dc7efaefb5
Hardware Highlights:
This patch adds support for Western Digital MyBook Live Series:
CPU: AMCC PowerPC UNKNOWN (PVR=12c41c83) at 800 MHz (PLB=200, OPB=100, EBC=100 MHz)
32 kB I-Cache 32 kB D-Cache, 256 kB L2-Cache, 32 kB OnChip Memory
Board: Apollo-3G - APM82181 Board, 1*SATA
DRAM: 256 MB (2x NT5TU64M16GG-AC)
FLASH: 512 kB (SST 39VF040)
Ethernet: 1xRGMII - 1 Gbit - Broadcom PHY BCM54610
WARNING: The serial port needs a TTL/RS-232 v3.3 level converter!
The MyBook Live Duo additionally features a 1x USB 2.0 host port
and can support a second hard-drive.
This target produces two images for a target.
1. ext4 image
The extracted/raw image can be directly installed on
the internal HDD via "dd if=img.ext4 of=/dev/sdX".
This can either be done in place with the stock MyBook Live
firmware via ssh. Or by removing the HDD and writing the image
with a different PC.
The the compressed images are useful for sysupgrade.
2. recovery.tar image for TFTP and Serial.
extract the recovery.tar to a TFTP server directory.
On the MyBook Live (Duo) serial port - Hit Enter during u-boot and insert:
# setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1; run net_self
Where 192.168.1.254 is your TFTP server.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
489 lines
11 KiB
Text
489 lines
11 KiB
Text
/*
|
|
* Copyright 2008 DENX Software Engineering, Stefan Roese <sr@denx.de>
|
|
* (c) Copyright 2010 Western Digital Technologies, Inc. All Rights Reserved.
|
|
*
|
|
* This file is licensed under the terms of the GNU General Public
|
|
* License version 2. This program is licensed "as is" without
|
|
* any warranty of any kind, whether express or implied.
|
|
*/
|
|
|
|
/ {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "amcc,apollo3g";
|
|
dcr-parent = <&{/cpus/cpu@0}>;
|
|
|
|
aliases {
|
|
ethernet0 = &EMAC0;
|
|
serial0 = &UART0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
cpu@0 {
|
|
device_type = "cpu";
|
|
model = "PowerPC,apm82181";
|
|
reg = <0x00000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
timebase-frequency = <0>; /* Filled in by U-Boot */
|
|
i-cache-line-size = <32>;
|
|
d-cache-line-size = <32>;
|
|
i-cache-size = <32768>;
|
|
d-cache-size = <32768>;
|
|
dcr-controller;
|
|
dcr-access-method = "native";
|
|
next-level-cache = <&L2C0>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x00000000 0x00000000>; /* Filled in by U-Boot */
|
|
};
|
|
|
|
UIC0: interrupt-controller0 {
|
|
compatible = "ibm,uic-460ex","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <0>;
|
|
dcr-reg = <0x0c0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
};
|
|
|
|
UIC1: interrupt-controller1 {
|
|
compatible = "ibm,uic-460ex","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <1>;
|
|
dcr-reg = <0x0d0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x1e 0x4 0x1f 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC2: interrupt-controller2 {
|
|
compatible = "ibm,uic-460ex","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <2>;
|
|
dcr-reg = <0x0e0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0xa 0x4 0xb 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
UIC3: interrupt-controller3 {
|
|
compatible = "ibm,uic-460ex","ibm,uic";
|
|
interrupt-controller;
|
|
cell-index = <3>;
|
|
dcr-reg = <0x0f0 0x009>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
interrupts = <0x10 0x4 0x11 0x4>; /* cascade */
|
|
interrupt-parent = <&UIC0>;
|
|
};
|
|
|
|
OCM1: ocm@400040000 {
|
|
compatible = "ibm,ocm";
|
|
status = "okay";
|
|
cell-index = <1>;
|
|
/* configured in U-Boot */
|
|
reg = <4 0x00040000 0x8000>; /* 32K */
|
|
};
|
|
|
|
SDR0: sdr {
