openwrtv3/target/linux/brcm2708/patches-4.4/0089-scripts-Multi-platform-support-for-mkknlimg-and-knli.patch
Álvaro Fernández Rojas 3fc661a98c brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y
Also alphabetically order sound-soc kernel packages.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 21:23:21 +02:00

247 lines
7.1 KiB
Diff

From 5e591b39b106e20e3f8128cbd46a20d01eedb185 Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Wed, 11 Nov 2015 11:38:59 +0000
Subject: [PATCH 089/381] scripts: Multi-platform support for mkknlimg and
knlinfo
The firmware uses tags in the kernel trailer to choose which dtb file
to load. Current firmware loads bcm2835-*.dtb if the '283x' tag is true,
otherwise it loads bcm270*.dtb. This scheme breaks if an image supports
multiple platforms.
This patch adds '270X' and '283X' tags to indicate support for RPi and
upstream platforms, respectively. '283x' (note lower case 'x') is left
for old firmware, and is only set if the image only supports upstream
builds.
---
scripts/knlinfo | 2 +
scripts/mkknlimg | 136 +++++++++++++++++++++++++++++++------------------------
2 files changed, 80 insertions(+), 58 deletions(-)
--- a/scripts/knlinfo
+++ b/scripts/knlinfo
@@ -18,6 +18,8 @@ my %atom_formats =
(
'DTOK' => \&format_bool,
'KVer' => \&format_string,
+ '270X' => \&format_bool,
+ '283X' => \&format_bool,
'283x' => \&format_bool,
);
--- a/scripts/mkknlimg
+++ b/scripts/mkknlimg
@@ -13,12 +13,20 @@ use strict;
use warnings;
use integer;
+use constant FLAG_PI => 0x01;
+use constant FLAG_DTOK => 0x02;
+use constant FLAG_DDTK => 0x04;
+use constant FLAG_270X => 0x08;
+use constant FLAG_283X => 0x10;
+
my $trailer_magic = 'RPTL';
my $tmpfile1 = "/tmp/mkknlimg_$$.1";
my $tmpfile2 = "/tmp/mkknlimg_$$.2";
my $dtok = 0;
+my $ddtk = 0;
+my $is_270x = 0;
my $is_283x = 0;
while (@ARGV && ($ARGV[0] =~ /^-/))
@@ -28,6 +36,14 @@ while (@ARGV && ($ARGV[0] =~ /^-/))
{
$dtok = 1;
}
+ elsif ($arg eq '--ddtk')
+ {
+ $ddtk = 1;
+ }
+ elsif ($arg eq '--270x')
+ {
+ $is_270x = 1;
+ }
elsif ($arg eq '--283x')
{
$is_283x = 1;
@@ -50,30 +66,33 @@ if (! -r $kernel_file)
usage();
}
-my @wanted_strings =
-(
- 'bcm2708_fb',
- 'brcm,bcm2835-mmc',
- 'brcm,bcm2835-sdhost',
- 'brcm,bcm2708-pinctrl',
- 'brcm,bcm2835-gpio',
- 'brcm,bcm2835',
- 'brcm,bcm2836'
-);
+my $wanted_strings =
+{
+ 'bcm2708_fb' => FLAG_PI,
+ 'brcm,bcm2835-mmc' => FLAG_PI,
+ 'brcm,bcm2835-sdhost' => FLAG_PI,
+ 'brcm,bcm2708-pinctrl' => FLAG_PI | FLAG_DTOK,
+ 'brcm,bcm2835-gpio' => FLAG_PI | FLAG_DTOK,
+ 'brcm,bcm2708' => FLAG_PI | FLAG_DTOK | FLAG_270X,
+ 'brcm,bcm2709' => FLAG_PI | FLAG_DTOK | FLAG_270X,
+ 'brcm,bcm2835' => FLAG_PI | FLAG_DTOK | FLAG_283X,
+ 'brcm,bcm2836' => FLAG_PI | FLAG_DTOK | FLAG_283X,
+ 'of_overlay_apply' => FLAG_DTOK | FLAG_DDTK,
+};
my $res = try_extract($kernel_file, $tmpfile1);
-$res = try_decompress('\037\213\010', 'xy', 'gunzip', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('BZh', 'xy', 'bunzip2', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\211\114\132', 'xy', 'lzop -d', 0,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
-$res = try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1,
- $kernel_file, $tmpfile1, $tmpfile2) if (!$res);
