openwrtv3/target/linux/generic/files/drivers/net/phy/ar8327.c

/*
 * ar8327.c: AR8216 switch driver
 *
 * Copyright (C) 2009 Felix Fietkau <nbd@openwrt.org>
 * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org>
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <linux/list.h>
#include <linux/bitops.h>
#include <linux/switch.h>
#include <linux/delay.h>
#include <linux/phy.h>
#include <linux/lockdep.h>
#include <linux/ar8216_platform.h>
#include <linux/workqueue.h>
#include <linux/of_device.h>
#include <linux/leds.h>

#include "ar8216.h"
#include "ar8327.h"

extern const struct ar8xxx_mib_desc ar8236_mibs[39];
extern struct switch_attr ar8xxx_sw_attr_port[2];
extern struct switch_attr ar8xxx_sw_attr_vlan[1];

static u32
ar8327_get_pad_cfg(struct ar8327_pad_cfg *cfg)
{
	u32 t;

	if (!cfg)
		return 0;

	t = 0;
	switch (cfg->mode) {
	case AR8327_PAD_NC:
		break;

	case AR8327_PAD_MAC2MAC_MII:
		t = AR8327_PAD_MAC_MII_EN;
		if (cfg->rxclk_sel)
			t |= AR8327_PAD_MAC_MII_RXCLK_SEL;
		if (cfg->txclk_sel)
			t |= AR8327_PAD_MAC_MII_TXCLK_SEL;
		break;

	case AR8327_PAD_MAC2MAC_GMII:
		t = AR8327_PAD_MAC_GMII_EN;
		if (cfg->rxclk_sel)
			t |= AR8327_PAD_MAC_GMII_RXCLK_SEL;
		if (cfg->txclk_sel)
			t |= AR8327_PAD_MAC_GMII_TXCLK_SEL;
		break;

	case AR8327_PAD_MAC_SGMII:
		t = AR8327_PAD_SGMII_EN;

		/*
		 * WAR for the QUalcomm Atheros AP136 board.
		 * It seems that RGMII TX/RX delay settings needs to be
		 * applied for SGMII mode as well, The ethernet is not
		 * reliable without this.
		 */
		t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
		t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
		if (cfg->rxclk_delay_en)
			t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
		if (cfg->txclk_delay_en)
			t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;

		if (cfg->sgmii_delay_en)
			t |= AR8327_PAD_SGMII_DELAY_EN;

		break;

	case AR8327_PAD_MAC2PHY_MII:
		t = AR8327_PAD_PHY_MII_EN;
		if (cfg->rxclk_sel)
			t |= AR8327_PAD_PHY_MII_RXCLK_SEL;
		if (cfg->txclk_sel)
			t |= AR8327_PAD_PHY_MII_TXCLK_SEL;
		break;

	case AR8327_PAD_MAC2PHY_GMII:
		t = AR8327_PAD_PHY_GMII_EN;
		if (cfg->pipe_rxclk_sel)
			t |= AR8327_PAD_PHY_GMII_PIPE_RXCLK_SEL;
		if (cfg->rxclk_sel)
			t |= AR8327_PAD_PHY_GMII_RXCLK_SEL;
		if (cfg->txclk_sel)
			t |= AR8327_PAD_PHY_GMII_TXCLK_SEL;
		break;

	case AR8327_PAD_MAC_RGMII:
		t = AR8327_PAD_RGMII_EN;
		t |= cfg->txclk_delay_sel << AR8327_PAD_RGMII_TXCLK_DELAY_SEL_S;
		t |= cfg->rxclk_delay_sel << AR8327_PAD_RGMII_RXCLK_DELAY_SEL_S;
		if (cfg->rxclk_delay_en)
			t |= AR8327_PAD_RGMII_RXCLK_DELAY_EN;
		if (cfg->txclk_delay_en)
			t |= AR8327_PAD_RGMII_TXCLK_DELAY_EN;
		break;

	case AR8327_PAD_PHY_GMII:
		t = AR8327_PAD_PHYX_GMII_EN;
		break;

	case AR8327_PAD_PHY_RGMII:
		t = AR8327_PAD_PHYX_RGMII_EN;
		break;

	case AR8327_PAD_PHY_MII:
		t = AR8327_PAD_PHYX_MII_EN;
		break;
	}

	return t;
}

static void
ar8327_phy_fixup(struct ar8xxx_priv *priv, int phy)
{
	switch (priv->chip_rev) {
	case 1:
		/* For 100M waveform */
		ar8xxx_phy_dbg_write(priv, phy, 0, 0x02ea);
		/* Turn on Gigabit clock */
		ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x68a0);
		break;

