openwrtv3/target/linux/lantiq/dts/GR7000.dts
blogic b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00

149 lines
2.5 KiB
Text

/dts-v1/;
/include/ "ar9.dtsi"
/ {
model = "GR7000 - Aztech GR7000";
chosen {
bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
leds {
boot = &power_red;
failsafe = &power_red;
internet = &internet_green;
usb = &usb;
wifi = &wifi;
};
};
memory@0 {
reg = <0x0 0x2000000>;
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "uboot_env";
reg = <0x20000 0x10000>;
read-only;
};
partition@30000 {
label = "firmware";
reg = <0x30000 0x7d0000>;
};
};
};
};
gpio: pinmux@E100B10 {
compatible = "lantiq,pinctrl-xr9";
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
pci-in {
lantiq,groups = "req1";
lantiq,output = <0>;
lantiq,open-drain = <1>;
lantiq,pull = <2>;
};
pci-out {
lantiq,groups = "gnt1";
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci_rst {
lantiq,pins = "io21";
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
ifxhcd@E101000 {
status = "okay";
};
pci@E105400 {
status = "okay";
};
stp: stp@E100BB0 {
compatible = "lantiq,gpio-stp-xway";
#gpio-cells = <2>;
gpio-controller;
reg = <0xE100BB0 0x40>;
lantiq,shadow = <0xfff>;
lantiq,groups = <0x3>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio 53 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio 54 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_red: power2 {
label = "gr7000:red:power";
gpios = <&stp 4 0>;
};
internet_green: internet {
label = "gr7000:green:internet";
gpios = <&stp 2 1>;
};
internet2 {
label = "gr7000:red:internet";
gpios = <&stp 3 1>;
};
usb: usb {
label = "gr7000:green:usb";
gpios = <&stp 10 1>;
};
wifi: wifi {
label = "gr7000:green:wireless";
gpios = <&stp 15 1>;
};
};
};