openwrtv3/target/linux/brcm63xx/patches-3.10/512-board_BTV2110.patch
Jonas Gorski e5cadabb58 brcm63xx: Fix HW553 support
- adsl and lan leds are swapped.
- internetkey is labeled as hspa.
- enable status led and reset button for failsafe.
- use new leds script.
- fix switch configuration.
- remove enet0 from board_info.
- add profile.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41588
2014-07-12 12:31:39 +00:00

75 lines
1.5 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -471,6 +471,64 @@ static struct board_info __initdata boar
},
};
+
+/* BT Voyager 2110 */
+static struct board_info __initdata board_V2110 = {
+ .name = "V2110",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet1 = 1,
+ .has_pci = 1,
+
+ .enet1 = {
+ .has_phy = 1,
+ .phy_id = 0,
+ .force_speed_100 = 1,
+ .force_duplex_full = 1,
+ },
+
+ .leds = {
+ {
+ .name = "V2110:green:power",
+ .gpio = 0,
+ .active_low = 1,
+ .default_trigger = "default-on",
+ },
+ {
+ .name = "V2110:red:power",
+ .gpio = 1,
+ .active_low = 1,
+ },
+ {
+ .name = "V2110:green:adsl",
+ .gpio = 2,
+ .active_low = 1,
+ },
+ { .name = "V2110:green:ppp",
+ .gpio = 3,
+ .active_low = 1,
+ },
+ {
+ .name = "V2110:green:wireless",
+ .gpio = 6,
+ .active_low = 1,
+ },
+ },
+
+ .buttons = {
+ {
+ .desc = "reset",
+ .gpio = 33,
+ .active_low = 1,
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
+ },
+ },
+};
+
+
static struct board_info __initdata board_96348gw = {
.name = "96348GW",
.expected_cpu_id = 0x6348,
@@ -2034,6 +2092,7 @@ static const struct board_info __initcon
&board_spw500v,
&board_96348sv,
&board_V2500V_BB,
+ &board_V2110,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358