	case 2:
		ar8xxx_phy_mmd_write(priv, phy, 0x7, 0x3c);
		ar8xxx_phy_mmd_write(priv, phy, 0x4007, 0x0);
		/* fallthrough */
	case 4:
		ar8xxx_phy_mmd_write(priv, phy, 0x3, 0x800d);
		ar8xxx_phy_mmd_write(priv, phy, 0x4003, 0x803f);

		ar8xxx_phy_dbg_write(priv, phy, 0x3d, 0x6860);
		ar8xxx_phy_dbg_write(priv, phy, 0x5, 0x2c46);
		ar8xxx_phy_dbg_write(priv, phy, 0x3c, 0x6000);
		break;
	}
}

static u32
ar8327_get_port_init_status(struct ar8327_port_cfg *cfg)
{
	u32 t;

	if (!cfg->force_link)
		return AR8216_PORT_STATUS_LINK_AUTO;

	t = AR8216_PORT_STATUS_TXMAC | AR8216_PORT_STATUS_RXMAC;
	t |= cfg->duplex ? AR8216_PORT_STATUS_DUPLEX : 0;
	t |= cfg->rxpause ? AR8216_PORT_STATUS_RXFLOW : 0;
	t |= cfg->txpause ? AR8216_PORT_STATUS_TXFLOW : 0;

	switch (cfg->speed) {
	case AR8327_PORT_SPEED_10:
		t |= AR8216_PORT_SPEED_10M;
		break;
	case AR8327_PORT_SPEED_100:
		t |= AR8216_PORT_SPEED_100M;
		break;
	case AR8327_PORT_SPEED_1000:
		t |= AR8216_PORT_SPEED_1000M;
		break;
	}

	return t;
}

#define AR8327_LED_ENTRY(_num, _reg, _shift) \
	[_num] = { .reg = (_reg), .shift = (_shift) }

static const struct ar8327_led_entry
ar8327_led_map[AR8327_NUM_LEDS] = {
	AR8327_LED_ENTRY(AR8327_LED_PHY0_0, 0, 14),
	AR8327_LED_ENTRY(AR8327_LED_PHY0_1, 1, 14),
	AR8327_LED_ENTRY(AR8327_LED_PHY0_2, 2, 14),

	AR8327_LED_ENTRY(AR8327_LED_PHY1_0, 3, 8),
	AR8327_LED_ENTRY(AR8327_LED_PHY1_1, 3, 10),
	AR8327_LED_ENTRY(AR8327_LED_PHY1_2, 3, 12),

	AR8327_LED_ENTRY(AR8327_LED_PHY2_0, 3, 14),
	AR8327_LED_ENTRY(AR8327_LED_PHY2_1, 3, 16),
	AR8327_LED_ENTRY(AR8327_LED_PHY2_2, 3, 18),

	AR8327_LED_ENTRY(AR8327_LED_PHY3_0, 3, 20),
	AR8327_LED_ENTRY(AR8327_LED_PHY3_1, 3, 22),
	AR8327_LED_ENTRY(AR8327_LED_PHY3_2, 3, 24),

	AR8327_LED_ENTRY(AR8327_LED_PHY4_0, 0, 30),
	AR8327_LED_ENTRY(AR8327_LED_PHY4_1, 1, 30),
	AR8327_LED_ENTRY(AR8327_LED_PHY4_2, 2, 30),
};

static void
ar8327_set_led_pattern(struct ar8xxx_priv *priv, unsigned int led_num,
		       enum ar8327_led_pattern pattern)
{
	const struct ar8327_led_entry *entry;

	entry = &ar8327_led_map[led_num];
	ar8xxx_rmw(priv, AR8327_REG_LED_CTRL(entry->reg),
		   (3 << entry->shift), pattern << entry->shift);
}

static void
ar8327_led_work_func(struct work_struct *work)
{
	struct ar8327_led *aled;
	u8 pattern;

	aled = container_of(work, struct ar8327_led, led_work);

	spin_lock(&aled->lock);
	pattern = aled->pattern;
	spin_unlock(&aled->lock);

	ar8327_set_led_pattern(aled->sw_priv, aled->led_num,
			       pattern);
}

static void
ar8327_led_schedule_change(struct ar8327_led *aled, u8 pattern)
{
	if (aled->pattern == pattern)
		return;

