0, MDIO_GLOB_ENABLE, MDIO_GLOB);
+
+ /* load the pce microcode */
+ xrx200_pci_microcode();
+
+ /* Default unknown Broadcat/Multicast/Unicast port maps */
+ ltq_switch_w32(0x40, PCE_PMAP1);
+ ltq_switch_w32(0x40, PCE_PMAP2);
+ ltq_switch_w32(0x40, PCE_PMAP3);
+
+ /* RMON Counter Enable for all physical ports */
+ for (i = 0; i < 7; i++)
+ ltq_switch_w32(0x1, BM_PCFG(i));
+
+ /* disable auto polling */
+ ltq_mdio_w32(0x0, MDIO_CLK_CFG0);
+
+ /* enable port statistic counters */
+ for (i = 0; i < 7; i++)
+ ltq_switch_w32(0x1, BM_PCFGx(i));
+
+ /* set IPG to 12 */
+ ltq_pmac_w32_mask(PMAC_IPG_MASK, 0xb, PMAC_RX_IPG);
+
+#ifdef SW_ROUTING
+ /* enable status header, enable CRC */
+ ltq_pmac_w32_mask(0,
+ PMAC_HD_CTL_RST | PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS | PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
+ PMAC_HD_CTL);
+#else
+ /* disable status header, enable CRC */
+ ltq_pmac_w32_mask(PMAC_HD_CTL_AST | PMAC_HD_CTL_RXSH | PMAC_HD_CTL_AS,
+ PMAC_HD_CTL_AC | PMAC_HD_CTL_RC,
+ PMAC_HD_CTL);
+#endif
+
+ /* enable port fetch/store dma & VLAN Modification */
+ for (i = 0; i < 7; i++ ) {
+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
+ ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
+ }
+
+ /* enable special tag insertion on cpu port */
+ ltq_switch_w32_mask(0, 0x02, FDMA_PCTRLx(6));
+ ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(6, 0));
+ ltq_switch_w32_mask(0, BIT(3), MAC_CTRL_REG(6, 2));
+ ltq_switch_w32(1518 + 8 + 4 * 2, MAC_FLEN_REG);
+ xrx200sw_write_x(1, XRX200_BM_QUEUE_GCTRL_GL_MOD, 0);
+
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
+ hw->vlan_vid[i] = i;
+}
+
+static void xrx200_hw_cleanup(struct xrx200_hw *hw)
+{
+ int i;
+
+ /* disable the switch */
+ ltq_mdio_w32_mask(MDIO_GLOB_ENABLE, 0, MDIO_GLOB);
+
+ /* free the channels and IRQs */
+ for (i = 0; i < 2; i++) {
+ ltq_dma_free(&hw->chan[i].dma);
+ if (hw->chan[i].dma.irq)
+ free_irq(hw->chan[i].dma.irq, hw);
+ }
+
+ /* free the allocated RX ring */
+ for (i = 0; i < LTQ_DESC_NUM; i++)
+ dev_kfree_skb_any(hw->chan[XRX200_DMA_RX].skb[i]);
+
+ /* clear the mdio bus */
+ mdiobus_unregister(hw->mii_bus);
+ mdiobus_free(hw->mii_bus);
+
+ /* release the clock */
+ clk_disable(hw->clk);
+ clk_put(hw->clk);
+}
+
+static int xrx200_of_mdio(struct xrx200_hw *hw, struct device_node *np)
+{
+ hw->mii_bus = mdiobus_alloc();
+ if (!hw->mii_bus)
+ return -ENOMEM;
+
+ hw->mii_bus->read = xrx200_mdio_rd;
+ hw->mii_bus->write = xrx200_mdio_wr;
+ hw->mii_bus->name = "lantiq,xrx200-mdio";
+ snprintf(hw->mii_bus->id, MII_BUS_ID_SIZE, "%x", 0);
+
+ if (of_mdiobus_register(hw->mii_bus, np)) {
+ mdiobus_free(hw->mii_bus);
+ return -ENXIO;
+ }
+
+ return 0;
+}
+
+static void xrx200_of_port(struct xrx200_priv *priv, struct device_node *port)
+{
+ const __be32 *addr, *id = of_get_property(port, "reg", NULL);
+ struct xrx200_port *p = &priv->port[priv->num_port];
+
+ if (!id)
+ return;
+
+ memset(p, 0, sizeof(struct xrx200_port));
+ p->phy_node = of_parse_phandle(port, "phy-handle", 0);
+ addr = of_get_property(p->phy_node, "reg", NULL);
+ if (!addr)
+ return;
+
+ p->num = *id;
+ p->phy_addr = *addr;
+ p->phy_if = of_get_phy_mode(port);
+ if (p->phy_addr > 0x10)
+ p->flags = XRX200_PORT_TYPE_MAC;
+ else
+ p->flags = XRX200_PORT_TYPE_PHY;
+ priv->num_port++;
+
+ p->gpio = of_get_gpio_flags(port, 0, &p->gpio_flags);
+ if (gpio_is_valid(p->gpio))
