INAGAKI Hiroshi 9e6f22e309 ath79: add support for Buffalo WHR-G301N ... Buffalo WHR-G301N is a 2.4 GHz 11n router, based on Atheros AR7240. Ported from ar71xx target. Specification: - Atheros AR7240 - 32 MB of RAM - 4 MB of Flash - 2.4 GHz 2T2R wifi - 5x 10/100 Mbps Ethernet - 9x LEDs, 4x keys - LED: 8x gpio-leds, 1x ath9k-leds - key: 2x buttons, 1x slide switch - UART header on PCB - Vcc, GND, TX, RX from LEDs side - 115200n8 Flash instruction using factory image: 1. Connect the computer to the LAN port of WHR-G301N 2. Connect power cable to WHR-G301N and turn on it 3. Access to "http://192.168.11.1/" and open firmware update page ("ファーム更新") 4. Select the OpenWrt factory image and click execute ("実行") button 5. Wait ~150 seconds to complete flashing Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [fix the SUPPORTED_DEVICES to be compatible with the ar71xx image] Signed-off-by: Mathias Kresin <dev@kresin.me>		2018-08-16 21:20:57 +02:00
..
imagebuilder	imagebuilder: manifest function show stderr	2018-08-06 06:54:42 +02:00
linux	ath79: add support for Buffalo WHR-G301N	2018-08-16 21:20:57 +02:00
sdk	sdk: include arch/arm/ Linux includes along with arch/arm64/ ones	2018-08-03 13:47:29 +02:00
toolchain	merge: etc: update remaining files	2017-12-08 19:41:18 +01:00
Config.in	config: set ARCH if powerpc64 is selected in the configuration	2017-10-24 13:24:04 +02:00
Makefile	build: make <subdir>/install opt-in, use it for target/ only	2017-02-09 13:51:35 +01:00