openwrtv3/target/linux/adm5120/patches-3.3/a03-adm5120-remove-CONFIG_MTD_PARTITIONS.patch
Gabor Juhos 671361c7ea adm5120: add 3.3 support
Partially based on the 3.1 patches by Hartmut Knaack <knaack.h [at] gmx.de>

SVN-Revision: 31474
2012-04-25 12:57:33 +00:00

306 lines
9.1 KiB
Diff

--- a/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
+++ b/arch/mips/include/asm/mach-adm5120/adm5120_platform.h
@@ -28,10 +28,8 @@ struct adm5120_flash_platform_data {
void (*set_vpp)(struct map_info *, int);
void (*switch_bank)(unsigned);
u32 window_size;
-#ifdef CONFIG_MTD_PARTITIONS
unsigned int nr_parts;
struct mtd_partition *parts;
-#endif
};
struct adm5120_switch_platform_data {
--- a/arch/mips/adm5120/infineon/infineon.c
+++ b/arch/mips/adm5120/infineon/infineon.c
@@ -16,7 +16,6 @@
#define EASY_CONFIG_OFFSET 0x10000
#define EASY_CONFIG_SIZE 0x1000
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition easy_partitions[] = {
{
.name = "admboot",
@@ -33,7 +32,6 @@ static struct mtd_partition easy_partiti
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static __init void easy_setup_mac(void)
{
@@ -68,10 +66,8 @@ void __init easy_setup_pqfp(void)
gpio_direction_output(ADM5120_GPIO_PIN3, 0);
adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
adm5120_flash0_data.parts = easy_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_uart(0);
adm5120_add_device_uart(1);
@@ -100,10 +96,8 @@ void __init easy_setup_bga(void)
gpio_direction_output(ADM5120_GPIO_PIN5, 0);
adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
adm5120_flash0_data.parts = easy_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_uart(0);
adm5120_add_device_uart(1);
--- a/arch/mips/adm5120/cellvision/cellvision.c
+++ b/arch/mips/adm5120/cellvision/cellvision.c
@@ -19,7 +19,6 @@
#define CELLVISION_CONFIG_OFFSET 0x8000
#define CELLVISION_CONFIG_SIZE 0x1000
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition cas6xx_partitions[] = {
{
.name = "admboot",
@@ -65,7 +64,6 @@ static struct mtd_partition cas7xx_parti
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static void switch_bank_gpio5(unsigned bank)
{
@@ -105,20 +103,16 @@ void __init cellvision_mac_setup(void)
void __init cas6xx_flash_setup(void)
{
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
adm5120_flash0_data.parts = cas6xx_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
cellvision_flash_setup();
}
void __init cas7xx_flash_setup(void)
{
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
adm5120_flash0_data.parts = cas7xx_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
cellvision_flash_setup();
}
--- a/arch/mips/adm5120/edimax/br-61xx.c
+++ b/arch/mips/adm5120/edimax/br-61xx.c
@@ -18,7 +18,6 @@
#define BR61XX_CONFIG_OFFSET 0x8000
#define BR61XX_CONFIG_SIZE 0x1000
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition br61xx_partitions[] = {
{
.name = "admboot",
@@ -35,7 +34,6 @@ static struct mtd_partition br61xx_parti
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct gpio_button br61xx_gpio_buttons[] __initdata = {
{
@@ -68,10 +66,8 @@ static void __init br61xx_mac_setup(void
void __init br61xx_generic_setup(void)
{
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
adm5120_flash0_data.parts = br61xx_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_flash(0);
adm5120_add_device_gpio(BR61XX_GPIO_DEV_MASK);
--- a/arch/mips/adm5120/mikrotik/rb-1xx.c
+++ b/arch/mips/adm5120/mikrotik/rb-1xx.c
@@ -25,7 +25,6 @@ static struct adm5120_pci_irq rb1xx_pci_
PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
};
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition rb1xx_nor_parts[] = {
{
.name = "booter",
@@ -50,7 +49,6 @@ static struct mtd_partition rb1xx_nand_p
.size = MTDPART_SIZ_FULL
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
/*
* We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
@@ -79,10 +77,8 @@ static int rb1xx_nand_fixup(struct mtd_i
struct platform_nand_data rb1xx_nand_data __initdata = {
.chip = {
.nr_chips = 1,
-#ifdef CONFIG_MTD_PARTITIONS
.nr_partitions = ARRAY_SIZE(rb1xx_nand_parts),
.partitions = rb1xx_nand_parts,
-#endif /* CONFIG_MTD_PARTITIONS */
.chip_delay = RB1XX_NAND_CHIP_DELAY,
.options = NAND_NO_AUTOINCR,