	aled->pattern = pattern;
	schedule_work(&aled->led_work);
}

static inline struct ar8327_led *
led_cdev_to_ar8327_led(struct led_classdev *led_cdev)
{
	return container_of(led_cdev, struct ar8327_led, cdev);
}

static int
ar8327_led_blink_set(struct led_classdev *led_cdev,
		     unsigned long *delay_on,
		     unsigned long *delay_off)
{
	struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);

	if (*delay_on == 0 && *delay_off == 0) {
		*delay_on = 125;
		*delay_off = 125;
	}

	if (*delay_on != 125 || *delay_off != 125) {
		/*
		 * The hardware only supports blinking at 4Hz. Fall back
		 * to software implementation in other cases.
		 */
		return -EINVAL;
	}

	spin_lock(&aled->lock);

	aled->enable_hw_mode = false;
	ar8327_led_schedule_change(aled, AR8327_LED_PATTERN_BLINK);

	spin_unlock(&aled->lock);

	return 0;
}

static void
ar8327_led_set_brightness(struct led_classdev *led_cdev,
			  enum led_brightness brightness)
{
	struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
	u8 pattern;
	bool active;

	active = (brightness != LED_OFF);
	active ^= aled->active_low;

	pattern = (active) ? AR8327_LED_PATTERN_ON :
			     AR8327_LED_PATTERN_OFF;

	spin_lock(&aled->lock);

	aled->enable_hw_mode = false;
	ar8327_led_schedule_change(aled, pattern);

	spin_unlock(&aled->lock);
}

static ssize_t
ar8327_led_enable_hw_mode_show(struct device *dev,
			       struct device_attribute *attr,
			       char *buf)
{
	struct led_classdev *led_cdev = dev_get_drvdata(dev);
	struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
	ssize_t ret = 0;

	spin_lock(&aled->lock);
	ret += sprintf(buf, "%d\n", aled->enable_hw_mode);
	spin_unlock(&aled->lock);

	return ret;
}

static ssize_t
ar8327_led_enable_hw_mode_store(struct device *dev,
				struct device_attribute *attr,
				const char *buf,
				size_t size)
{
        struct led_classdev *led_cdev = dev_get_drvdata(dev);
	struct ar8327_led *aled = led_cdev_to_ar8327_led(led_cdev);
	u8 pattern;
	u8 value;
	int ret;

	ret = kstrtou8(buf, 10, &value);
	if (ret < 0)
		return -EINVAL;

	spin_lock(&aled->lock);

	aled->enable_hw_mode = !!value;
	if (aled->enable_hw_mode)
		pattern = AR8327_LED_PATTERN_RULE;
	else
		pattern = AR8327_LED_PATTERN_OFF;

	ar8327_led_schedule_change(aled, pattern);

	spin_unlock(&aled->lock);

	return size;
}

static DEVICE_ATTR(enable_hw_mode,  S_IRUGO | S_IWUSR,
		   ar8327_led_enable_hw_mode_show,
		   ar8327_led_enable_hw_mode_store);

static int
ar8327_led_register(struct ar8327_led *aled)
{
	int ret;

	ret = led_classdev_register(NULL, &aled->cdev);
	if (ret < 0)
		return ret;

	if (aled->mode == AR8327_LED_MODE_HW) {
		ret = device_create_file(aled->cdev.dev,
					 &dev_attr_enable_hw_mode);
		if (ret)
			goto err_unregister;
	}

	return 0;

err_unregister:
	led_classdev_unregister(&aled->cdev);
	return ret;
}

static void
ar8327_led_unregister(struct ar8327_led *aled)
{
	if (aled->mode == AR8327_LED_MODE_HW)
		device_remove_file(aled->cdev.dev, &dev_attr_enable_hw_mode);

	led_classdev_unregister(&aled->cdev);
	cancel_work_sync(&aled->led_work);
}

static int
ar8327_led_create(struct ar8xxx_priv *priv,
		  const struct ar8327_led_info *led_info)
{
	struct ar8327_data *data = priv->chip_data;
	struct ar8327_led *aled;
	int ret;

	if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
		return 0;

	if (!led_info->name)
		return -EINVAL;

	if (led_info->led_num >= AR8327_NUM_LEDS)
		return -EINVAL;

