KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
openwrtv3/package/network/services/dnsmasq/Makefile
Christian Lamparter 7ffb707576 dnsmasq: add listen_address parameter 
This patch adds a parser for the uci representation of
dnsmasq's "-a | --listen-address" option.

In summary, this option forces dnsmasq to listen on the
given IP address(es). Both interface and listen-address
options may be given, in which case the set of both
interfaces and addresses is used.

Note that if no interface option is given, but listen_address is,
dnsmasq will not automatically listen on the loopback interface.
To achieve this, the loopback IP addresses, 127.0.0.1 and/or ::1
must be explicitly added.

This option is useful for ujailed dnsmasq instances, that would
otherwise fail to work properly, because listening to the
"This host on this network" address (aka 0.0.0.0 see rfc1700 page 4)
may not be allowed.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> (PKG_RELEASE increase)
2017-10-13 16:54:58 +02:00

179 lines
5.4 KiB
Makefile
Raw Blame History

#
# Copyright (C) 2006-2016 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
PKG_NAME:=dnsmasq
PKG_VERSION:=2.78
PKG_RELEASE:=2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz
PKG_SOURCE_URL:=http://thekelleys.org.uk/dnsmasq/
PKG_HASH:=89949f438c74b0c7543f06689c319484bd126cc4b1f8c745c742ab397681252b
PKG_LICENSE:=GPL-2.0
PKG_LICENSE_FILES:=COPYING
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
PKG_INSTALL:=1
PKG_BUILD_PARALLEL:=1
PKG_CONFIG_DEPENDS:=CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6 \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid \
CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc
include $(INCLUDE_DIR)/package.mk
define Package/dnsmasq/Default
SECTION:=net
CATEGORY:=Base system
TITLE:=DNS and DHCP server
URL:=http://www.thekelleys.org.uk/dnsmasq/
DEPENDS:=+libubus
USERID:=dnsmasq=453:dnsmasq=453
endef
define Package/dnsmasq
$(call Package/dnsmasq/Default)
VARIANT:=nodhcpv6
endef
define Package/dnsmasq-dhcpv6
$(call Package/dnsmasq/Default)
TITLE += (with DHCPv6 support)
DEPENDS+=@IPV6
VARIANT:=dhcpv6
endef
define Package/dnsmasq-full
$(call Package/dnsmasq/Default)
TITLE += (with DNSSEC, DHCPv6, Auth DNS, IPset, Conntrack, NO_ID enabled by default)
DEPENDS+=+PACKAGE_dnsmasq_full_dnssec:libnettle \
+PACKAGE_dnsmasq_full_ipset:kmod-ipt-ipset \
+PACKAGE_dnsmasq_full_conntrack:libnetfilter-conntrack
VARIANT:=full
endef
define Package/dnsmasq/description
It is intended to provide coupled DNS and DHCP service to a LAN.
endef
define Package/dnsmasq-dhcpv6/description
$(call Package/dnsmasq/description)
This is a variant with DHCPv6 support
endef
define Package/dnsmasq-full/description
$(call Package/dnsmasq/description)
This is a fully configurable variant with DHCPv6, DNSSEC, Authoritative DNS and
IPset, Conntrack support & NO_ID enabled by default.
endef
define Package/dnsmasq/conffiles
/etc/config/dhcp
/etc/dnsmasq.conf
endef
define Package/dnsmasq-full/config
if PACKAGE_dnsmasq-full
config PACKAGE_dnsmasq_full_dhcpv6
bool "Build with DHCPv6 support."
