openwrtv3/target/linux/ar71xx/patches-4.4/622-MIPS-ath79-add-more-register-defines-for-QCA956x-SoC.patch
Mathias Kresin 0605b15be4 ar71xx: add AR724x PCIe init fixes
Add upstream send AR724x PCIe patches to get the PCIe controller out of
reset during driver init.

The AVM Fritz 300E bootloader doesn't take care of releasing the
different PCIe controller related resets which causes an endless hang
as soon as either the PCIE Reset register (0x180f0018) or the PCI
Application Control register (0x180f0000) is read from.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-24 22:36:38 +02:00

38 lines
1.3 KiB
Diff

--- a/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
+++ b/arch/mips/include/asm/mach-ath79/ar71xx_regs.h
@@ -157,6 +157,10 @@
#define QCA956X_EHCI0_BASE 0x1b000000
#define QCA956X_EHCI1_BASE 0x1b400000
#define QCA956X_EHCI_SIZE 0x200
+#define QCA956X_GMAC_SGMII_BASE (AR71XX_APB_BASE + 0x00070000)
+#define QCA956X_GMAC_SGMII_SIZE 0x64
+#define QCA956X_PLL_BASE (AR71XX_APB_BASE + 0x00050000)
+#define QCA956X_PLL_SIZE 0x50
#define QCA956X_GMAC_BASE (AR71XX_APB_BASE + 0x00070000)
#define QCA956X_GMAC_SIZE 0x64
@@ -414,6 +418,7 @@
#define QCA956X_PLL_DDR_CONFIG_REG 0x08
#define QCA956X_PLL_DDR_CONFIG1_REG 0x0c
#define QCA956X_PLL_CLK_CTRL_REG 0x10
+#define QCA956X_PLL_ETH_XMII_CONTROL_REG 0x30
#define QCA956X_PLL_CPU_CONFIG_REFDIV_SHIFT 12
#define QCA956X_PLL_CPU_CONFIG_REFDIV_MASK 0x1f
@@ -1196,4 +1201,16 @@
#define QCA955X_ETH_CFG_TXE_DELAY_MASK 0x3
#define QCA955X_ETH_CFG_TXE_DELAY_SHIFT 20
+/*
+ * QCA956X GMAC Interface
+ */
+
+#define QCA956X_GMAC_REG_ETH_CFG 0x00
+
+#define QCA956X_ETH_CFG_SW_ONLY_MODE BIT(7)
+#define QCA956X_ETH_CFG_SW_PHY_SWAP BIT(8)
+#define QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP BIT(9)
+#define QCA956X_ETH_CFG_SW_APB_ACCESS BIT(10)
+#define QCA956X_ETH_CFG_SW_ACC_MSB_FIRST BIT(13)
+
#endif /* __ASM_MACH_AR71XX_REGS_H */