openwrtv3/target/linux/ramips/dts/MT7620a_MT7530.dts
Mathias Kresin 05b1fcc70b ramips: cleanup SPI flash device tree properties usage
Use only the jedec,spi-nor compatible string. Everything else either
never worked or is only support to keep compatibility.

Remove the linux,modalias property. It is obsolete since kernel 4.4.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-02 22:48:54 +01:00

116 lines
1.6 KiB
Text

/dts-v1/;
#include "mt7620a.dtsi"
/ {
compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
model = "Ralink MT7620a + MT7530 evaluation board";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
mediatek,portmap = "llllw";
port@5 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
};
phy1: ethernet-phy@1 {
reg = <1>;
phy-mode = "rgmii";
};
phy2: ethernet-phy@2 {
reg = <2>;
phy-mode = "rgmii";
};
phy3: ethernet-phy@3 {
reg = <3>;
phy-mode = "rgmii";
};
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
phy1f: ethernet-phy@1f {
reg = <0x1f>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4 = "gmac";
mediatek,mt7530 = <1>;
};
&pcie {
status = "okay";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};