openwrtv3/target/linux/ramips/dts/WNDR3700V5.dts
Mathias Kresin 8f4dfadd5a ramips: add support for indicating the boot state using multiple leds
Use diag.sh version used for other targets supporting different leds
for the different boot states.

The existing led sequences should be the same as before.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-10-07 11:34:18 +02:00

147 lines
2.4 KiB
Text

/dts-v1/;
#include "mt7621.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
compatible = "netgear,wndr3700-v5", "mediatek,mt7621-soc";
model = "Netgear WNDR3700v5";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
memory@0 {
device_type = "memory";
reg = <0x0 0x8000000>;
};
chosen {
bootargs = "console=ttyS0,57600 maxcpus=2";
};
gpio-leds {
compatible = "gpio-leds";
wps {
label = "wndr3700v5:green:wps";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "wndr3700v5:green:power";
gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
poll-interval = <20>;
wps {
label = "wndr3700v5:wps";
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_WPS_BUTTON>;
};
wifi {
label = "wndr3700v5:wifi";
gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RFKILL>;
};
reset {
label = "wndr3700v5:reset";
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_RESTART>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usbpower {
gpio-export,name = "usbpower";
gpio-export,output = <1>;
gpios = <&gpio0 10 GPIO_ACTIVE_HIGH>;
};
};
};
&spi0 {
status = "okay";
mx25l12805d@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@f30000 {
label = "factory";
reg = <0xf30000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xee0000>;
};
};
};
};
&pcie {
status = "okay";
};
&pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x8000>;
ieee80211-freq-limit = <5000000 6000000>;
};
};
&pcie1 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
mediatek,mtd-eeprom = <&factory 0x0000>;
};
};
&ethernet {
mtd-mac-address = <&factory 0x0000000c>;
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "rgmii2", "mdio", "wdt";
ralink,function = "gpio";
};
};
};