openwrtv3/target/linux/ar71xx/base-files/lib/upgrade
Filip Moc a639cbfd00 ar71xx: Add support for TP-Link MR6400
You can flash via tftp recovery (serve factory image as /mr6400_tp_recovery.bin
on 192.168.0.66/24, connect to any ethernet port and power on device while
holding the reset button). Flashing via OEM web interface does not work.

Hardware Specification (v1.0 EU):
 - SoC: QCA9531
 - Flash: Winbond W25Q64FV (8MiB)
 - RAM: EtronTech EM6AB160TSE-5G (64MiB)
 - Wireless: SoC platform only (2.4GHz b/g/n, 2x internal antenna)
 - Ethernet: 2NIC (3x100M + 1x100M)
 - WWAN: TP-LINK LTE MODULE (2x external detachable antenna)
 - Power: DC 12V 1A

Signed-off-by: Filip Moc <lede@moc6.cz>
2017-05-27 07:54:21 +02:00
..
allnet.sh ar71xx: Fix sysupgrades for Allnet and OpenMesh devices 2013-10-20 15:59:05 +00:00
dir825.sh ar71xx: use mtd_get_part_size helper 2013-07-20 09:26:57 +00:00
merakinand.sh ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway 2016-09-27 17:50:22 +02:00
openmesh.sh ar71xx: enable sysupgrade for the OpenMesh A40 2017-02-14 12:18:05 +01:00
platform.sh ar71xx: Add support for TP-Link MR6400 2017-05-27 07:54:21 +02:00