KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/target/linux/brcm2708/patches-4.9/950-0190-sound-Support-for-Dion-Audio-LOCO-V2-DAC-AMP-HAT.patch
Rafał Miłecki fce21ae4cc brcm2708: rename all patches from raspberrypi git tree to use 950 prefix 
Right now all brcm2708 patches are extracted from the non-mainline
raspberrypi/linux git tree. Many of them are hacks and/or are unneeded
in LEDE. Raspberry Pi is getting better and better mainline support so
it would be nice to finally start maintaining patches in a cleaner way:
1) Backport patches accepted in upstream tree
2) Start using upstream drivers
3) Pick only these patches that are needed for more complete support

Handling above tasks requires grouping patches - ideally using the same
prefixes as generic ones. It means we should rename existing patches to
use some high prefix. This will allow e.g. use 0xx for backported code.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-03-24 08:06:35 +01:00

251 lines
8.7 KiB
Diff
Raw Blame History

From a20dbe4972ea3df27f24c5397102e1346462a4f4 Mon Sep 17 00:00:00 2001
From: Miquel <miquelblauw@hotmail.com>
Date: Fri, 24 Feb 2017 20:51:06 +0100
Subject: [PATCH] sound: Support for Dion Audio LOCO-V2 DAC-AMP HAT
Signed-off-by: Miquel Blauw <info@dionaudio.nl>
---
arch/arm/boot/dts/overlays/Makefile | 1 +
arch/arm/boot/dts/overlays/README | 19 +++++
arch/arm/configs/bcm2709_defconfig | 1 +
arch/arm/configs/bcmrpi_defconfig | 1 +
sound/soc/bcm/Kconfig | 7 ++
sound/soc/bcm/Makefile | 2 +
sound/soc/bcm/dionaudio_loco-v2.c | 140 ++++++++++++++++++++++++++++++++++++
7 files changed, 171 insertions(+)
create mode 100644 sound/soc/bcm/dionaudio_loco-v2.c
--- a/arch/arm/boot/dts/overlays/Makefile
+++ b/arch/arm/boot/dts/overlays/Makefile
@@ -13,6 +13,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
bmp085_i2c-sensor.dtbo \
dht11.dtbo \
dionaudio-loco.dtbo \
+ dionaudio-loco-v2.dtbo \
dpi18.dtbo \
dpi24.dtbo \
dwc-otg.dtbo \
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -308,6 +308,25 @@ Load: dtoverlay=dionaudio-loco
Params: <None>
+Name: dionaudio-loco-v2
+Info: Configures the Dion Audio LOCO-V2 DAC-AMP
+Load: dtoverlay=dionaudio-loco-v2,<param>=<val>
+Params: 24db_digital_gain Allow gain to be applied via the PCM512x codec
+ Digital volume control. Enable with
+ "dtoverlay=hifiberry-dacplus,24db_digital_gain"
+ (The default behaviour is that the Digital
+ volume control is limited to a maximum of
+ 0dB. ie. it can attenuate but not provide
+ gain. For most users, this will be desired
+ as it will prevent clipping. By appending
+ the 24dB_digital_gain parameter, the Digital
+ volume control will allow up to 24dB of
+ gain. If this parameter is enabled, it is the
+ responsibility of the user to ensure that
+ the Digital volume control is set to a value
+ that does not result in clipping/distortion!)