+$res ||= try_decompress('\037\213\010', 'xy', 'gunzip', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\3757zXZ\000', 'abcde', 'unxz --single-stream', -1,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('BZh', 'xy', 'bunzip2', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\135\0\0\0', 'xxx', 'unlzma', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\211\114\132', 'xy', 'lzop -d', 0,
+ $kernel_file, $tmpfile1, $tmpfile2);
+$res ||= try_decompress('\002\041\114\030', 'xy', 'lz4 -d', 1,
+ $kernel_file, $tmpfile1, $tmpfile2);
my $append_trailer;
my $trailer;
@@ -83,27 +102,21 @@ $append_trailer = $dtok;
if ($res)
{
- $kver = $res->{''} || '?';
+ $kver = $res->{'kver'} || '?';
+ my $flags = $res->{'flags'};
print("Version: $kver\n");
- $append_trailer = $dtok;
- if (!$dtok)
+ if ($flags & FLAG_PI)
{
- if (config_bool($res, 'bcm2708_fb') ||
- config_bool($res, 'brcm,bcm2835-mmc') ||
- config_bool($res, 'brcm,bcm2835-sdhost'))
- {
- $dtok ||= config_bool($res, 'brcm,bcm2708-pinctrl');
- $dtok ||= config_bool($res, 'brcm,bcm2835-gpio');
- $is_283x ||= config_bool($res, 'brcm,bcm2835');
- $is_283x ||= config_bool($res, 'brcm,bcm2836');
- $dtok ||= $is_283x;
- $append_trailer = 1;
- }
- else
- {
- print ("* This doesn't look like a Raspberry Pi kernel. In pass-through mode.\n");
- }
+ $append_trailer = 1;
+ $dtok ||= ($flags & FLAG_DTOK) != 0;
+ $is_270x ||= ($flags & FLAG_270X) != 0;
+ $is_283x ||= ($flags & FLAG_283X) != 0;
+ $ddtk ||= ($flags & FLAG_DDTK) != 0;
+ }
+ else
+ {
+ print ("* This doesn't look like a Raspberry Pi kernel. In pass-through mode.\n");
}
}
elsif (!$dtok)
@@ -114,6 +127,8 @@ elsif (!$dtok)
if ($append_trailer)
{
printf("DT: %s\n", $dtok ? "y" : "n");
+ printf("DDT: %s\n", $ddtk ? "y" : "n") if ($ddtk);
+ printf("270x: %s\n", $is_270x ? "y" : "n");
printf("283x: %s\n", $is_283x ? "y" : "n");
my @atoms;
@@ -121,7 +136,10 @@ if ($append_trailer)
push @atoms, [ $trailer_magic, pack('V', 0) ];
push @atoms, [ 'KVer', $kver ];
push @atoms, [ 'DTOK', pack('V', $dtok) ];
- push @atoms, [ '283x', pack('V', $is_283x) ];
+ push @atoms, [ 'DDTK', pack('V', $ddtk) ] if ($ddtk);
+ push @atoms, [ '270X', pack('V', $is_270x) ];
+ push @atoms, [ '283X', pack('V', $is_283x) ];
+ push @atoms, [ '283x', pack('V', $is_283x && !$is_270x) ];
$trailer = pack_trailer(\@atoms);
$atoms[0]->[1] = pack('V', length($trailer));
@@ -175,7 +193,7 @@ END {
sub usage
{
- print ("Usage: mkknlimg [--dtok] [--283x] <vmlinux|zImage|bzImage> <outfile>\n");
+ print ("Usage: mkknlimg [--dtok] [--270x] [--283x] <vmlinux|zImage|bzImage> <outfile>\n");
exit(1);
}
@@ -189,15 +207,8 @@ sub try_extract
chomp($ver);
- my $res = { ''=>$ver };
- my $string_pattern = '^('.join('|', @wanted_strings).')$';
-
- my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`;
- foreach my $match (@matches)
- {
- chomp($match);
- $res->{$match} = 1;
- }
+ my $res = { 'kver'=>$ver };
+ $res->{'flags'} = strings_to_flags($knl, $wanted_strings);
return $res;
}
@@ -224,6 +235,22 @@ sub try_decompress
return undef;
}
+sub strings_to_flags
+{
+ my ($knl, $strings) = @_;
+ my $string_pattern = '^('.join('|', keys(%$strings)).')$';
+ my $flags = 0;
+
+ my @matches = `strings \"$knl\" | grep -E \"$string_pattern\"`;
+ foreach my $match (@matches)
+ {
+ chomp($match);
+ $flags |= $strings->{$match};
+ }
+
+ return $flags;
+}
+
sub pack_trailer
{
my ($atoms) = @_;
@@ -235,10 +262,3 @@ sub pack_trailer
}
return $trailer;
}
-
-sub config_bool
-{
- my ($configs, $wanted) = @_;
- my $val = $configs->{$wanted} || 'n';
- return (($val eq 'y') || ($val eq '1'));
-}