openwrtv3/target/linux/brcm63xx/patches-3.18/531-board_AR-5387un.patch
Jonas Gorski 3a9e4ba896 brcm63xx: unbreak board_probe_switch again
Also move it to an earlier place so new boards added are less likely
to confuse quilt.

Fixes #19965.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46148
2015-06-30 23:26:02 +00:00

98 lines
2.7 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -143,6 +143,79 @@ static struct board_info __initdata boar
},
};
+static struct sprom_fixup __initdata ar5387un_fixups[] = {
+ { .offset = 2, .value = 0x05bb },
+ { .offset = 65, .value = 0x1204 },
+ { .offset = 78, .value = 0x0303 },
+ { .offset = 79, .value = 0x0202 },
+ { .offset = 80, .value = 0xff02 },
+ { .offset = 87, .value = 0x0315 },
+ { .offset = 88, .value = 0x0315 },
+ { .offset = 96, .value = 0x2048 },
+ { .offset = 97, .value = 0xff11 },
+ { .offset = 98, .value = 0x1567 },
+ { .offset = 99, .value = 0xfb24 },
+ { .offset = 100, .value = 0x3e3c },
+ { .offset = 101, .value = 0x4038 },
+ { .offset = 102, .value = 0xfe7f },
+ { .offset = 103, .value = 0x1279 },
+ { .offset = 112, .value = 0x2048 },
+ { .offset = 113, .value = 0xff03 },
+ { .offset = 114, .value = 0x154c },
+ { .offset = 115, .value = 0xfb27 },
+ { .offset = 116, .value = 0x3e3c },
+ { .offset = 117, .value = 0x4038 },
+ { .offset = 118, .value = 0xfe87 },
+ { .offset = 119, .value = 0x1233 },
+ { .offset = 203, .value = 0x2226 },
+};
+
+static struct board_info __initdata board_AR5387un = {
+ .name = "96328A-1441N1",
+ .expected_cpu_id = 0x6328,
+
+ .has_uart0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+ .has_ohci0 = 1,
+ .has_ehci0 = 1,
+ .num_usbh_ports = 1,
+ .has_enetsw = 1,
+
+ .enetsw = {
+ .used_ports = {
+ [0] = {
+ .used = 1,
+ .phy_id = 1,
+ .name = "Port 1",
+ },
+ [1] = {
+ .used = 1,
+ .phy_id = 2,
+ .name = "Port 2",
+ },
+ [2] = {
+ .used = 1,
+ .phy_id = 3,
+ .name = "Port 3",
+ },
+ [3] = {
+ .used = 1,
+ .phy_id = 4,
+ .name = "Port 4",
+ },
+ },
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM43225,
+ .pci_bus = 1,
+ .pci_dev = 0,
+ .board_fixups = ar5387un_fixups,
+ .num_board_fixups = ARRAY_SIZE(ar5387un_fixups),
+ },
+};
+
static struct board_info __initdata board_963281TAN = {
.name = "963281TAN",
.expected_cpu_id = 0x6328,
@@ -1549,6 +1622,7 @@ static const struct board_info __initcon
#endif
#ifdef CONFIG_BCM63XX_CPU_6328
&board_96328avng,
+ &board_AR5387un,
&board_963281TAN,
&board_A4001N1,
&board_dsl_274xb_f1,
@@ -1619,6 +1693,7 @@ static struct of_device_id const bcm963x
{ .compatible = "adb,a4001n1", .data = &board_A4001N1, },
{ .compatible = "brcm,bcm963281TAN", .data = &board_963281TAN, },
{ .compatible = "brcm,bcm96328avng", .data = &board_96328avng, },
+ { .compatible = "comtrend,ar-5387un", .data = &board_AR5387un, },
{ .compatible = "d-link,dsl-274xb-f", .data = &board_dsl_274xb_f1, },
#endif
#ifdef CONFIG_BCM63XX_CPU_6338