openwrtv3/target/linux/ramips/dts/RE350.dts
Chuanhong Guo c9c4b2116c ramips: Use dts alias based status led
Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-07-16 15:12:18 +02:00

168 lines
2.7 KiB
Text

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "tplink,re350-v1", "mediatek,mt7621-soc";
model = "TP-LINK RE350 v1";
aliases {
led-status = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,57600";
};
gpio-leds {
compatible = "gpio-leds";
led_power: power {
label = "re350-v1:blue:power";
gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
};
wifi2g {
label = "re350-v1:blue:wifi2G";
gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
};
wifi5g {
label = "re350-v1:blue:wifi5G";
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
};
wps_r {
label = "re350-v1:red:wps";
gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
};
wps_b {
label = "re350-v1:blue:wps";
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
};
eth {
label = "re350-v1:green:eth_act";
gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
};
eth2 {
label = "re350-v1:green:eth_link";
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
led {
label = "led";
gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
reset {
label = "reset";
gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
power {
label = "power";
gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
};
wps {
label = "wps";
gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
};
&spi0 {
status = "okay";
w25q64@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x5e0000>;
};
config: partition@600000 {
label = "config";
reg = <0x600000 0x50000>;
read-only;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
read-only;
};
};
};
&pcie {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 0>;
mtd-mac-address = <&config 0x10008>;
mtd-mac-address-increment = <1>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
mtd-mac-address = <&config 0x10008>;
mtd-mac-address-increment = <2>;
};
};
};
&ethernet {
mtd-mac-address = <&config 0x10008>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "rgmii2", "wdt";
ralink,function = "gpio";
};
};
};