openwrtv3/target/linux/ar71xx/files/arch/mips/ath79/mach-fritz300e.c
Mathias Kresin e7cd6f5d66 ar71xx: add AVM FRITZ!WLAN Repeater 300E support
Specifications:
* SoC: AR7242 (Virian 400MHz)
* RAM: 64 MB DDR (W9751G6JB-25)
* Flash: 16MB SPI flash (S25FL129PIF)
* WiFi: AR9382 (2.4/5GHz) + 2x SE2595L
* LAN: 1x1000M (PEF7071V)

To install LEDE via EVA bootloader, a FTP connection need to be
established to 192.168.178.1 within the first seconds after power on:

  ftp> quote USER adam2
  ftp> quote PASS adam2
  ftp> binary
  ftp> debug
  ftp> passive
  ftp> quote MEDIA FLSH
  ftp> put lede-ar71xx-generic-fritz300e-squashfs-sysupgrade.bin mtd1

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-06-24 22:36:38 +02:00

132 lines
3.1 KiB
C

/*
* AVM FRITZ!WLAN Repeater 300E board support
*
* Copyright (C) 2017 Mathias Kresin <dev@kresin.me>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include "dev-ap9x-pci.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "machtypes.h"
#define FRITZ300E_KEYS_POLL_INTERVAL 20 /* msecs */
#define FRITZ300E_KEYS_DEBOUNCE_INTERVAL (3 * FRITZ300E_KEYS_POLL_INTERVAL)
static struct mtd_partition fritz300e_flash_partitions[] = {
{
.name = "urloader",
.offset = 0,
.size = 0x0020000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "firmware",
.offset = 0x0020000,
.size = 0x0ee0000,
}, {
.name = "tffs (1)",
.offset = 0x0f00000,
.size = 0x0080000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "tffs (2)",
.offset = 0x0f80000,
.size = 0x0080000,
.mask_flags = MTD_WRITEABLE,
}
};
static struct flash_platform_data fritz300e_flash_data = {
.parts = fritz300e_flash_partitions,
.nr_parts = ARRAY_SIZE(fritz300e_flash_partitions),
};
static struct gpio_led fritz300e_leds_gpio[] __initdata = {
{
.name = "fritz300e:green:power",
.gpio = 13,
.active_low = 1,
}, {
.name = "fritz300e:green:lan",
.gpio = 15,
.active_low = 1,
}, {
.name = "fritz300e:green:wlan",
.gpio = 16,
.active_low = 1,
}
};
static struct gpio_led fritz300e_wmac_leds_gpio[] = {
{
.name = "fritz300e:green:rssi0",
.gpio = 10,
.active_low = 1,
}, {
.name = "fritz300e:green:rssi1",
.gpio = 4,
.active_low = 1,
}, {
.name = "fritz300e:green:rssi2",
.gpio = 6,
.active_low = 1,
}, {
.name = "fritz300e:green:rssi3",
.gpio = 7,
.active_low = 1,
}, {
.name = "fritz300e:green:rssi4",
.gpio = 5,
.active_low = 1,
}
};
static struct gpio_keys_button fritz300e_gpio_keys[] __initdata = {
{
.desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = FRITZ300E_KEYS_DEBOUNCE_INTERVAL,
.gpio = 12,
.active_low = 1,
},
};
static void __init fritz300e_setup(void)
{
/* get the Lantiq PEF7071V phy out of reset */
gpio_request_one(11, GPIOF_OUT_INIT_HIGH, "phy reset");
ath79_register_m25p80(&fritz300e_flash_data);
ath79_register_mdio(0, ~(BIT(0)));
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_eth(0);
ath79_register_leds_gpio(-1, ARRAY_SIZE(fritz300e_leds_gpio),
fritz300e_leds_gpio);
ath79_register_gpio_keys_polled(-1, FRITZ300E_KEYS_POLL_INTERVAL,
ARRAY_SIZE(fritz300e_gpio_keys),
fritz300e_gpio_keys);
ap9x_pci_setup_wmac_leds(0, fritz300e_wmac_leds_gpio,
ARRAY_SIZE(fritz300e_wmac_leds_gpio));
ap91_pci_init_simple();
}
MIPS_MACHINE(ATH79_MACH_FRITZ300E, "FRITZ300E",
"AVM FRITZ!WLAN Repeater 300E", fritz300e_setup);