a02cb1f311
This is the same as the NAND board but gmac1 is wired to an external phy. Signed-off-by: John Crispin <john@phrozen.org>
50 lines
1.9 KiB
Makefile
50 lines
1.9 KiB
Makefile
# Copyright (c) 2014 The Linux Foundation. All rights reserved.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
define Image/BuilduImage
|
|
$(CP) $(KDIR)/zImage$(2) $(KDIR)/zImage-$(1)$(2)
|
|
cat $(LINUX_DIR)/arch/arm/boot/dts/mt7623-$1.dtb >> $(KDIR)/zImage-$(1)$(2)
|
|
mkimage -A arm -O linux -T kernel -C none -a 0x80008000 -e 0x80008000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' -d $(KDIR)/zImage-$(1)$(2) $(KDIR)/uImage-$(1)$(2)
|
|
endef
|
|
|
|
define Image/Build/SysupgradeCombined
|
|
$(call Image/BuilduImage,$1)
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
$(call Image/BuilduImage,$1,-initramfs)
|
|
$(CP) $(KDIR)/uImage-$(1)-initramfs $(BIN_DIR)/$(IMG_PREFIX)-uImage-$(1)-initramfs
|
|
endif
|
|
mkdir -p "$(KDIR_TMP)/sysupgrade-$(1)/"
|
|
echo "BOARD=$(1)" > "$(KDIR_TMP)/sysupgrade-$(1)/CONTROL"
|
|
$(CP) "$(KDIR)/root.$(2)" "$(KDIR_TMP)/sysupgrade-$(1)/root"
|
|
$(CP) "$(KDIR)/uImage-$(1)" "$(KDIR_TMP)/sysupgrade-$(1)/kernel"
|
|
(cd "$(KDIR_TMP)"; $(TAR) cvf \
|
|
"$(BIN_DIR)/$(IMG_PREFIX)-$(1)-sysupgrade.tar" sysupgrade-$(1) \
|
|
$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") \
|
|
)
|
|
endef
|
|
|
|
define Image/Build/squashfs
|
|
$(call prepare_generic_squashfs,$(KDIR)/root.squashfs)
|
|
$(CP) $(KDIR)/root.squashfs $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs
|
|
|
|
$(call Image/Build/SysupgradeCombined,eMMC,squashfs)
|
|
|
|
$(call Image/BuilduImage,NAND)
|
|
$(call Image/BuilduImage,NAND-ePHY)
|
|
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
|
|
$(call Image/BuilduImage,NAND,-initramfs)
|
|
$(call Image/BuilduImage,NAND-ePHY,-initramfs)
|
|
$(CP) $(KDIR)/uImage-NAND-initramfs $(BIN_DIR)/$(IMG_PREFIX)-uImage-NAND-initramfs
|
|
$(CP) $(KDIR)/uImage-NAND-ePHY-initramfs $(BIN_DIR)/$(IMG_PREFIX)-uImage-NAND-ePHY-initramfs
|
|
endif
|
|
$(call Image/Build/SysupgradeNAND,NAND,$(1),$(KDIR)/uImage-NAND)
|
|
$(call Image/Build/SysupgradeNAND,NAND-ePHY,$(1),$(KDIR)/uImage-NAND-ePHY)
|
|
endef
|
|
|
|
define Image/Build
|
|
$(call Image/Build/$(1),$(1))
|
|
endef
|
|
|
|
$(eval $(call BuildImage))
|