openwrtv3/target/linux/ramips/dts/V11STFE.dts
Chuanhong Guo c9c4b2116c ramips: Use dts alias based status led
Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-07-16 15:12:18 +02:00

90 lines
1.3 KiB
Text

/dts-v1/;
#include "rt2880.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,v11st-fe", "ralink,rt2880-soc";
model = "Ralink V11ST-FE";
aliases {
led-status = &led_status;
};
pci@440000 {
status = "okay";
host-bridge {
pci-bridge@1 {
status = "okay";
};
};
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x0030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x003b0000>;
label = "firmware";
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_status: status {
label = "v11st-fe:green:status";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
};
};
&gpio0 {
status = "okay";
};
&ethernet {
status = "okay";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};