+ if (!gpio_request(p->gpio, "phy-reset")) {
+ gpio_direction_output(p->gpio,
+ (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (1) : (0));
+ udelay(100);
+ gpio_set_value(p->gpio, (p->gpio_flags & OF_GPIO_ACTIVE_LOW) ? (0) : (1));
+ }
+ /* is this port a wan port ? */
+ if (priv->wan)
+ priv->hw->wan_map |= BIT(p->num);
+
+ priv->port_map |= BIT(p->num);
+
+ /* store the port id in the hw struct so we can map ports -> devices */
+ priv->hw->port_map[p->num] = priv->hw->num_devs;
+}
+
+static const struct net_device_ops xrx200_netdev_ops = {
+ .ndo_init = xrx200_init,
+ .ndo_open = xrx200_open,
+ .ndo_stop = xrx200_close,
+ .ndo_start_xmit = xrx200_start_xmit,
+ .ndo_set_mac_address = eth_mac_addr,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+ .ndo_get_stats = xrx200_get_stats,
+ .ndo_tx_timeout = xrx200_tx_timeout,
+};
+
+static void xrx200_of_iface(struct xrx200_hw *hw, struct device_node *iface)
+{
+ struct xrx200_priv *priv;
+ struct device_node *port;
+ const __be32 *wan;
+ const u8 *mac;
+
+ /* alloc the network device */
+ hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
+ if (!hw->devs[hw->num_devs])
+ return;
+
+ /* setup the network device */
+ strcpy(hw->devs[hw->num_devs]->name, "eth%d");
+ hw->devs[hw->num_devs]->netdev_ops = &xrx200_netdev_ops;
+ hw->devs[hw->num_devs]->watchdog_timeo = XRX200_TX_TIMEOUT;
+ hw->devs[hw->num_devs]->needed_headroom = XRX200_HEADROOM;
+
+ /* setup our private data */
+ priv = netdev_priv(hw->devs[hw->num_devs]);
+ priv->hw = hw;
+ priv->id = hw->num_devs;
+
+ mac = of_get_mac_address(iface);
+ if (mac)
+ memcpy(priv->mac, mac, ETH_ALEN);
+
+ /* is this the wan interface ? */
+ wan = of_get_property(iface, "lantiq,wan", NULL);
+ if (wan && (*wan == 1))
+ priv->wan = 1;
+
+ /* should the switch be enabled on this interface ? */
+ if (of_find_property(iface, "lantiq,switch", NULL))
+ priv->sw = 1;
+
+ /* load the ports that are part of the interface */
+ for_each_child_of_node(iface, port)
+ if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
+ xrx200_of_port(priv, port);
+
+ /* register the actual device */
+ if (!register_netdev(hw->devs[hw->num_devs]))
+ hw->num_devs++;
+}
+
+static struct xrx200_hw xrx200_hw;
+
+static int xrx200_probe(struct platform_device *pdev)
+{
+ struct resource *res[4];
+ struct device_node *mdio_np, *iface_np;
+ int i;
+
+ /* load the memory ranges */
+ for (i = 0; i < 4; i++) {
+ res[i] = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!res[i]) {
+ dev_err(&pdev->dev, "failed to get resources\n");
+ return -ENOENT;
+ }
+ }
+ xrx200_switch_membase = devm_ioremap_resource(&pdev->dev, res[0]);
+ xrx200_mdio_membase = devm_ioremap_resource(&pdev->dev, res[1]);
+ xrx200_mii_membase = devm_ioremap_resource(&pdev->dev, res[2]);
+ xrx200_pmac_membase = devm_ioremap_resource(&pdev->dev, res[3]);
+ if (!xrx200_switch_membase || !xrx200_mdio_membase ||
+ !xrx200_mii_membase || !xrx200_pmac_membase) {
+ dev_err(&pdev->dev, "failed to request and remap io ranges \n");
+ return -ENOMEM;
+ }
+
+ /* get the clock */
+ xrx200_hw.clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(xrx200_hw.clk)) {
+ dev_err(&pdev->dev, "failed to get clock\n");
+ return PTR_ERR(xrx200_hw.clk);
+ }
+
+ /* bring up the dma engine and IP core */
+ xrx200_dma_init(&xrx200_hw);
+ xrx200_hw_init(&xrx200_hw);
+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX]);
