Pawel Dembicki 20b09a2125 ramips: add support for Lava LR-25G001 ... The Lava LR-25G001 Wireless Router is based on the MT7620A SoC. Specification: - MediaTek MT7620A (580 Mhz) - 64 MB of RAM - 16 MB of FLASH - 1x 802.11bgn radio - 1x 802.11ac radio (MT7610EN) - 5x 10/100/1000 Mbps AR8337 Switch (1 WAN AND 4 LAN) - 2x external, detachable antennas - 1x USB 2.0 - UART (J3) header on PCB (57600 8n1) - 8x LED (3x GPIO-controlled), 2x button - JBOOT bootloader Known issues: - Work only three Gigabit ports (3/5, 1 WAN and 2LAN) Installation: Apply factory image via http web-gui or JBOOT recovery page How to revert to OEM firmware: - push the reset button and turn on the power. Wait until LED start blinking (~10sec.) - upload original factory image via JBOOT http (IP: 192.168.123.254) Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>		2018-11-26 12:16:52 +01:00
..
board.d	ramips: add support for Lava LR-25G001	2018-11-26 12:16:52 +01:00
hotplug.d	ramips: add support for Lava LR-25G001	2018-11-26 12:16:52 +01:00
init.d	treewide: use the generic board_name function	2017-07-15 23:13:34 +02:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
diag.sh	ramips: add support for indicating the boot state using multiple leds	2018-10-07 11:34:18 +02:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00