openwrtv3/target/linux/brcm63xx/patches-3.14/528-board_nb6.patch
Jonas Gorski 90c15beee6 brcm63xx: convert RTA1320 to dts
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 44563
2015-02-27 17:39:21 +00:00

145 lines
3.3 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -18,6 +18,7 @@
#if 0 /* FIXME: 3.14 removed non-DT support */
#include <linux/spi/74x164.h>
#endif
+#include <linux/rtl8367.h>
#include <asm/addrspace.h>
#include <bcm63xx_board.h>
#include <bcm63xx_cpu.h>
@@ -42,6 +43,8 @@
#define NB4_SPI_GPIO_MOSI 7
#define NB4_SPI_GPIO_CLK 6
#define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
+#define NB6_GPIO_RTL8367_SDA 18
+#define NB6_GPIO_RTL8367_SCK 20
#define CT6373_PID_OFFSET 0xff80
#define CT6373_74X164_GPIO_BASE 64
@@ -2370,6 +2373,104 @@ static struct board_info __initdata boar
};
#endif /* CONFIG_BCM63XX_CPU_6358 */
+#ifdef CONFIG_BCM63XX_CPU_6362
+static struct rtl8367_extif_config nb6_rtl8367_extif0_cfg = {
+ .mode = RTL8367_EXTIF_MODE_RGMII,
+ .txdelay = 1,
+ .rxdelay = 5,
+ .ability = {
+ .force_mode = 1,
+ .txpause = 1,
+ .rxpause = 1,
+ .link = 1,
+ .duplex = 1,
+ .speed = RTL8367_PORT_SPEED_1000,
+ },
+};
+
+static struct rtl8367_platform_data nb6_rtl8367_data = {
+ .gpio_sda = NB6_GPIO_RTL8367_SDA,
+ .gpio_sck = NB6_GPIO_RTL8367_SCK,
+ .extif0_cfg = &nb6_rtl8367_extif0_cfg,
+};
+
+static struct platform_device nb6_rtl8367_device = {
+ .name = RTL8367_DRIVER_NAME,
+ .id = -1,
+ .dev = {
+ .platform_data = &nb6_rtl8367_data,
+ }
+};
+
+static struct platform_device * __initdata nb6_devices[] = {
+ &nb6_rtl8367_device,
+};
+
+static struct board_info __initdata board_nb6 = {
+ .name = "NB6",
+ .expected_cpu_id = 0x6362,
+
+ .has_uart0 = 1,
+
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 2,
+
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [4] = {
+ .used = 1,
+ .phy_id = 0xff,
+ .bypass_link = 1,
+ .force_speed = 1000,
+ .force_duplex_full = 1,
+ .name = "RGMII",
+ },
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 24,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ },
+ {
+ .desc = "wps",
+ .gpio = 25,
+ .type = EV_KEY,
+ .code = KEY_WPS_BUTTON,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ },
+ {
+ .desc = "wlan",
+ .gpio = 12,
+ .type = EV_KEY,
+ .code = KEY_WLAN,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ },
+ {
+ .desc = "service",
+ .gpio = 10,
+ .type = EV_KEY,
+ .code = BTN_0,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ .active_low = 1,
+ },
+ },
+
+ .devs = nb6_devices,
+ .num_devs = ARRAY_SIZE(nb6_devices),
+};
+#endif /* CONFIG_BCM63XX_CPU_6362 */
+
/*
* known 6368 boards
*/
@@ -2573,6 +2674,10 @@ static const struct board_info __initcon
&board_DVAG3810BN,
#endif
+#ifdef CONFIG_BCM63XX_CPU_6362
+ &board_nb6,
+#endif
+
#ifdef CONFIG_BCM63XX_CPU_6368
&board_96368mvwg,
&board_96368mvngr,
@@ -2635,6 +2740,9 @@ static struct of_device_id const bcm963x
{ .compatible = "t-com,spw303v", .data = &board_spw303v, },
{ .compatible = "telsey,cpva642", .data = &board_CPVA642, },
#endif
+#ifdef CONFIG_BCM63XX_CPU_6362
+ { .compatible = "sfr,nb6-ser-r0", .data = &board_nb6, },
+#endif
#ifdef CONFIG_BCM63XX_CPU_6368
{ .compatible = "brcm,bcm96368mvngr", .data = &board_96368mvngr, },
{ .compatible = "brcm,bcm96368mvwg", .data = &board_96368mvwg, },