openwrtv3/target/linux/ar71xx/base-files/etc
Federico Cappon 9fec39a033 ar71xx: add support for TP-Link TL-WA855RE v1
TP-Link TL-WA855RE v1 is a wall-plug N300 Wi-Fi range extender,
based on Qualcomm/Atheros QCA9533 v2.

Short specification:

- 550/397/198 MHz (CPU/DDR/AHB)
- 1x 10/100 Mbps Ethernet
- 32 MB of RAM (DDR1)
- 4 MB of FLASH
- 2T2R 2.4 GHz
- 2x external antennas
- 2x LED (green and orange in the same package), 2x button
- UART: TP5(TX) and TP4(RX) test points on PCB

Flash instruction: use "factory" image directly in vendor GUI.

Warning: this device does not include any kind of recovery mechanism
in the bootloader and disassembling process is not trivial.

You can access vendor firmware over serial line using:
- login: root
- password: sohoadmin

Image was tested only in EU version of the device, but should work
also with the same device version sold in other countries.

Signed-off-by: Federico Cappon <dududede371@gmail.com>
2017-06-29 10:37:36 +02:00
..
board.d ar71xx: add support for TP-Link TL-WA855RE v1 2017-06-29 10:37:36 +02:00
hotplug.d ar71xx: add AVM FRITZ!WLAN Repeater 300E support 2017-06-24 22:36:38 +02:00
uci-defaults ar71xx: fix Wallys DR344 GPIO-connected LEDs and button 2017-05-30 14:34:04 +02:00
diag.sh ar71xx: add support for TP-Link TL-WA855RE v1 2017-06-29 10:37:36 +02:00
inittab image / basefiles: make console password configurable 2016-04-18 21:53:07 +02:00