|
|
compatible = "ibm,sdr-460ex";
|
|
dcr-reg = <0x00e 0x002>;
|
|
};
|
|
|
|
CPR0: cpr {
|
|
compatible = "ibm,cpr-460ex";
|
|
dcr-reg = <0x00c 0x002>;
|
|
};
|
|
|
|
CPM0: cpm {
|
|
compatible = "ibm,cpm";
|
|
dcr-access-method = "native";
|
|
dcr-reg = <0x160 0x003>;
|
|
unused-units = <0x00000100>;
|
|
idle-doze = <0x02000000>;
|
|
standby = <0xfeff791d>;
|
|
};
|
|
|
|
L2C0: l2c {
|
|
compatible = "ibm,l2-cache-apm82181", "ibm,l2-cache";
|
|
dcr-reg = <0x020 0x008
|
|
0x030 0x008>;
|
|
cache-line-size = <32>;
|
|
cache-size = <262144>;
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <11 1>;
|
|
};
|
|
|
|
plb {
|
|
compatible = "ibm,plb-460ex", "ibm,plb4";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
ranges;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
SDRAM0: sdram {
|
|
compatible = "ibm,sdram-460ex", "ibm,sdram-405gp";
|
|
dcr-reg = <0x010 0x002>;
|
|
};
|
|
|
|
CRYPTO: crypto@180000 {
|
|
compatible = "amcc,ppc460ex-crypto", "amcc,ppc4xx-crypto";
|
|
reg = <4 0x00180000 0x80400>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x1d 0x4>;
|
|
};
|
|
|
|
PKA: pka@114000 {
|
|
device_type = "pka";
|
|
compatible = "ppc4xx-pka", "amcc,ppc4xx-pka";
|
|
reg = <0 0x00114000 0x4000>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0x14 0x2>;
|
|
};
|
|
|
|
HWRNG: trng@110000 {
|
|
compatible = "amcc,ppc460ex-rng", "ppc4xx-rng";
|
|
reg = <4 0x00110000 0x50>;
|
|
};
|
|
|
|
MAL0: mcmal {
|
|
compatible = "ibm,mcmal-460ex", "ibm,mcmal2";
|
|
descriptor-memory = "ocm";
|
|
dcr-reg = <0x180 0x062>;
|
|
num-tx-chans = <1>;
|
|
num-rx-chans = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-parent = <&UIC2>;
|
|
interrupts = < /*TXEOB*/ 0x6 0x4
|
|
/*RXEOB*/ 0x7 0x4
|
|
/*SERR*/ 0x3 0x4
|
|
/*TXDE*/ 0x4 0x4
|
|
/*RXDE*/ 0x5 0x4
|
|
/*TX0 COAL*/ 0x8 0x2
|
|
/*TX1 COAL 0x9 0x2*/
|
|
/*RX0 COAL*/ 0xc 0x2
|
|
/*RX1 COAL 0xd 0x2*/ >;
|
|
};
|
|
|
|
AHBDMA: dma@bffd0800 {
|
|
compatible = "snps,dma-spear1340";
|
|
reg = <4 0xbffd0800 0x400>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <25 4>;
|
|
#dma-cells = <3>;
|
|
/* use autoconfiguration for the dma setup */
|
|
};
|
|
|
|
SATA0: sata@bffd1000 {
|
|
compatible = "amcc,sata-460ex";
|
|
reg = <4 0xbffd1000 0x800>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <26 4>;
|
|
dmas = <&AHBDMA 0 0 1>;
|
|
dma-names = "sata-dma";
|
|
};
|
|
|
|
SATA1: sata@bffd1800 {
|
|
compatible = "amcc,sata-460ex";
|
|
reg = <4 0xbffd1800 0x800>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <27 4>;
|
|
dmas = <&AHBDMA 1 0 2>;
|
|
dma-names = "sata-dma";
|
|
};
|
|
|
|
|
|
USBOTG0: usbotg@bff80000 {
|
|
compatible = "snps,dwc2";
|
|
reg = <4 0xbff80000 0x10000>;
|
|
interrupt-parent = <&USBOTG0>;
|
|
interrupts = <0 1 2>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = </* USB-OTG */ 0 &UIC2 0x1c 4
|
|
/* HIGH-POWER */ 1 &UIC1 0x1a 8
|
|
/* DMA */ 2 &UIC0 0xc 4>;
|
|
dr_mode = "host";
|
|
};
|
|
|
|
POB0: opb {
|
|
compatible = "ibm,opb-460ex", "ibm,opb";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
ranges = <0xb0000000 0x4 0xb0000000 0x50000000>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
|
|
EBC0: ebc {
|
|
compatible = "ibm,ebc-460ex", "ibm,ebc";
|
|
dcr-reg = <0x012 0x002>;
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
interrupts = <0x6 0x4>;
|
|
interrupt-parent = <&UIC1>;
|
|
/* ranges property are supplied by U-Boot */
|
|
ranges = <0x0 0x0 0xfff80000 0x00080000
|
|
0x1 0x0 0x00000000 0x00000000
|
|
0x2 0x0 0x00000000 0x00000000>;
|
|
|
|
/* Define device tree for Apollo3g NAS NOR flash
|
|
* The NOR doesn't work when "enable-button" GPIO
|
|
* is asserted.