depends on IPV6
default y
config PACKAGE_dnsmasq_full_dnssec
bool "Build with DNSSEC support."
default y
config PACKAGE_dnsmasq_full_auth
bool "Build with the facility to act as an authoritative DNS server."
default y
config PACKAGE_dnsmasq_full_ipset
bool "Build with IPset support."
default y
config PACKAGE_dnsmasq_full_conntrack
bool "Build with Conntrack support."
default y
config PACKAGE_dnsmasq_full_noid
bool "Build with NO_ID. (hide *.bind pseudo domain)"
default y
config PACKAGE_dnsmasq_full_broken_rtc
bool "Build with HAVE_BROKEN_RTC."
default n
endif
endef
Package/dnsmasq-dhcpv6/conffiles = $(Package/dnsmasq/conffiles)
Package/dnsmasq-full/conffiles = $(Package/dnsmasq/conffiles)
TARGET_CFLAGS += -ffunction-sections -fdata-sections
TARGET_LDFLAGS += -Wl,--gc-sections
COPTS = $(if $(CONFIG_IPV6),,-DNO_IPV6)
ifeq ($(BUILD_VARIANT),nodhcpv6)
COPTS += -DNO_DHCP6
endif
ifeq ($(BUILD_VARIANT),full)
COPTS += $(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dhcpv6),,-DNO_DHCP6) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_dnssec),-DHAVE_DNSSEC) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_auth),,-DNO_AUTH) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_ipset),,-DNO_IPSET) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_conntrack),-DHAVE_CONNTRACK,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_noid),-DNO_ID,) \
$(if $(CONFIG_PACKAGE_dnsmasq_$(BUILD_VARIANT)_broken_rtc),-DHAVE_BROKEN_RTC)
COPTS += $(if $(CONFIG_LIBNETTLE_MINI),-DNO_GMP,)
else
COPTS += -DNO_AUTH -DNO_IPSET -DNO_ID
endif
MAKE_FLAGS := \
$(TARGET_CONFIGURE_OPTS) \
CFLAGS="$(TARGET_CFLAGS) $(TARGET_CPPFLAGS)" \
LDFLAGS="$(TARGET_LDFLAGS)" \
COPTS="$(COPTS)" \
PREFIX="/usr"
define Package/dnsmasq/install
$(INSTALL_DIR) $(1)/usr/sbin
$(CP) $(PKG_INSTALL_DIR)/usr/sbin/dnsmasq $(1)/usr/sbin/
$(INSTALL_DIR) $(1)/etc/config
$(INSTALL_DATA) ./files/dhcp.conf $(1)/etc/config/dhcp
$(INSTALL_DATA) ./files/dnsmasq.conf $(1)/etc/dnsmasq.conf
$(INSTALL_DIR) $(1)/etc/init.d
$(INSTALL_BIN) ./files/dnsmasq.init $(1)/etc/init.d/dnsmasq
$(INSTALL_DIR) $(1)/etc/hotplug.d/dhcp
$(INSTALL_DIR) $(1)/etc/hotplug.d/neigh
$(INSTALL_DIR) $(1)/etc/hotplug.d/ntp
$(INSTALL_DIR) $(1)/etc/hotplug.d/tftp
$(INSTALL_DATA) ./files/dnsmasqsec.hotplug $(1)/etc/hotplug.d/ntp/25-dnsmasqsec
$(INSTALL_DIR) $(1)/usr/share/dnsmasq
$(INSTALL_DATA) ./files/rfc6761.conf $(1)/usr/share/dnsmasq/
$(INSTALL_DIR) $(1)/usr/lib/dnsmasq
$(INSTALL_BIN) ./files/dhcp-script.sh $(1)/usr/lib/dnsmasq/dhcp-script.sh
$(INSTALL_DIR) $(1)/usr/share/acl.d
$(INSTALL_DATA) ./files/dnsmasq_acl.json $(1)/usr/share/acl.d/
endef
Package/dnsmasq-dhcpv6/install = $(Package/dnsmasq/install)
define Package/dnsmasq-full/install
$(call Package/dnsmasq/install,$(1))
ifneq ($(CONFIG_PACKAGE_dnsmasq_full_dnssec),)
$(INSTALL_DIR) $(1)/usr/share/dnsmasq
$(INSTALL_DATA) $(PKG_BUILD_DIR)/trust-anchors.conf $(1)/usr/share/dnsmasq
endif
endef
$(eval $(call BuildPackage,dnsmasq))
$(eval $(call BuildPackage,dnsmasq-dhcpv6))
$(eval $(call BuildPackage,dnsmasq-full))
Reference in a new issue View git blame Copy permalink