	aled = kzalloc(sizeof(*aled) + strlen(led_info->name) + 1,
		       GFP_KERNEL);
	if (!aled)
		return -ENOMEM;

	aled->sw_priv = priv;
	aled->led_num = led_info->led_num;
	aled->active_low = led_info->active_low;
	aled->mode = led_info->mode;

	if (aled->mode == AR8327_LED_MODE_HW)
		aled->enable_hw_mode = true;

	aled->name = (char *)(aled + 1);
	strcpy(aled->name, led_info->name);

	aled->cdev.name = aled->name;
	aled->cdev.brightness_set = ar8327_led_set_brightness;
	aled->cdev.blink_set = ar8327_led_blink_set;
	aled->cdev.default_trigger = led_info->default_trigger;

	spin_lock_init(&aled->lock);
	mutex_init(&aled->mutex);
	INIT_WORK(&aled->led_work, ar8327_led_work_func);

	ret = ar8327_led_register(aled);
	if (ret)
		goto err_free;

	data->leds[data->num_leds++] = aled;

	return 0;

err_free:
	kfree(aled);
	return ret;
}

static void
ar8327_led_destroy(struct ar8327_led *aled)
{
	ar8327_led_unregister(aled);
	kfree(aled);
}

static void
ar8327_leds_init(struct ar8xxx_priv *priv)
{
	struct ar8327_data *data = priv->chip_data;
	unsigned i;

	if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
		return;

	for (i = 0; i < data->num_leds; i++) {
		struct ar8327_led *aled;

		aled = data->leds[i];

		if (aled->enable_hw_mode)
			aled->pattern = AR8327_LED_PATTERN_RULE;
		else
			aled->pattern = AR8327_LED_PATTERN_OFF;

		ar8327_set_led_pattern(priv, aled->led_num, aled->pattern);
	}
}

static void
ar8327_leds_cleanup(struct ar8xxx_priv *priv)
{
	struct ar8327_data *data = priv->chip_data;
	unsigned i;

	if (!IS_ENABLED(CONFIG_AR8216_PHY_LEDS))
		return;

	for (i = 0; i < data->num_leds; i++) {
		struct ar8327_led *aled;

		aled = data->leds[i];
		ar8327_led_destroy(aled);
	}

	kfree(data->leds);
}

static int
ar8327_hw_config_pdata(struct ar8xxx_priv *priv,
		       struct ar8327_platform_data *pdata)
{
	struct ar8327_led_cfg *led_cfg;
	struct ar8327_data *data = priv->chip_data;
	u32 pos, new_pos;
	u32 t;

	if (!pdata)
		return -EINVAL;

	priv->get_port_link = pdata->get_port_link;

	data->port0_status = ar8327_get_port_init_status(&pdata->port0_cfg);
	data->port6_status = ar8327_get_port_init_status(&pdata->port6_cfg);

	t = ar8327_get_pad_cfg(pdata->pad0_cfg);
	if (chip_is_ar8337(priv))
		t |= AR8337_PAD_MAC06_EXCHANGE_EN;

	ar8xxx_write(priv, AR8327_REG_PAD0_MODE, t);
	t = ar8327_get_pad_cfg(pdata->pad5_cfg);
	ar8xxx_write(priv, AR8327_REG_PAD5_MODE, t);
	t = ar8327_get_pad_cfg(pdata->pad6_cfg);
	ar8xxx_write(priv, AR8327_REG_PAD6_MODE, t);

	pos = ar8xxx_read(priv, AR8327_REG_POWER_ON_STRIP);
	new_pos = pos;

	led_cfg = pdata->led_cfg;
	if (led_cfg) {
		if (led_cfg->open_drain)
			new_pos |= AR8327_POWER_ON_STRIP_LED_OPEN_EN;
		else
			new_pos &= ~AR8327_POWER_ON_STRIP_LED_OPEN_EN;

		ar8xxx_write(priv, AR8327_REG_LED_CTRL0, led_cfg->led_ctrl0);
		ar8xxx_write(priv, AR8327_REG_LED_CTRL1, led_cfg->led_ctrl1);
		ar8xxx_write(priv, AR8327_REG_LED_CTRL2, led_cfg->led_ctrl2);
		ar8xxx_write(priv, AR8327_REG_LED_CTRL3, led_cfg->led_ctrl3);