|
|
*/
|
|
nor_flash@0,0 {
|
|
compatible = "amd,s29gl512n", "jedec-probe", "cfi-flash", "mtd-rom";
|
|
bank-width = <1>;
|
|
reg = <0x00000000 0x00000000 0x00080000>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
partition@0 {
|
|
/* Part of bootrom - Don't use it without a jump */
|
|
label = "free";
|
|
reg = <0x00000000 0x0001e000>;
|
|
};
|
|
partition@1 {
|
|
label = "env";
|
|
reg = <0x0001e000 0x00002000>;
|
|
};
|
|
partition@2 {
|
|
label = "uboot";
|
|
reg = <0x00020000 0x00050000>;
|
|
};
|
|
|
|
};
|
|
|
|
ndfc@1,0 {
|
|
compatible = "ibm,ndfc";
|
|
reg = <0x00000001 0x00000000 0x00002000>;
|
|
ccr = <0x00001000>;
|
|
bank-settings = <0x80002222>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
status = "disabled";
|
|
|
|
nand {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
|
|
gpio0: gpio0@e0000000 {
|
|
compatible = "wd,mbl-gpio", "ti,74273";
|
|
reg-names = "dat";
|
|
reg = <0xe0000000 0x1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
|
|
enable-phy {
|
|
/* toggle to reset EMAC PHY */
|
|
gpio-hog;
|
|
line-name = "enable EMAC PHY";
|
|
gpios = <0 1>;
|
|
output-low;
|
|
};
|
|
|
|
enable-button {
|
|
/* Defined in u-boot as: NOT_NOR
|
|
* "enables features other than NOR
|
|
* specifically, the buffer at CS2"
|
|
* (button).
|
|
*
|
|
* Note: This option is disabled as
|
|
* it prevents the system from being
|
|
* rebooted successfully.
|
|
*/
|
|
|
|
gpio-hog;
|
|
line-name = "Enable Reset Button, disable NOR";
|
|
gpios = <1 0>;
|
|
output-low;
|
|
};
|
|
|
|
enable-usb {
|
|
gpio-hog;
|
|
line-name = "Power USB Core";
|
|
gpios = <2 1>;
|
|
output-low;
|
|
};
|
|
|
|
enable-port1 {
|
|
gpio-hog;
|
|
line-name = "Power Drive Port 1";
|
|
gpios = <3 1>;
|
|
output-low;
|
|
};
|
|
|
|
enable-port0 {
|
|
gpio-hog;
|
|
line-name = "Power Drive Port 0";
|
|
gpios = <7 1>;
|
|
output-low;
|
|
};
|
|
};
|
|
|
|
gpio1: gpio1@e0100000 {
|
|
compatible = "wd,mbl-gpio", "ti,74244";
|
|
reg-names = "dat";
|
|
reg = <0xe0100000 0x1>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
no-output;
|
|
};
|
|
|
|
UART0: serial@ef600300 {
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0xef600300 0x00000008>;
|
|
virtual-reg = <0xef600300>;
|
|
clock-frequency = <0>; /* Filled in by U-Boot */
|
|
current-speed = <0>; /* Filled in by U-Boot */
|
|
interrupt-parent = <&UIC1>;
|
|
interrupts = <0x1 0x4>;
|
|
};
|
|
|
|
gpio-leds {
|
|
compatible = "gpio-leds";
|
|
power-red {
|
|
label = "mbl:red:power";
|
|
gpios = <&gpio0 4 0>;
|
|
linux,default-trigger = "panic";
|
|
};
|
|
power-green {
|
|
label = "mbl:green:power";
|
|
gpios = <&gpio0 5 0>;
|
|
linux,default-trigger = "default-on";
|
|
};
|
|
power-blue {
|
|
label = "mbl:blue:power";
|
|
gpios = <&gpio0 6 0>;
|
|
