openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
Ludwig Thomeczek 43a7a1a05e ar71xx: add support for UniFi-AC-Mesh
This adds the build option for the new UniFi AC Mesh.
It is a direct hardware copy from the AC Lite.

- SoC: QCA9563-AL3A (775Mhz)
- RAM: 128MiB
- Flash: 16MiB - dual firmware partitions!
- LAN: 1 1000M - POE
- Wireless:
        2.4G: QCA9563
          5G: UniFi Chip, QCA988X compatible

Thanks to Frank Dietz for testing.

Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
[wrapped too long lines in mach-ubnt-unifiac.c]
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2017-05-15 22:43:33 +02:00

179 lines
4.6 KiB
C

/*
* Ubiquiti UniFi AC (LITE) board support
*
* Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
*
* Derived from: mach-ubnt-xm.c
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/etherdevice.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/irq.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <linux/platform_data/phy-at803x.h>
#include <linux/ar8216_platform.h>
#include "common.h"
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "dev-usb.h"
#include "machtypes.h"
#define UNIFIAC_KEYS_POLL_INTERVAL 20
#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
#define UNIFIAC_GPIO_LED_WHITE 7
#define UNIFIAC_GPIO_LED_BLUE 8
#define UNIFIAC_GPIO_BTN_RESET 2
#define UNIFIAC_MAC0_OFFSET 0x0000
#define UNIFIAC_WMAC_CALDATA_OFFSET 0x1000
#define UNIFIAC_PCI_CALDATA_OFFSET 0x5000
static struct flash_platform_data ubnt_unifiac_flash_data = {
/* mx25l12805d and mx25l12835f have the same JEDEC ID */
.type = "mx25l12805d",
};
static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
{
.name = "ubnt:white:dome",
.gpio = UNIFIAC_GPIO_LED_WHITE,
.active_low = 0,
}, {
.name = "ubnt:blue:dome",
.gpio = UNIFIAC_GPIO_LED_BLUE,
.active_low = 0,
}
};
static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
.gpio = UNIFIAC_GPIO_BTN_RESET,
.active_low = 1,
}
};
static void __init ubnt_unifiac_lite_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&ubnt_unifiac_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr,
eeprom + UNIFIAC_MAC0_OFFSET, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_pll_data.pll_10 = 0x00001313;
ath79_register_mdio(0, ~BIT(4));
ath79_register_eth(0);
ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
ubnt_unifiac_leds_gpio);
ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_unifiac_gpio_keys),
ubnt_unifiac_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_LITE, "UBNT-UF-AC-LITE",
"Ubiquiti UniFi-AC-LITE/MESH", ubnt_unifiac_lite_setup);
static struct ar8327_pad_cfg ubnt_unifiac_pro_ar8327_pad0_cfg = {
.mode = AR8327_PAD_MAC_SGMII,
.sgmii_delay_en = true,
};
static struct ar8327_platform_data ubnt_unifiac_pro_ar8327_data = {
.pad0_cfg = &ubnt_unifiac_pro_ar8327_pad0_cfg,
.port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
.txpause = 1,
.rxpause = 1,
},
};
static struct mdio_board_info ubnt_unifiac_pro_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
.phy_addr = 0,
.platform_data = &ubnt_unifiac_pro_ar8327_data,
},
};
static void __init ubnt_unifiac_pro_setup(void)
{
u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(&ubnt_unifiac_flash_data);
ath79_init_mac(ath79_eth0_data.mac_addr,
eeprom + UNIFIAC_MAC0_OFFSET, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
ath79_eth0_data.phy_mask = BIT(0);
mdiobus_register_board_info(ubnt_unifiac_pro_mdio0_info,
ARRAY_SIZE(ubnt_unifiac_pro_mdio0_info));
ath79_register_mdio(0, 0x00);
ath79_register_eth(0);
ath79_register_usb();
ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
ubnt_unifiac_leds_gpio);
ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ubnt_unifiac_gpio_keys),
ubnt_unifiac_gpio_keys);
}
MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC_PRO, "UBNT-UF-AC-PRO",
"Ubiquiti UniFi-AC-PRO", ubnt_unifiac_pro_setup);