		if (new_pos != pos)
			new_pos |= AR8327_POWER_ON_STRIP_POWER_ON_SEL;
	}

	if (pdata->sgmii_cfg) {
		t = pdata->sgmii_cfg->sgmii_ctrl;
		if (priv->chip_rev == 1)
			t |= AR8327_SGMII_CTRL_EN_PLL |
			     AR8327_SGMII_CTRL_EN_RX |
			     AR8327_SGMII_CTRL_EN_TX;
		else
			t &= ~(AR8327_SGMII_CTRL_EN_PLL |
			       AR8327_SGMII_CTRL_EN_RX |
			       AR8327_SGMII_CTRL_EN_TX);

		ar8xxx_write(priv, AR8327_REG_SGMII_CTRL, t);

		if (pdata->sgmii_cfg->serdes_aen)
			new_pos &= ~AR8327_POWER_ON_STRIP_SERDES_AEN;
		else
			new_pos |= AR8327_POWER_ON_STRIP_SERDES_AEN;
	}

	ar8xxx_write(priv, AR8327_REG_POWER_ON_STRIP, new_pos);

	if (pdata->leds && pdata->num_leds) {
		int i;

		data->leds = kzalloc(pdata->num_leds * sizeof(void *),
				     GFP_KERNEL);
		if (!data->leds)
			return -ENOMEM;

		for (i = 0; i < pdata->num_leds; i++)
			ar8327_led_create(priv, &pdata->leds[i]);
	}

	return 0;
}

#ifdef CONFIG_OF
static int
ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
{
	struct ar8327_data *data = priv->chip_data;
	const __be32 *paddr;
	int len;
	int i;

	paddr = of_get_property(np, "qca,ar8327-initvals", &len);
	if (!paddr || len < (2 * sizeof(*paddr)))
		return -EINVAL;

	len /= sizeof(*paddr);

	for (i = 0; i < len - 1; i += 2) {
		u32 reg;
		u32 val;

		reg = be32_to_cpup(paddr + i);
		val = be32_to_cpup(paddr + i + 1);

		switch (reg) {
		case AR8327_REG_PORT_STATUS(0):
			data->port0_status = val;
			break;
		case AR8327_REG_PORT_STATUS(6):
			data->port6_status = val;
			break;
		default:
			ar8xxx_write(priv, reg, val);
			break;
		}
	}

	return 0;
}
#else
static inline int
ar8327_hw_config_of(struct ar8xxx_priv *priv, struct device_node *np)
{
	return -EINVAL;
}
#endif

static int
ar8327_hw_init(struct ar8xxx_priv *priv)
{
	int ret;

	priv->chip_data = kzalloc(sizeof(struct ar8327_data), GFP_KERNEL);
	if (!priv->chip_data)
		return -ENOMEM;

	if (priv->phy->dev.of_node)
		ret = ar8327_hw_config_of(priv, priv->phy->dev.of_node);
	else
		ret = ar8327_hw_config_pdata(priv,
					     priv->phy->dev.platform_data);

	if (ret)
		return ret;

	ar8327_leds_init(priv);

	ar8xxx_phy_init(priv);

	return 0;
}

static void
ar8327_cleanup(struct ar8xxx_priv *priv)
{
	ar8327_leds_cleanup(priv);
}

static void
ar8327_init_globals(struct ar8xxx_priv *priv)
{
	u32 t;

	/* enable CPU port and disable mirror port */
	t = AR8327_FWD_CTRL0_CPU_PORT_EN |
	    AR8327_FWD_CTRL0_MIRROR_PORT;
	ar8xxx_write(priv, AR8327_REG_FWD_CTRL0, t);

	/* forward multicast and broadcast frames to CPU */
	t = (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_UC_FLOOD_S) |
	    (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_MC_FLOOD_S) |
	    (AR8327_PORTS_ALL << AR8327_FWD_CTRL1_BC_FLOOD_S);
	ar8xxx_write(priv, AR8327_REG_FWD_CTRL1, t);

	/* enable jumbo frames */
	ar8xxx_rmw(priv, AR8327_REG_MAX_FRAME_SIZE,
		   AR8327_MAX_FRAME_SIZE_MTU, 9018 + 8 + 2);

	/* Enable MIB counters */
	ar8xxx_reg_set(priv, AR8327_REG_MODULE_EN,
		       AR8327_MODULE_EN_MIB);