linux,default-trigger = "cpu0";
|
|
};
|
|
};
|
|
|
|
gpio_keys_polled {
|
|
compatible = "gpio-keys-polled";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
poll-interval = <60>; /* 3 * 20 = 60ms */
|
|
autorepeat;
|
|
button@1 {
|
|
label = "Reset button";
|
|
linux,code = <0x198>; /* KEY_RESTART */
|
|
gpios = <&gpio1 2 1>;
|
|
};
|
|
};
|
|
|
|
RGMII0: emac-rgmii@ef601500 {
|
|
compatible = "ibm,rgmii-405ex", "ibm,rgmii";
|
|
reg = <0xef601500 0x00000008>;
|
|
has-mdio;
|
|
};
|
|
|
|
TAH0: emac-tah@ef601350 {
|
|
compatible = "ibm,tah-460ex", "ibm,tah";
|
|
reg = <0xef601350 0x00000030>;
|
|
};
|
|
|
|
EMAC0: ethernet@ef600c00 {
|
|
device_type = "network";
|
|
compatible = "ibm,emac-405ex", "ibm,emac4sync";
|
|
interrupt-parent = <&EMAC0>;
|
|
interrupts = <0x0 0x1>;
|
|
#interrupt-cells = <1>;
|
|
#address-cells = <0>;
|
|
#size-cells = <0>;
|
|
interrupt-map = </*Status*/ 0x0 &UIC2 0x10 0x4
|
|
/*Wake*/ 0x1 &UIC2 0x14 0x4>;
|
|
reg = <0xef600c00 0x000000c4>;
|
|
local-mac-address = [000000000000]; /* Filled in by U-Boot */
|
|
mal-device = <&MAL0>;
|
|
mal-tx-channel = <0>;
|
|
mal-rx-channel = <0>;
|
|
cell-index = <0>;
|
|
max-frame-size = <9000>;
|
|
rx-fifo-size = <16384>;
|
|
tx-fifo-size = <2048>;
|
|
phy-mode = "rgmii";
|
|
phy-map = <0x00000000>;
|
|
rgmii-device = <&RGMII0>;
|
|
rgmii-channel = <0>;
|
|
tah-device = <&TAH0>;
|
|
tah-channel = <0>;
|
|
has-inverted-stacr-oc;
|
|
has-new-stacr-staopc;
|
|
};
|
|
};
|
|
|
|
ADMA: adma {
|
|
compatible = "amcc,apm82181-adma";
|
|
device_type = "dma";
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
|
|
dma-4channel@1 {
|
|
compatible = "amcc,apm82181-dma-4channel";
|
|
cell-index = <1>;
|
|
label = "plb_dma1";
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0xd 0x4>;
|
|
pool_size = <0x4000>;
|
|
dcr-reg = <0x208 0x20f>;
|
|
};
|
|
|
|
dma-4channel@2 {
|
|
compatible = "amcc,apm82181-dma-4channel";
|
|
cell-index = <2>;
|
|
label = "plb_dma2";
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0xe 0x4>;
|
|
pool_size = <0x4000>;
|
|
dcr-reg = <0x210 0x217>;
|
|
};
|
|
|
|
dma-4channel@3 {
|
|
compatible = "amcc,apm82181-dma-4channel";
|
|
cell-index = <3>;
|
|
label = "plb_dma3";
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0xf 0x4>;
|
|
pool_size = <0x4000>;
|
|
dcr-reg = <0x218 0x21f>;
|
|
};
|
|
};
|
|
|
|
DMA: plb_dma@400300200 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "amcc,dma";
|
|
cell-index = <0>;
|
|
reg = <4 00300200 200>;
|
|
dcr-reg = <0x100 0x13f>;
|
|
interrupt-parent = <&UIC0>;
|
|
interrupts = <0>;
|
|
interrupt-map = < /* chan0 */ 0 &UIC0 12 4>;
|
|
|
|
dma-4channel@0{
|
|
compatible = "amcc,dma-4channel";
|
|
cell-index = <0>;
|
|
label = "channel0";
|
|
reg = <0x100 0x107>;
|
|
};
|
|
};
|
|
};
|
|
};
|