+
+
Name: dpi18
Info: Overlay for a generic 18-bit DPI display
This uses GPIOs 0-21 (so no I2C, uart etc.), and activates the output
--- a/arch/arm/configs/bcm2709_defconfig
+++ b/arch/arm/configs/bcm2709_defconfig
@@ -889,6 +889,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
CONFIG_SND_DIGIDAC1_SOUNDCARD=m
CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m
+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m
CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
CONFIG_SND_PISOUND=m
CONFIG_SND_SOC_ADAU1701=m
--- a/arch/arm/configs/bcmrpi_defconfig
+++ b/arch/arm/configs/bcmrpi_defconfig
@@ -883,6 +883,7 @@ CONFIG_SND_BCM2708_SOC_ADAU1977_ADC=m
CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD=m
CONFIG_SND_DIGIDAC1_SOUNDCARD=m
CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO=m
+CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2=m
CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC=m
CONFIG_SND_PISOUND=m
CONFIG_SND_SOC_ADAU1701=m
--- a/sound/soc/bcm/Kconfig
+++ b/sound/soc/bcm/Kconfig
@@ -133,6 +133,13 @@ config SND_BCM2708_SOC_DIONAUDIO_LOCO
help
Say Y or M if you want to add support for Dion Audio LOCO.
+config SND_BCM2708_SOC_DIONAUDIO_LOCO_V2
+ tristate "Support for Dion Audio LOCO-V2 DAC-AMP"
+ depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
+ select SND_SOC_PCM5122
+ help
+ Say Y or M if you want to add support for Dion Audio LOCO-V2.
+
config SND_BCM2708_SOC_ALLO_PIANO_DAC
tristate "Support for Allo Piano DAC"
depends on SND_BCM2708_SOC_I2S || SND_BCM2835_SOC_I2S
--- a/sound/soc/bcm/Makefile
+++ b/sound/soc/bcm/Makefile
@@ -25,6 +25,7 @@ snd-soc-raspidac3-objs := raspidac3.o
snd-soc-audioinjector-pi-soundcard-objs := audioinjector-pi-soundcard.o
snd-soc-digidac1-soundcard-objs := digidac1-soundcard.o
snd-soc-dionaudio-loco-objs := dionaudio_loco.o
+snd-soc-dionaudio-loco-v2-objs := dionaudio_loco-v2.o
snd-soc-allo-piano-dac-objs := allo-piano-dac.o
snd-soc-pisound-objs := pisound.o
@@ -44,5 +45,6 @@ obj-$(CONFIG_SND_BCM2708_SOC_RASPIDAC3)
obj-$(CONFIG_SND_AUDIOINJECTOR_PI_SOUNDCARD) += snd-soc-audioinjector-pi-soundcard.o
obj-$(CONFIG_SND_DIGIDAC1_SOUNDCARD) += snd-soc-digidac1-soundcard.o
obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO) += snd-soc-dionaudio-loco.o
+obj-$(CONFIG_SND_BCM2708_SOC_DIONAUDIO_LOCO_V2) += snd-soc-dionaudio-loco-v2.o
obj-$(CONFIG_SND_BCM2708_SOC_ALLO_PIANO_DAC) += snd-soc-allo-piano-dac.o
obj-$(CONFIG_SND_PISOUND) += snd-soc-pisound.o
--- /dev/null
+++ b/sound/soc/bcm/dionaudio_loco-v2.c
@@ -0,0 +1,140 @@
+/*
+ * ASoC Driver for Dion Audio LOCO-V2 DAC-AMP
+ *
+ * Author: Miquel Blauw <info@dionaudio.nl>
+ * Copyright 2017
+ *
+ * Based on the software of the RPi-DAC writen by Florian Meier
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include <sound/core.h>
+#include <sound/pcm.h>
+#include <sound/pcm_params.h>
+#include <sound/soc.h>
+#include <sound/jack.h>
+
+static bool digital_gain_0db_limit = true;
+
+static int snd_rpi_dionaudio_loco_v2_init(struct snd_soc_pcm_runtime *rtd)
+{
+ if (digital_gain_0db_limit) {