	/* Disable EEE on all ports due to stability issues */
	t = ar8xxx_read(priv, AR8327_REG_EEE_CTRL);
	t |= AR8327_EEE_CTRL_DISABLE_PHY(0) |
	     AR8327_EEE_CTRL_DISABLE_PHY(1) |
	     AR8327_EEE_CTRL_DISABLE_PHY(2) |
	     AR8327_EEE_CTRL_DISABLE_PHY(3) |
	     AR8327_EEE_CTRL_DISABLE_PHY(4);
	ar8xxx_write(priv, AR8327_REG_EEE_CTRL, t);
}

static void
ar8327_init_port(struct ar8xxx_priv *priv, int port)
{
	struct ar8327_data *data = priv->chip_data;
	u32 t;

	if (port == AR8216_PORT_CPU)
		t = data->port0_status;
	else if (port == 6)
		t = data->port6_status;
	else
		t = AR8216_PORT_STATUS_LINK_AUTO;

	ar8xxx_write(priv, AR8327_REG_PORT_STATUS(port), t);
	ar8xxx_write(priv, AR8327_REG_PORT_HEADER(port), 0);

	t = 1 << AR8327_PORT_VLAN0_DEF_SVID_S;
	t |= 1 << AR8327_PORT_VLAN0_DEF_CVID_S;
	ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);

	t = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH << AR8327_PORT_VLAN1_OUT_MODE_S;
	ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);

	t = AR8327_PORT_LOOKUP_LEARN;
	t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
	ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
}

static u32
ar8327_read_port_status(struct ar8xxx_priv *priv, int port)
{
	return ar8xxx_read(priv, AR8327_REG_PORT_STATUS(port));
}

static int
ar8327_atu_flush(struct ar8xxx_priv *priv)
{
	int ret;

	ret = ar8216_wait_bit(priv, AR8327_REG_ATU_FUNC,
			      AR8327_ATU_FUNC_BUSY, 0);
	if (!ret)
		ar8xxx_write(priv, AR8327_REG_ATU_FUNC,
			    AR8327_ATU_FUNC_OP_FLUSH);

	return ret;
}

static void
ar8327_vtu_op(struct ar8xxx_priv *priv, u32 op, u32 val)
{
	if (ar8216_wait_bit(priv, AR8327_REG_VTU_FUNC1,
			    AR8327_VTU_FUNC1_BUSY, 0))
		return;

	if ((op & AR8327_VTU_FUNC1_OP) == AR8327_VTU_FUNC1_OP_LOAD)
		ar8xxx_write(priv, AR8327_REG_VTU_FUNC0, val);

	op |= AR8327_VTU_FUNC1_BUSY;
	ar8xxx_write(priv, AR8327_REG_VTU_FUNC1, op);
}

static void
ar8327_vtu_flush(struct ar8xxx_priv *priv)
{
	ar8327_vtu_op(priv, AR8327_VTU_FUNC1_OP_FLUSH, 0);
}

static void
ar8327_vtu_load_vlan(struct ar8xxx_priv *priv, u32 vid, u32 port_mask)
{
	u32 op;
	u32 val;
	int i;

	op = AR8327_VTU_FUNC1_OP_LOAD | (vid << AR8327_VTU_FUNC1_VID_S);
	val = AR8327_VTU_FUNC0_VALID | AR8327_VTU_FUNC0_IVL;
	for (i = 0; i < AR8327_NUM_PORTS; i++) {
		u32 mode;

		if ((port_mask & BIT(i)) == 0)
			mode = AR8327_VTU_FUNC0_EG_MODE_NOT;
		else if (priv->vlan == 0)
			mode = AR8327_VTU_FUNC0_EG_MODE_KEEP;
		else if ((priv->vlan_tagged & BIT(i)) || (priv->vlan_id[priv->pvid[i]] != vid))
			mode = AR8327_VTU_FUNC0_EG_MODE_TAG;
		else
			mode = AR8327_VTU_FUNC0_EG_MODE_UNTAG;

		val |= mode << AR8327_VTU_FUNC0_EG_MODE_S(i);
	}
	ar8327_vtu_op(priv, op, val);
}

static void
ar8327_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
{
	u32 t;
	u32 egress, ingress;
	u32 pvid = priv->vlan_id[priv->pvid[port]];

	if (priv->vlan) {
		egress = AR8327_PORT_VLAN1_OUT_MODE_UNMOD;
		ingress = AR8216_IN_SECURE;
	} else {
		egress = AR8327_PORT_VLAN1_OUT_MODE_UNTOUCH;
		ingress = AR8216_IN_PORT_ONLY;
	}