.chip_fixup = rb1xx_nand_fixup,
@@ -114,10 +110,8 @@ static void __init rb1xx_mac_setup(void)
void __init rb1xx_add_device_flash(void)
{
/* setup data for flash0 device */
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
adm5120_flash0_data.parts = rb1xx_nor_parts;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_flash0_data.window_size = 128*1024;
adm5120_add_device_flash(0);
--- a/arch/mips/adm5120/compex/wp54.c
+++ b/arch/mips/adm5120/compex/wp54.c
@@ -11,7 +11,6 @@
#include "compex.h"
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition wp54g_wrt_partitions[] = {
{
.name = "cfe",
@@ -28,7 +27,6 @@ static struct mtd_partition wp54g_wrt_pa
.size = 0x010000,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
@@ -83,10 +81,8 @@ MIPS_MACHINE(MACH_ADM5120_WP54, "WP54",
static void __init wp54_wrt_setup(void)
{
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
adm5120_flash0_data.parts = wp54g_wrt_partitions;
-#endif
wp54_setup();
}
--- a/arch/mips/adm5120/zyxel/p-33x.c
+++ b/arch/mips/adm5120/zyxel/p-33x.c
@@ -16,7 +16,6 @@
#define P33X_GPIO_FLASH_A20 ADM5120_GPIO_PIN5
#define P33X_GPIO_DEV_MASK (1 << P33X_GPIO_FLASH_A20)
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition p33x_partitions[] = {
{
.name = "bootbase",
@@ -46,7 +45,6 @@ static struct mtd_partition p33x_partiti
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
@@ -75,10 +73,8 @@ void __init p33x_generic_setup(void)
gpio_request(P33X_GPIO_FLASH_A20, NULL); /* for flash A20 line */
gpio_direction_output(P33X_GPIO_FLASH_A20, 0);
adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
adm5120_flash0_data.parts = p33x_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_flash(0);
adm5120_add_device_uart(0);
--- a/arch/mips/adm5120/generic/eb-214a.c
+++ b/arch/mips/adm5120/generic/eb-214a.c
@@ -28,7 +28,6 @@
#define EB214A_GPIO_DEV_MASK 0
#define EB214A_CONFIG_OFFSET 0x4000
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition eb214a_partitions[] = {
{
.name = "bootloader",
@@ -45,7 +44,6 @@ static struct mtd_partition eb214a_parti
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct adm5120_pci_irq eb214a_pci_irqs[] __initdata = {
PCIIRQ(4, 0, 1, ADM5120_IRQ_PCI0),
@@ -94,10 +92,8 @@ static void __init eb214a_mac_setup(void
static void __init eb214a_setup(void)
{
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(eb214a_partitions);
adm5120_flash0_data.parts = eb214a_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_flash(0);
adm5120_add_device_gpio(EB214A_GPIO_DEV_MASK);
--- a/arch/mips/adm5120/motorola/pmugw.c
+++ b/arch/mips/adm5120/motorola/pmugw.c
@@ -26,7 +26,6 @@
#define PMUGW_CONFIG_OFFSET 0x10000
#define PMUGW_CONFIG_SIZE 0x1000
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition pmugw_partitions[] = {
{
.name = "admboot",
@@ -43,7 +42,6 @@ static struct mtd_partition pmugw_partit
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static u8 pmugw_vlans[6] __initdata = {
0x41, 0x42, 0x44, 0x48, 0x50, 0x00
@@ -82,10 +80,8 @@ void __init pmugw_setup(void)
gpio_direction_output(ADM5120_GPIO_PIN5, 0);
adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(pmugw_partitions);
adm5120_flash0_data.parts = pmugw_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_uart(1); /* ttyS0 */
adm5120_add_device_uart(0); /* ttyS1 */
--- a/arch/mips/adm5120/osbridge/5gxi.c
+++ b/arch/mips/adm5120/osbridge/5gxi.c
@@ -20,7 +20,6 @@
#include <asm/mach-adm5120/adm5120_platform.h>
#include <asm/mach-adm5120/adm5120_info.h>
-#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition osbridge_5gxi_partitions[] = {
{
.name = "bootloader",
@@ -37,7 +36,6 @@ static struct mtd_partition osbridge_5gx
.size = MTDPART_SIZ_FULL,
}
};
-#endif /* CONFIG_MTD_PARTITIONS */
static struct gpio_led osbridge_5gxi_gpio_leds[] __initdata = {
GPIO_LED_INV(ADM5120_GPIO_PIN6, "5gxi:green:user", NULL),
@@ -54,10 +52,8 @@ static u8 osbridge_5gxi_vlans[6] __initd
static void __init osbridge_5gxi_setup(void)
{
-#ifdef CONFIG_MTD_PARTITIONS
adm5120_flash0_data.nr_parts = ARRAY_SIZE(osbridge_5gxi_partitions);
adm5120_flash0_data.parts = osbridge_5gxi_partitions;
-#endif /* CONFIG_MTD_PARTITIONS */
adm5120_add_device_uart(0);
adm5120_add_device_uart(1);