+ tasklet_init(&xrx200_hw.chan[XRX200_DMA_TX_2].tasklet, xrx200_tx_housekeeping, (u32) &xrx200_hw.chan[XRX200_DMA_TX_2]);
+
+ /* bring up the mdio bus */
+ mdio_np = of_find_compatible_node(pdev->dev.of_node, NULL,
+ "lantiq,xrx200-mdio");
+ if (mdio_np)
+ if (xrx200_of_mdio(&xrx200_hw, mdio_np))
+ dev_err(&pdev->dev, "mdio probe failed\n");
+
+ /* load the interfaces */
+ for_each_child_of_node(pdev->dev.of_node, iface_np)
+ if (of_device_is_compatible(iface_np, "lantiq,xrx200-pdi")) {
+ if (xrx200_hw.num_devs < XRX200_MAX_DEV)
+ xrx200_of_iface(&xrx200_hw, iface_np);
+ else
+ dev_err(&pdev->dev,
+ "only %d interfaces allowed\n",
+ XRX200_MAX_DEV);
+ }
+
+ if (!xrx200_hw.num_devs) {
+ xrx200_hw_cleanup(&xrx200_hw);
+ dev_err(&pdev->dev, "failed to load interfaces\n");
+ return -ENOENT;
+ }
+
+ xrx200sw_init(&xrx200_hw);
+
+ /* set wan port mask */
+ ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
+
+ for (i = 0; i < xrx200_hw.num_devs; i++) {
+ xrx200_hw.chan[XRX200_DMA_RX].devs[i] = xrx200_hw.devs[i];
+ xrx200_hw.chan[XRX200_DMA_TX].devs[i] = xrx200_hw.devs[i];
+ xrx200_hw.chan[XRX200_DMA_TX_2].devs[i] = xrx200_hw.devs[i];
+ }
+
+ /* setup NAPI */
+ init_dummy_netdev(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev);
+ netif_napi_add(&xrx200_hw.chan[XRX200_DMA_RX].dummy_dev,
+ &xrx200_hw.chan[XRX200_DMA_RX].napi, xrx200_poll_rx, 32);
+
+ platform_set_drvdata(pdev, &xrx200_hw);
+
+ return 0;
+}
+
+static int xrx200_remove(struct platform_device *pdev)
+{
+ struct net_device *dev = platform_get_drvdata(pdev);
+ struct xrx200_priv *priv;
+
+ if (!dev)
+ return 0;
+
+ priv = netdev_priv(dev);
+
+ /* free stack related instances */
+ netif_stop_queue(dev);
+ netif_napi_del(&xrx200_hw.chan[XRX200_DMA_RX].napi);
+
+ /* shut down hardware */
+ xrx200_hw_cleanup(&xrx200_hw);
+
+ /* remove the actual device */
+ unregister_netdev(dev);
+ free_netdev(dev);
+
+ return 0;
+}
+
+static const struct of_device_id xrx200_match[] = {
+ { .compatible = "lantiq,xrx200-net" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xrx200_match);
+
+static struct platform_driver xrx200_driver = {
+ .probe = xrx200_probe,
+ .remove = xrx200_remove,
+ .driver = {
+ .name = "lantiq,xrx200-net",
+ .of_match_table = xrx200_match,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver(xrx200_driver);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("Lantiq SoC XRX200 ethernet");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
@@ -0,0 +1,1328 @@
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
+ *
+ * VR9 switch registers extracted from 310TUJ0 switch api
+ * WARNING mult values of 0x00 may not be correct
+ *
+ */
+
+enum {
+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
+ XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
+// XRX200_BM_CISEL_PORT, /* Port Number */
+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
+// XRX200_MAC_TEST, /* MAC Test Register */
+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
+// XRX200_SDMA_IER_FERR, /* Frame Error */
+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
+// XRX200_SDMA_ISR_FERR, /* Frame Error */
+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
+};
+
+
+struct xrx200sw_reg {
+ int offset;
+ int shift;
+ int size;
+ int mult;
+} xrx200sw_reg[] = {
+// offeset shift size mult
+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
+ {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
+};
+
+