	t = pvid << AR8327_PORT_VLAN0_DEF_SVID_S;
	t |= pvid << AR8327_PORT_VLAN0_DEF_CVID_S;
	ar8xxx_write(priv, AR8327_REG_PORT_VLAN0(port), t);

	t = AR8327_PORT_VLAN1_PORT_VLAN_PROP;
	t |= egress << AR8327_PORT_VLAN1_OUT_MODE_S;
	ar8xxx_write(priv, AR8327_REG_PORT_VLAN1(port), t);

	t = members;
	t |= AR8327_PORT_LOOKUP_LEARN;
	t |= ingress << AR8327_PORT_LOOKUP_IN_MODE_S;
	t |= AR8216_PORT_STATE_FORWARD << AR8327_PORT_LOOKUP_STATE_S;
	ar8xxx_write(priv, AR8327_REG_PORT_LOOKUP(port), t);
}

static int
ar8327_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
{
	struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
	u8 ports = priv->vlan_table[val->port_vlan];
	int i;

	val->len = 0;
	for (i = 0; i < dev->ports; i++) {
		struct switch_port *p;

		if (!(ports & (1 << i)))
			continue;

		p = &val->value.ports[val->len++];
		p->id = i;
		if ((priv->vlan_tagged & (1 << i)) || (priv->pvid[i] != val->port_vlan))
			p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
		else
			p->flags = 0;
	}
	return 0;
}

static int
ar8327_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
{
	struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
	u8 *vt = &priv->vlan_table[val->port_vlan];
	int i;

	*vt = 0;
	for (i = 0; i < val->len; i++) {
		struct switch_port *p = &val->value.ports[i];

		if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
			if (val->port_vlan == priv->pvid[p->id]) {
				priv->vlan_tagged |= (1 << p->id);
			}
		} else {
			priv->vlan_tagged &= ~(1 << p->id);
			priv->pvid[p->id] = val->port_vlan;
		}

		*vt |= 1 << p->id;
	}
	return 0;
}

static void
ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
{
	int port;

	/* reset all mirror registers */
	ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
		   AR8327_FWD_CTRL0_MIRROR_PORT,
		   (0xF << AR8327_FWD_CTRL0_MIRROR_PORT_S));
	for (port = 0; port < AR8327_NUM_PORTS; port++) {
		ar8xxx_rmw(priv, AR8327_REG_PORT_LOOKUP(port),
			   AR8327_PORT_LOOKUP_ING_MIRROR_EN,
			   0);

		ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(port),
			   AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN,
			   0);
	}

	/* now enable mirroring if necessary */
	if (priv->source_port >= AR8327_NUM_PORTS ||
	    priv->monitor_port >= AR8327_NUM_PORTS ||
	    priv->source_port == priv->monitor_port) {
		return;
	}

	ar8xxx_rmw(priv, AR8327_REG_FWD_CTRL0,
		   AR8327_FWD_CTRL0_MIRROR_PORT,
		   (priv->monitor_port << AR8327_FWD_CTRL0_MIRROR_PORT_S));

	if (priv->mirror_rx)
		ar8xxx_rmw(priv, AR8327_REG_PORT_LOOKUP(priv->source_port),
			   AR8327_PORT_LOOKUP_ING_MIRROR_EN,
			   AR8327_PORT_LOOKUP_ING_MIRROR_EN);

	if (priv->mirror_tx)
		ar8xxx_rmw(priv, AR8327_REG_PORT_HOL_CTRL1(priv->source_port),
			   AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN,
			   AR8327_PORT_HOL_CTRL1_EG_MIRROR_EN);
}

