openwrtv3/package/mac80211/patches/840-b43-backport.patch
2012-05-17 13:22:38 +00:00

159 lines
5.5 KiB
Diff

--- a/drivers/net/wireless/b43/bus.c
+++ b/drivers/net/wireless/b43/bus.c
@@ -107,11 +107,9 @@ struct b43_bus_dev *b43_bus_dev_bcma_ini
dev->dma_dev = core->dma_dev;
dev->irq = core->irq;
- /*
dev->board_vendor = core->bus->boardinfo.vendor;
dev->board_type = core->bus->boardinfo.type;
- dev->board_rev = core->bus->boardinfo.rev;
- */
+ dev->board_rev = core->bus->sprom.board_rev;
dev->chip_id = core->bus->chipinfo.id;
dev->chip_rev = core->bus->chipinfo.rev;
@@ -210,7 +208,7 @@ struct b43_bus_dev *b43_bus_dev_ssb_init
dev->board_vendor = sdev->bus->boardinfo.vendor;
dev->board_type = sdev->bus->boardinfo.type;
- dev->board_rev = sdev->bus->boardinfo.rev;
+ dev->board_rev = sdev->bus->sprom.board_rev;
dev->chip_id = sdev->bus->chip_id;
dev->chip_rev = sdev->bus->chip_rev;
--- a/drivers/net/wireless/b43/dma.c
+++ b/drivers/net/wireless/b43/dma.c
@@ -1109,7 +1109,7 @@ static bool b43_dma_translation_in_low_w
#ifdef CONFIG_B43_SSB
if (dev->dev->bus_type == B43_BUS_SSB &&
dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
- !(dev->dev->sdev->bus->host_pci->is_pcie &&
+ !(pci_is_pcie(dev->dev->sdev->bus->host_pci) &&
ssb_read32(dev->dev->sdev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64))
return 1;
#endif
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4834,8 +4834,14 @@ static int b43_op_start(struct ieee80211
out_mutex_unlock:
mutex_unlock(&wl->mutex);
- /* reload configuration */
- b43_op_config(hw, ~0);
+ /*
+ * Configuration may have been overwritten during initialization.
+ * Reload the configuration, but only if initialization was
+ * successful. Reloading the configuration after a failed init
+ * may hang the system.
+ */
+ if (!err)
+ b43_op_config(hw, ~0);
return err;
}
@@ -5279,10 +5285,10 @@ static void b43_sprom_fixup(struct ssb_b
/* boardflags workarounds */
if (bus->boardinfo.vendor == SSB_BOARDVENDOR_DELL &&
- bus->chip_id == 0x4301 && bus->boardinfo.rev == 0x74)
+ bus->chip_id == 0x4301 && bus->sprom.board_rev == 0x74)
bus->sprom.boardflags_lo |= B43_BFL_BTCOEXIST;
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
- bus->boardinfo.type == 0x4E && bus->boardinfo.rev > 0x40)
+ bus->boardinfo.type == 0x4E && bus->sprom.board_rev > 0x40)
bus->sprom.boardflags_lo |= B43_BFL_PACTRL;
if (bus->bustype == SSB_BUSTYPE_PCI) {
pdev = bus->host_pci;
--- a/drivers/net/wireless/b43/sdio.c
+++ b/drivers/net/wireless/b43/sdio.c
@@ -193,7 +193,7 @@ static struct sdio_driver b43_sdio_drive
.name = "b43-sdio",
.id_table = b43_sdio_ids,
.probe = b43_sdio_probe,
- .remove = b43_sdio_remove,
+ .remove = __devexit_p(b43_sdio_remove),
};
int b43_sdio_init(void)
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1550,8 +1550,6 @@ static void b43legacy_request_firmware(s
const char *filename;
int err;
- /* do dummy read */
- ssb_read32(dev->dev, SSB_TMSHIGH);
if (!fw->ucode) {
if (rev == 2)
filename = "ucode2";
@@ -3758,7 +3756,7 @@ static void b43legacy_sprom_fixup(struct
/* boardflags workarounds */
if (bus->boardinfo.vendor == PCI_VENDOR_ID_APPLE &&
bus->boardinfo.type == 0x4E &&
- bus->boardinfo.rev > 0x40)
+ bus->sprom.board_rev > 0x40)
bus->sprom.boardflags_lo |= B43legacy_BFL_PACTRL;
}
--- a/drivers/net/wireless/b43legacy/phy.c
+++ b/drivers/net/wireless/b43legacy/phy.c
@@ -408,7 +408,7 @@ static void b43legacy_phy_setupg(struct
if (is_bcm_board_vendor(dev) &&
(dev->dev->bus->boardinfo.type == 0x0416) &&
- (dev->dev->bus->boardinfo.rev == 0x0017))
+ (dev->dev->bus->sprom.board_rev == 0x0017))
return;
b43legacy_ilt_write(dev, 0x5001, 0x0002);
@@ -424,7 +424,7 @@ static void b43legacy_phy_setupg(struct
if (is_bcm_board_vendor(dev) &&
(dev->dev->bus->boardinfo.type == 0x0416) &&
- (dev->dev->bus->boardinfo.rev == 0x0017))
+ (dev->dev->bus->sprom.board_rev == 0x0017))
return;
b43legacy_ilt_write(dev, 0x0401, 0x0002);
--- a/drivers/net/wireless/b43legacy/radio.c
+++ b/drivers/net/wireless/b43legacy/radio.c
@@ -1998,7 +1998,7 @@ u16 b43legacy_default_radio_attenuation(
if (phy->type == B43legacy_PHYTYPE_G) {
if (is_bcm_board_vendor(dev) &&
dev->dev->bus->boardinfo.type == 0x421 &&
- dev->dev->bus->boardinfo.rev >= 30)
+ dev->dev->bus->sprom.board_rev >= 30)
att = 3;
else if (is_bcm_board_vendor(dev) &&
dev->dev->bus->boardinfo.type == 0x416)
@@ -2008,7 +2008,7 @@ u16 b43legacy_default_radio_attenuation(
} else {
if (is_bcm_board_vendor(dev) &&
dev->dev->bus->boardinfo.type == 0x421 &&
- dev->dev->bus->boardinfo.rev >= 30)
+ dev->dev->bus->sprom.board_rev >= 30)
att = 7;
else
att = 6;
@@ -2018,7 +2018,7 @@ u16 b43legacy_default_radio_attenuation(
if (phy->type == B43legacy_PHYTYPE_G) {
if (is_bcm_board_vendor(dev) &&
dev->dev->bus->boardinfo.type == 0x421 &&
- dev->dev->bus->boardinfo.rev >= 30)
+ dev->dev->bus->sprom.board_rev >= 30)
att = 3;
else if (is_bcm_board_vendor(dev) &&
dev->dev->bus->boardinfo.type ==
@@ -2052,9 +2052,9 @@ u16 b43legacy_default_radio_attenuation(
}
if (is_bcm_board_vendor(dev) &&
dev->dev->bus->boardinfo.type == 0x421) {
- if (dev->dev->bus->boardinfo.rev < 0x43)
+ if (dev->dev->bus->sprom.board_rev < 0x43)
att = 2;
- else if (dev->dev->bus->boardinfo.rev < 0x51)
+ else if (dev->dev->bus->sprom.board_rev < 0x51)
att = 3;
}
if (att == 0xFFFF)