+ int ret;
+ struct snd_soc_card *card = rtd->card;
+
+ ret = snd_soc_limit_volume(card, "Digital Playback Volume", 207);
+ if (ret < 0)
+ dev_warn(card->dev, "Failed to set volume limit: %d\n", ret);
+ }
+
+ return 0;
+}
+
+static int snd_rpi_dionaudio_loco_v2_hw_params(
+ struct snd_pcm_substream *substream,
+ struct snd_pcm_hw_params *params)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+
+ unsigned int sample_bits =
+ snd_pcm_format_physical_width(params_format(params));
+
+ return snd_soc_dai_set_bclk_ratio(cpu_dai, sample_bits * 2);
+}
+
+/* machine stream operations */
+static struct snd_soc_ops snd_rpi_dionaudio_loco_v2_ops = {
+ .hw_params = snd_rpi_dionaudio_loco_v2_hw_params,
+};
+
+static struct snd_soc_dai_link snd_rpi_dionaudio_loco_v2_dai[] = {
+{
+ .name = "DionAudio LOCO-V2",
+ .stream_name = "DionAudio LOCO-V2 DAC-AMP",
+ .cpu_dai_name = "bcm2708-i2s.0",
+ .codec_dai_name = "pcm512x-hifi",
+ .platform_name = "bcm2708-i2s.0",
+ .codec_name = "pcm512x.1-004d",
+ .dai_fmt = SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
+ SND_SOC_DAIFMT_CBS_CFS,
+ .ops = &snd_rpi_dionaudio_loco_v2_ops,
+ .init = snd_rpi_dionaudio_loco_v2_init,
+},};
+
+/* audio machine driver */
+static struct snd_soc_card snd_rpi_dionaudio_loco_v2 = {
+ .name = "Dion Audio LOCO-V2",
+ .dai_link = snd_rpi_dionaudio_loco_v2_dai,
+ .num_links = ARRAY_SIZE(snd_rpi_dionaudio_loco_v2_dai),
+};
+
+static int snd_rpi_dionaudio_loco_v2_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+
+ snd_rpi_dionaudio_loco_v2.dev = &pdev->dev;
+
+ if (pdev->dev.of_node) {
+ struct device_node *i2s_node;
+ struct snd_soc_dai_link *dai =
+ &snd_rpi_dionaudio_loco_v2_dai[0];
+
+ i2s_node = of_parse_phandle(pdev->dev.of_node,
+ "i2s-controller", 0);
+ if (i2s_node) {
+ dai->cpu_dai_name = NULL;
+ dai->cpu_of_node = i2s_node;
+ dai->platform_name = NULL;
+ dai->platform_of_node = i2s_node;
+ }
+
+ digital_gain_0db_limit = !of_property_read_bool(
+ pdev->dev.of_node, "dionaudio,24db_digital_gain");
+ }
+
+ ret = snd_soc_register_card(&snd_rpi_dionaudio_loco_v2);
+ if (ret)
+ dev_err(&pdev->dev, "snd_soc_register_card() failed: %d\n",
+ ret);
+
+ return ret;
+}
+
+static int snd_rpi_dionaudio_loco_v2_remove(struct platform_device *pdev)
+{
+ return snd_soc_unregister_card(&snd_rpi_dionaudio_loco_v2);
+}
+
+static const struct of_device_id dionaudio_of_match[] = {
+ { .compatible = "dionaudio,dionaudio-loco-v2", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, dionaudio_of_match);
+
+static struct platform_driver snd_rpi_dionaudio_loco_v2_driver = {
+ .driver = {
+ .name = "snd-rpi-dionaudio-loco-v2",
+ .owner = THIS_MODULE,
+ .of_match_table = dionaudio_of_match,
+ },
+ .probe = snd_rpi_dionaudio_loco_v2_probe,
+ .remove = snd_rpi_dionaudio_loco_v2_remove,
+};
+
+module_platform_driver(snd_rpi_dionaudio_loco_v2_driver);
+
+MODULE_AUTHOR("Miquel Blauw <info@dionaudio.nl>");
+MODULE_DESCRIPTION("ASoC Driver for DionAudio LOCO-V2");
+MODULE_LICENSE("GPL v2");
Reference in a new issue View git blame Copy permalink