openwrtv3/target/linux/ramips/dts/WHR-600D.dts
Chuanhong Guo c9c4b2116c ramips: Use dts alias based status led
Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-07-16 15:12:18 +02:00

162 lines
2.6 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "buffalo,whr-600d", "ralink,mt7620a-soc";
model = "Buffalo WHR-600D";
aliases {
led-status = &led_power_green;
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "whr-600d:red:power";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
wifi {
label = "whr-600d:green:wifi";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
led_power_green: power2 {
label = "whr-600d:green:power";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
};
wifi2 {
label = "whr-600d:orange:wifi";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
internet {
label = "whr-600d:green:internet";
gpios = <&gpio2 17 GPIO_ACTIVE_LOW>;
};
router {
label = "whr-600d:green:router";
gpios = <&gpio2 18 GPIO_ACTIVE_LOW>;
};
router2 {
label = "whr-600d:orange:router";
gpios = <&gpio2 19 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
aoss {
label = "aoss";
gpios = <&gpio2 13 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
ap {
label = "ap";
gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
bridge {
label = "bridge";
gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
linux,input-type = <EV_SW>;
};
};
};
&gpio2 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
ralink,function = "gpio";
};
};
};
&ethernet {
pinctrl-names = "default";
pinctrl-0 = <&ephy_pins>;
mtd-mac-address = <&factory 0x4>;
mediatek,portmap = "llllw";
};
&gsw {
mediatek,port4 = "ephy";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&pcie {
status = "okay";
pcie-bridge {
wifi@1814,5592 {
compatible = "pci1814,5592";
reg = <0x0000 0 0 0 0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};
};