static struct switch_attr ar8327_sw_attr_globals[] = {
	{
		.type = SWITCH_TYPE_INT,
		.name = "enable_vlan",
		.description = "Enable VLAN mode",
		.set = ar8xxx_sw_set_vlan,
		.get = ar8xxx_sw_get_vlan,
		.max = 1
	},
	{
		.type = SWITCH_TYPE_NOVAL,
		.name = "reset_mibs",
		.description = "Reset all MIB counters",
		.set = ar8xxx_sw_set_reset_mibs,
	},
	{
		.type = SWITCH_TYPE_INT,
		.name = "enable_mirror_rx",
		.description = "Enable mirroring of RX packets",
		.set = ar8xxx_sw_set_mirror_rx_enable,
		.get = ar8xxx_sw_get_mirror_rx_enable,
		.max = 1
	},
	{
		.type = SWITCH_TYPE_INT,
		.name = "enable_mirror_tx",
		.description = "Enable mirroring of TX packets",
		.set = ar8xxx_sw_set_mirror_tx_enable,
		.get = ar8xxx_sw_get_mirror_tx_enable,
		.max = 1
	},
	{
		.type = SWITCH_TYPE_INT,
		.name = "mirror_monitor_port",
		.description = "Mirror monitor port",
		.set = ar8xxx_sw_set_mirror_monitor_port,
		.get = ar8xxx_sw_get_mirror_monitor_port,
		.max = AR8327_NUM_PORTS - 1
	},
	{
		.type = SWITCH_TYPE_INT,
		.name = "mirror_source_port",
		.description = "Mirror source port",
		.set = ar8xxx_sw_set_mirror_source_port,
		.get = ar8xxx_sw_get_mirror_source_port,
		.max = AR8327_NUM_PORTS - 1
 	},
};

static const struct switch_dev_ops ar8327_sw_ops = {
	.attr_global = {
		.attr = ar8327_sw_attr_globals,
		.n_attr = ARRAY_SIZE(ar8327_sw_attr_globals),
	},
	.attr_port = {
		.attr = ar8xxx_sw_attr_port,
		.n_attr = ARRAY_SIZE(ar8xxx_sw_attr_port),
	},
	.attr_vlan = {
		.attr = ar8xxx_sw_attr_vlan,
		.n_attr = ARRAY_SIZE(ar8xxx_sw_attr_vlan),
	},
	.get_port_pvid = ar8xxx_sw_get_pvid,
	.set_port_pvid = ar8xxx_sw_set_pvid,
	.get_vlan_ports = ar8327_sw_get_ports,
	.set_vlan_ports = ar8327_sw_set_ports,
	.apply_config = ar8xxx_sw_hw_apply,
	.reset_switch = ar8xxx_sw_reset_switch,
	.get_port_link = ar8xxx_sw_get_port_link,
};

const struct ar8xxx_chip ar8327_chip = {
	.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
	.config_at_probe = true,
	.mii_lo_first = true,

	.name = "Atheros AR8327",
	.ports = AR8327_NUM_PORTS,
	.vlans = AR8X16_MAX_VLANS,
	.swops = &ar8327_sw_ops,

	.reg_port_stats_start = 0x1000,
	.reg_port_stats_length = 0x100,

	.hw_init = ar8327_hw_init,
	.cleanup = ar8327_cleanup,
	.init_globals = ar8327_init_globals,
	.init_port = ar8327_init_port,
	.setup_port = ar8327_setup_port,
	.read_port_status = ar8327_read_port_status,
	.atu_flush = ar8327_atu_flush,
	.vtu_flush = ar8327_vtu_flush,
	.vtu_load_vlan = ar8327_vtu_load_vlan,
	.phy_fixup = ar8327_phy_fixup,
	.set_mirror_regs = ar8327_set_mirror_regs,

	.num_mibs = ARRAY_SIZE(ar8236_mibs),
	.mib_decs = ar8236_mibs,
	.mib_func = AR8327_REG_MIB_FUNC
};

const struct ar8xxx_chip ar8337_chip = {
	.caps = AR8XXX_CAP_GIGE | AR8XXX_CAP_MIB_COUNTERS,
	.config_at_probe = true,
	.mii_lo_first = true,

	.name = "Atheros AR8337",
	.ports = AR8327_NUM_PORTS,
	.vlans = AR8X16_MAX_VLANS,
	.swops = &ar8327_sw_ops,

	.reg_port_stats_start = 0x1000,
	.reg_port_stats_length = 0x100,

	.hw_init = ar8327_hw_init,
	.cleanup = ar8327_cleanup,
	.init_globals = ar8327_init_globals,
	.init_port = ar8327_init_port,
	.setup_port = ar8327_setup_port,
	.read_port_status = ar8327_read_port_status,
	.atu_flush = ar8327_atu_flush,
	.vtu_flush = ar8327_vtu_flush,
	.vtu_load_vlan = ar8327_vtu_load_vlan,
	.phy_fixup = ar8327_phy_fixup,
	.set_mirror_regs = ar8327_set_mirror_regs,

	.num_mibs = ARRAY_SIZE(ar8236_mibs),
	.mib_decs = ar8236_mibs,
	.mib_func = AR8327_REG_MIB_FUNC
};