2b1c6b21b5
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Also adds support for Raspberry Pi Compute Module 3 (untested). Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
106 lines
3 KiB
Diff
106 lines
3 KiB
Diff
From fbbafbb2b4739eb6980f18c78c276ffbee2602db Mon Sep 17 00:00:00 2001
|
|
From: Erdem MEYDANLI <erdem.meydanli@punica.com.tr>
|
|
Date: Thu, 30 Jun 2016 21:05:08 +0300
|
|
Subject: [PATCH] dts: Add overlay for NXP SC16IS752 Dual UART with SPI
|
|
Interface
|
|
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 10 ++++
|
|
.../boot/dts/overlays/sc16is752-spi1-overlay.dts | 61 ++++++++++++++++++++++
|
|
3 files changed, 72 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -71,6 +71,7 @@ dtbo-$(RPI_DT_OVERLAYS) += rpi-ft5406.dt
|
|
dtbo-$(RPI_DT_OVERLAYS) += rpi-proto.dtbo
|
|
dtbo-$(RPI_DT_OVERLAYS) += rpi-sense.dtbo
|
|
dtbo-$(RPI_DT_OVERLAYS) += rra-digidac1-wm8741-audio.dtbo
|
|
+dtbo-$(RPI_DT_OVERLAYS) += sc16is752-spi1.dtbo
|
|
dtbo-$(RPI_DT_OVERLAYS) += sdhost.dtbo
|
|
dtbo-$(RPI_DT_OVERLAYS) += sdio.dtbo
|
|
dtbo-$(RPI_DT_OVERLAYS) += sdio-1bit.dtbo
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -888,6 +888,16 @@ Load: dtoverlay=rra-digidac1-wm8741-au
|
|
Params: <None>
|
|
|
|
|
|
+Name: sc16is752-spi1
|
|
+Info: Overlay for the NXP SC16IS752 Dual UART with SPI Interface
|
|
+ Enables the chip on SPI1.
|
|
+ N.B.: spi1 is only accessible on devices with a 40pin header, eg:
|
|
+ A+, B+, Zero and PI2 B; as well as the Compute Module.
|
|
+
|
|
+Load: dtoverlay=sc16is752-spi1,<param>=<val>
|
|
+Params: int_pin GPIO used for IRQ (default 24)
|
|
+
|
|
+
|
|
Name: sdhost
|
|
Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock.
|
|
N.B. This overlay is designed for situations where the mmc driver is
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/sc16is752-spi1-overlay.dts
|
|
@@ -0,0 +1,61 @@
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&gpio>;
|
|
+ __overlay__ {
|
|
+ spi1_pins: spi1_pins {
|
|
+ brcm,pins = <19 20 21>;
|
|
+ brcm,function = <3>; /* alt4 */
|
|
+ };
|
|
+
|
|
+ spi1_cs_pins: spi1_cs_pins {
|
|
+ brcm,pins = <18>;
|
|
+ brcm,function = <1>; /* output */
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spi1>;
|
|
+ frag1: __overlay__ {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+ pinctrl-names = "default";
|
|
+ pinctrl-0 = <&spi1_pins &spi1_cs_pins>;
|
|
+ cs-gpios = <&gpio 18 1>;
|
|
+ status = "okay";
|
|
+
|
|
+ sc16is752: sc16is752@0 {
|
|
+ compatible = "nxp,sc16is752";
|
|
+ reg = <0>; /* CE0 */
|
|
+ clocks = <&sc16is752_clk>;
|
|
+ interrupt-parent = <&gpio>;
|
|
+ interrupts = <24 2>; /* IRQ_TYPE_EDGE_FALLING */
|
|
+ #gpio-controller;
|
|
+ #gpio-cells = <2>;
|
|
+ spi-max-frequency = <4000000>;
|
|
+
|
|
+ sc16is752_clk: sc16is752_clk {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <14745600>;
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@2 {
|
|
+ target = <&aux>;
|
|
+ __overlay__ {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ int_pin = <&sc16is752>,"interrupts:0";
|
|
+ };
|
|
+};
|