openwrtv3/target/linux/ramips
John Crispin 8c1f5141ce ralink: add support for netis WF-2881
netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 47619
2015-11-24 18:29:26 +00:00
..
base-files ralink: add support for netis WF-2881 2015-11-24 18:29:26 +00:00
dts ralink: add support for netis WF-2881 2015-11-24 18:29:26 +00:00
files ramips: fix for kernel 4.0 napi repoll need return budgets number 2015-10-30 22:32:49 +00:00
image ralink: add support for netis WF-2881 2015-11-24 18:29:26 +00:00
mt7620 ramips: add support for Dovado tiny AC 2015-11-02 10:17:51 +00:00
mt7621 ralink: add support for netis WF-2881 2015-11-24 18:29:26 +00:00
mt7628 ramips: add alsa support 2015-10-19 10:07:54 +00:00
mt7688 ramips: add LinkIt Smart7688 support 2015-10-19 10:07:38 +00:00
patches-3.18 ramips: add second spi master sysclk 2015-11-24 18:28:54 +00:00
rt288x ramips: disable the openwrt commandline hack 2015-08-30 12:18:14 +00:00
rt305x ramips: rt305x: enable seama mtdsplit parser 2015-11-02 10:16:56 +00:00
rt3883 ramips: disable the openwrt commandline hack 2015-08-30 12:18:14 +00:00
base-files.mk ramips: remove default network configuration, and generate that from uci-defaults 2011-12-01 22:48:51 +00:00
Makefile ralink: add support for netis WF-2881 2015-11-24 18:29:26 +00:00
modules.mk ramips: add alsa support 2015-10-19 10:07:54 +00:00