openwrtv3/target/linux/ramips/dts/BR-6475ND.dts
Chuanhong Guo c9c4b2116c ramips: Use dts alias based status led
Also fix several typos in led node name.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
2018-07-16 15:12:18 +02:00

183 lines
2.9 KiB
Text

/dts-v1/;
#include "rt3883.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "edimax,br-6475nd", "ralink,rt3883-soc";
model = "Edimax BR-6475nD";
aliases {
led-status = &led_power;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
rfkill {
label = "rfkill";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,input-type = <EV_SW>;
linux,code = <KEY_RFKILL>;
};
};
gpio-leds {
compatible = "gpio-leds";
led_power: power {
label = "br-6475nd:green:power";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
wlan {
label = "br-6475nd:amber:wlan";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
wlan_5ghz {
label = "br-6475nd:amber:wlan_5ghz";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x00000000 0x00030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "nvram";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
devdata: partition@50000 {
reg = <0x00050000 0x00020000>;
label = "devdata";
read-only;
};
partition@70000 {
reg = <0x00070000 0x00790000>;
label = "firmware";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio0 5 GPIO_ACTIVE_HIGH>;
gpio-sck = <&gpio0 4 GPIO_ACTIVE_HIGH>;
realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
};
/* Unclear if this is the correct gpio setup; the USB ports are
unpopulated on a stock BR-6475nD, even though the hardware exists
and the headers are there. */
/*
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb {
gpio-export,name="usb";
gpio-export,output=<0>;
gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
};
};
*/
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
&timer {
status = "okay";
};
&gpio1 {
status = "okay";
};
&uartlite {
status = "okay";
};
&ethernet {
status = "okay";
mtd-mac-address = <&devdata 0x0d>;
port@0 {
mediatek,fixed-link = <1000 1 1 1>;
};
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&factory 0>;
};
&pci {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
wifi@0,0 {
compatible = "pci0,0";
reg = <0x10000 0 0 0 0>;
ralink,5ghz = <0>;
ralink,mtd-eeprom = <&factory 0x8000>;
};
};
};
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};