openwrtv3/target/linux/apm821xx/sata/config-default
Christian Lamparter 4fc48a8cf2 apm821xx: replace recovery image for the MBL with initramfs
The patch "images: bump default rootfs size to 256 MB"
a1f83bad60 caused a crash
during boot for the recovery images. This is because
both variants of the MyBook Live only have 256MB of RAM
and for the recovery option, the ext4 rootfs was simply
stored in the RAMDISK.

This patch replaces recovery image for the MBL with an
initramfs kernel.

In order to boot the initramfs (for recovery or development):

0. copy the initramfs and device tree into tftp's server directory
   # cp *-initramfs-kernel.bin to /tftp-server/mbl.bin
   # cp *-ext4-kernel.dtb to /tftp-server/fdt.bin

1. Connect the MyBook Live (Duo) serial port.
   (Warning! Use a 3.3v level shifter).

2. Hit Enter during u-boot and insert these three lines:
   # setenv serverip 192.168.1.254; setenv ipaddr 192.168.1.1;
   # tftp ${kernel_addr_r} mbl.bin; tftp ${fdt_addr_r} fdt.bin
   # run addtty addmisc; bootm ${kernel_addr_r} - ${fdt_addr_r}

   Where 192.168.1.254 is your TFTP server.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-10-13 17:04:33 +02:00

40 lines
970 B
Text

# CONFIG_IKAREM is not set
CONFIG_APOLLO3G=y
CONFIG_EXT4_FS=y
CONFIG_DMADEVICES=y
CONFIG_DMA_ENGINE=y
CONFIG_DW_DMAC_CORE=y
CONFIG_DW_DMAC=y
# CONFIG_SATA_DWC_OLD_DMA is not set
# CONFIG_DW_DMAC_PCI is not set
CONFIG_ATA=y
CONFIG_ATA_SFF=y
CONFIG_ATA_BMDMA=y
CONFIG_SATA_PMP=y
CONFIG_GENERIC_PHY=y
CONFIG_SATA_DWC=y
# CONFIG_SATA_DWC_DEBUG is not set
CONFIG_EXT4_FS=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_74XX_MMIO=y
CONFIG_LEDS_TRIGGER_DISK=y
CONFIG_BLK_DEV_DM=y
CONFIG_BLK_DEV_DM_BUILTIN=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD=y
CONFIG_MD_AUTODETECT=y
# CONFIG_MD_LINEAR is not set
# CONFIG_MD_MULTIPATH is not set
CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
# CONFIG_MD_RAID456 is not set
CONFIG_PPC_EARLY_DEBUG=y
CONFIG_PPC_EARLY_DEBUG_44x=y
# CONFIG_PPC_EARLY_DEBUG_MEMCONS is not set
CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x4
CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300